Makita CE002G Bruksanvisning

Makita Slipmaskin CE002G

Läs nedan 📖 manual på svenska för Makita CE002G (28 sidor) i kategorin Slipmaskin. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/28
INSTRUCTION MANUAL
Cordless Power Cutter
CE002G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: CE002G
Wheel diameter 350 - 355 mm
Max. wheel thickness 4.0 mm
Max. cutting depth 127 mm
Rated speed 4,200 min-1
Rated voltage D.C. 72 V - 80 V max
Recommended air volume of the vacuum cleaner Equal to or more than 1.8 m
3/min
Overall length 825 mm
Net weight 13.1 - 15.1 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydi󰀨erfromcountrytocountry.
• Theweightmaydi󰀨erdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL4040 / BL4050F* / BL4080F*
*:Recommendedbattery
Charger DC40RA / DC40RB / DC40RC
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Symbols
Thefollowingsshowthesymbolswhichmaybeused
fortheequipment.Besurethatyouunderstandtheir
meaning before use.
Read instruction manual.
Wearsafetyglasses.
Donotuseabrasivecut-o󰀨wheel.
Onlydiamondwheelisapplicable.
Do not cut metal.
Do not feed water.
Ni-MH
Li-ion
OnlyforEUcountries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
andbatteriesmayhaveanegativeimpact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulatorsshouldbestoredseparately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
Thisisindicatedbythesymbolofthe
crossed-out wheeled bin placed on the
equipment.
Intended use
Thetoolisintendedforcuttinginmasonrymaterials
with a diamond wheel.
3 ENGLISH
Noise
ThetypicalA-weightednoiseleveldeterminedaccordingtoEN60745-2-22:
Soundpressurelevel(L
pA):106dB(A)
Soundpowerlevel(L
WA):117dB(A)
Uncertainty(K):3dB(A)
NOTE:Thedeclarednoiseemissionvalue(s)hasbeenmeasuredinaccordancewithastandardtestmethodand
maybeusedforcomparingonetoolwithanother.
NOTE:Thedeclarednoiseemissionvalue(s)mayalsobeusedinapreliminaryassessmentofexposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can di󰀨er from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o󰀨 and when it is running idle in addition to the trigger time).
Vibration
Work mode: concrete cutting
Left hand Right hand Applicable standard
ah,W (m/s2) Uncertainty K (m/s2) ah,W (m/s2) Uncertainty K (m/s2)
2.5 1.5 2.5 1.5 EN60745-2-22
NOTE:Thedeclaredvibrationtotalvalue(s)hasbeenmeasuredinaccordancewithastandardtestmethodand
maybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalsobeusedinapreliminaryassessmentofexposure.
WARNING: The vibration emission during actual use of the power tool can di󰀨er from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o󰀨 and when it is running idle in addition to the trigger time).
Declarations of Conformity
For European countries only
TheDeclarationsofconformityareincludedinAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING Read all safety warnings, instruc-
tions, illustrations and specications provided with
this power tool. Failure to follow all instructions listed
belowmayresultinelectricshock,reand/orserious
injury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated(corded)powertoolorbattery-operated
(cordless)powertool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
whichmayignitethedustorfumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
youtolosecontrol.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tricshockifyourbodyisearthedorgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.

Produktspecifikationer

Varumärke: Makita
Kategori: Slipmaskin
Modell: CE002G

Behöver du hjälp?

Om du behöver hjälp med Makita CE002G ställ en fråga nedan och andra användare kommer att svara dig


Slipmaskin Makita Manualer

Makita

Makita 9562CVR Bruksanvisning

8 Januari 2025
Makita

Makita 9558PB Bruksanvisning

23 December 2024
Makita

Makita GA9060R Bruksanvisning

14 Oktober 2024
Makita

Makita DGA700Z Bruksanvisning

13 Oktober 2024
Makita

Makita GA022GD202 Bruksanvisning

2 Oktober 2024
Makita

Makita GA7063RX02 Bruksanvisning

2 Oktober 2024
Makita

Makita GA013GD101 Bruksanvisning

2 Oktober 2024
Makita

Makita 9563 Bruksanvisning

30 September 2024
Makita

Makita DGA513Z Bruksanvisning

28 September 2024
Makita

Makita GA7062 Bruksanvisning

24 September 2024

Slipmaskin Manualer

Nyaste Slipmaskin Manualer

Bosch

Bosch GWS 18V-8 Professional Bruksanvisning

6 Januari 2025
DeWalt

DeWalt DCG415B Bruksanvisning

4 Januari 2025
Einhell

Einhell TC-AG 18/115 Li Bruksanvisning

1 Januari 2025
DeWalt

DeWalt DWE4115 Bruksanvisning

31 December 2025
Black Decker

Black Decker 4292 Bruksanvisning

31 December 2025
Powerplus

Powerplus POWX06250 Bruksanvisning

31 December 2025
Hazet

Hazet 9032M-36 Bruksanvisning

31 December 2025
Alpha Tools

Alpha Tools WS 230-3 Bruksanvisning

29 December 2024
Einhell

Einhell WS 230-4 Bruksanvisning

29 December 2024
Rikon

Rikon 80-800VS Bruksanvisning

28 December 2024