Luxman EQ-500 Bruksanvisning

Luxman mottagare EQ-500

Läs nedan 📖 manual på svenska för Luxman EQ-500 (16 sidor) i kategorin mottagare. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
Owne sr`
Manual
VACUUM TUBE PHONO AMPLIFIER
EQ-500
Contents
Precautions 1 ·············································································································
Features of This Unit 2 ································································································
Names and Functions 4 ······························································································
Connections 8 ············································································································
Block Diagram 10 ·······································································································
Specifications 11 ········································································································
Before Asking for Repair Services 12 ··········································································
1
VACUUM TUBE PHONO AMPLIFIER EQ-500
Precautions
Installation place
Install this unit in a location where good ventilation and heat
radiation are assured.
Especially, the installation of this unit where the direct sunlight
is present, where the temperature rises excessively high such
as close to a heater, or where it is humid or dusty may cause
a malfunction even if heat is efficiently released. Therefore, do
not install this unit in such places.
Note:
For heat dispersal, do not install this equipment in a confined
space such as a book case or similar unit.
* Note
Wall
*
*
*
Cautions in connecting cartridges
Connect an analog player or a tone arm with the ground ter-
minal of this unit.
If the grounding terminal is inadequately connected, noises
including hum may be generated, resulting in an adverse S/N
ratio.
The pin plugs to be inserted in the input terminals of this unit
shall be pushed in firmly. If the grounding of the terminal is
inadequately connected, noises including hum may be gener-
ated, resulting in an adverse effect on the S/N ratio.
Precautions in connecting with other
components
When connecting this unit to input/output devices, be sure to
turn off the power switch of this unit and all other connected
units.
The pin-plugs to be inserted in the input and output terminals
of this unit shall be pushed in firmly. If the grounding termi-
nal is inadequately connected, noises including hum may be
generated, resulting in an adverse effect on the S/N ratio.
The sound is not generated shortly after
the power supply is turned on
This amplifier is equipped with a time muting circuit in order to
separate the output circuit. Therefore, no sound is generated
shortly after the power supply is turned on.
If the volume control is set to a high sound level before the
time muting circuit is canceled, a large sound will suddenly be
generated. Please be advised that the volume control shall be
set to a low level at first and adjusted after the sound comes
out of the speakers.
Repair and adjustment
When repairs and adjustments are needed, please consult
with the dealer you bought the unit from.
Cleaning
For cleaning, use a piece of soft cloth to wipe the unit such as
cleaning cloth. When the dirt is hard to remove, use a small
amount of neutral detergent to wipe, and then wipe the unit
with dry cloth. Do not use a solvent like benzine or thinner
because such a substance can often damage the exterior.

Produktspecifikationer

Varumärke: Luxman
Kategori: mottagare
Modell: EQ-500

Behöver du hjälp?

Om du behöver hjälp med Luxman EQ-500 ställ en fråga nedan och andra användare kommer att svara dig




mottagare Luxman Manualer

mottagare Manualer

Nyaste mottagare Manualer