Lumantek ez-Distributor Bruksanvisning

Lumantek mottagare ez-Distributor

Läs nedan 📖 manual på svenska för Lumantek ez-Distributor (12 sidor) i kategorin mottagare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
ez-Distributor
3G-SDI/ HDMI
DISTRIBUTION AMPLIFER
AUDIO MUX/ DEMUX
OPERATION MANUAL
Revision Number: 1.0.0
Distribution Date: MAY. 2018
Copyrights Notice
Copyright : 2006-2018 LUMANTEK Co., Ltd.
All Rights Reserved.
This document contains information that is proprietary to LUMANTEK. CO., LTD. The
information in this document is believed to be accurate and reliable; however, LUMANTEK
assumes no responsibility or liability for any errors or inaccuracies that may appear in this
document, nor for any infringements of patents or other rights to third parties resulting
from its use.
This publication may contain technical issues, inaccurate information or typos. These will be
revised in revised editions, if there is any. No part of this publication is subject to be
reproduced, stored in retrieval system, or transmitted in any forms, or any means without
prior consent by LUMANTEK.
Trademarks
HD ENCODULATORTM, SD ENCODULATORTM, LUMANTEK Logo, Mega CruiserTM, ORIXTM,
X-CruiserTM, DTA-PlusTM, Media BlasterTM, are Trademarks of Lumantek. Co., Ltd.
Any other trademarks than stated above in this document belongs to its pertinent
corporation.
Warranty Period
Lumantek's products comes with One (1) year limited warranty. Please contact below if you
need more information.
LUMANTEK CUSTOMER SERVICES
gs@lumantek.com
TEL : +82 - (0)2-6947-7400
FAX: +82 - (0)2-6947-7440
Installation Precautions
This page states the safety measures the users must take to avoid circumstances where the system may
occur physical damages or injuries. Please THOROUGHLY go over this page before the system installa-
tion/operation.
General Precautions
Maintain dust FREE condition during and after System Installation/Operation.
Please place the system cover in a safe location when opened.
Securely stow tools and cables away from the passages.
Avoid wearing loosened clothes or accessories during installation/Operation.
Avoid any unnecessary actions that may damage/harm system or personnel.
Do NOT open the system unless advised by Lumantek representative.
Lumantek takes no responsibility on units with broken RMA seals.
Power Precautions
Please check cable overload before connecting the system to the power supply.
Avoid wearing metal accessories (Rings, Earrings) connecting system to the power source.
Avoid operating on wet floors. Make sure power extension cables, floors, and instruments are
grounded and in a safe operating condition.
Please discharge static electricity by touching grounding metals before starting hardware installation.
The grounding parts must be disassembled last.
Manufacture takes no responsibilities on Direct/Indirect losses or damages
due to use of inappropriate parts or services by unauthorized service provider
Supplying power during the system installation may cause damages to the system and personnel.
AC Power Precautions
This unit utilizes AC power, the cord comes with a grounding function.
Please connect the system to the power socket with groundings.
Use Green/Yellow 0.75mm2 (18AWG) or higher grade grounding cables.
Do NOT block power sockets with tools or boxes. Please keep it clear at all times.
03

Produktspecifikationer

Varumärke: Lumantek
Kategori: mottagare
Modell: ez-Distributor

Behöver du hjälp?

Om du behöver hjälp med Lumantek ez-Distributor ställ en fråga nedan och andra användare kommer att svara dig




mottagare Lumantek Manualer

mottagare Manualer

Nyaste mottagare Manualer