Majestic SCCMPPT40 Bruksanvisning

Majestic Inte kategoriserad SCCMPPT40

Läs nedan 📖 manual på svenska för Majestic SCCMPPT40 (34 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 14 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/34

MPPT Series

Maximum Power Point Tracking

SCCMPPT20 SCCMPPT30 SCCMPPT2440— —

Solar Charge and Discharge Controller User Manual

Model

SCCMPPT 20

SCCMPPT 30

SCCMPPT 40

Battery voltage

12V/ 24V

Max. solar panel voltage

100V (25°C), 90V (-25°C)

Charging current

20A

30A

40A

Discharging current

20A

Dear users,

Thank you for choosing our product!

Safety Instructions

1. As this controller deals with voltages that exceed the top limit for human safety, do not

operate it before reading this manual carefully and completing safety operation training.

2. The controller has no internal components that need maintenance or service, thus do

not attempt to disassemble or repair the controller.

3. Install the controller indoors, and avoid component exposure and water intrusion.

4. During operation, the heatsink may reach a very high temperature, therefore install the

controller at a place with good ventilation conditions.

5. It's recommended that a fuse or circuit breaker be installed outside the controller.

6. Before installing and wiring the controller, make sure to disconnect the photovoltaic

array and the fuse or breaker close to the battery terminals.

7. After installation, check if all connections are solid and reliable so as to avoid loose

connections that may give rise to dangers caused by heat accumulation.

Warning: means the operation in question is dangerous, and you

should get properly prepared before proceeding.

Note: means the operation in question may cause damage.

Tips: means advice or instruction for the operator.

Table of Contents

1. Product Introduction ................................................................................................................ 4

1.1 Product Overview ............................................................................................................ 4

1.2 Product Features .............................................................................................................. 4

1.3 Exterior and Interfaces ..................................................................................................... 6

1.4 Introduction to Maximum Power Point Tracking Technology ........................................ 7

1.5 Charging Stages Introduction ........................................................................................ 10

2. Product Installation ................................................................................................................ 13

2.1 Installation Precautions .................................................................................................. 13

2.2 Wiring Specications ..................................................................................................... 14

2.3 Installation and Wiring .................................................................................................. 15

3. Product Operation and Display .............................................................................................. 19

3.1 LED Indicators ............................................................................................................... 19

3.2 Key Operations .............................................................................................................. 21

3.3 LCD Startup and Main Interface ................................................................................... 22

3.4 Load Mode Setting Interface ......................................................................................... 23

3.5 System Parameter Settings ............................................................................................ 24

4. Product Protection Function and System Maintenance ......................................................... 26

4.1 Protection Functions ...................................................................................................... 26

4.2 System Maintenance ...................................................................................................... 27

4.3 Abnormality Display and Warnings ............................................................................... 28

5. Product Specication Parameters .......................................................................................... 29

5.1 Electric Parameters ........................................................................................................ 29

5.2 Battery Type Default Parameters (parameters set in monitor software) ....................... 30

Produktspecifikationer

Varumärke:	Majestic
Kategori:	Inte kategoriserad
Modell:	SCCMPPT40

Behöver du hjälp?

Om du behöver hjälp med Majestic SCCMPPT40 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad Majestic Manualer

Majestic TT 53 Bruksanvisning

26 September 2024

Majestic SCCMPPT40 Bruksanvisning

18 September 2024

Majestic SCCMPPT20 Bruksanvisning

18 September 2024

Majestic ARM2502B Bruksanvisning

17 September 2024

Majestic AD200 Bruksanvisning

17 September 2024

Majestic BKT100 Bruksanvisning

17 September 2024

Majestic ARM2601 Bruksanvisning

17 September 2024

Majestic ARM102 Bruksanvisning

17 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

IFM SF3210 Bruksanvisning

1 April 2025

Voltcraft FIT-100 Bruksanvisning

1 April 2025

Makita AC320H Bruksanvisning

1 April 2025

Samsung RS6JA8810B1 Bruksanvisning

1 April 2025

IFM MK5312 Bruksanvisning

1 April 2025

Bartscher 700-4T 1800 Bruksanvisning

1 April 2025

IFM RU6045 Bruksanvisning

1 April 2025

Crestron CAEN-1X1 Bruksanvisning

1 April 2025

Crestron CAEN-4X2 Bruksanvisning

1 April 2025

Hamlet HXD25TCU31 Bruksanvisning

1 April 2025