Makita DCO180Z Bruksanvisning

Makita Skärmaskin DCO180Z

Läs nedan 📖 manual på svenska för Makita DCO180Z (12 sidor) i kategorin Skärmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Cut-Out Tool

DCO140

DCO180

014848

ENGLISH (Original instructions)

SPECIFICATIONS

Model DCO140 DCO180

Collet chuck capacity 3 mm, 6 mm or 1/8", 1/4" 3 mm, 6 mm or 1/8", 1/4"

Rated speed (n)/ No load speed (n

0) 30,000 min-1 30,000 min-1

Overall length 313 mm 313 mm

Net weight 1.6 kg 1.7 kg

Rated voltage D.C. 14.4 V D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of the European

Directives, on Waste Electric and

Electronic Equipment and Batteries and

Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws,

electric equipment and batteries and

battery pack(s) that have reached the

end of their life must be collected

separately and returned to an

environmentally compatible recycling

facility.

ENE012-1

Intended use

The tool is intended for cutting gypsum, wood, plastic

and soft wall tiles.

ENG905-1

Noise

The typical A-weighted noise level determined

according to EN60745:

Sound pressure level (L

pA) : 77 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : rotation without load

Vibration emission (ah) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-17

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cordless Cut-Out Tool

Model No./ Type: DCO140, DCO180

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

Standard or standardized documents:

EN60745

The Technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

Ni-MH

Li-ion

27.9.2013

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use

of a cord suitable for outdoor use reduces the risk

of electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal safety

10. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

12. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your finger on the switch or energising power

tools that have the switch on invites accidents.

13. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

14. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

15. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving

parts.

16. If devices are provided for the connection of

dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-

related hazards.

Power tool use and care

17. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

18. Do not use the power tool if the switch does

not turn it on and off. Any power tool that

cannot be controlled with the switch is dangerous

and must be repaired.

19. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

Produktspecifikationer

Varumärke:	Makita
Kategori:	Skärmaskin
Modell:	DCO180Z
Färg på produkten:	Zwart
Vikt:	200 g
Bredd:	55 mm
Djup:	140 mm
Höjd:	16 mm
Sladdlängd:	0.35 m
Förpackningens bredd:	180 mm
Djuppackning:	125 mm
Förpackningshöjd:	35 mm
Användarmanual:	Ja
Husmaterial:	Kunststof
Anslutningsteknik:	Bedraad
Ethernet LAN:	Ja
Typ av strömkälla:	USB
Medföljande kablar:	USB Type-C
Integrerad minneskortläsare:	Nee
Snabbstartsguide:	Ja
Antal USB 2.0-portar:	1
VGA (D-Sub) port(ar):	1
Antal HDMI-portar:	1
Mikrofon, linjeingång:	Nee
Antal Ethernet LAN (RJ-45)-portar:	1
Strömförbrukning (max):	60 W
Certifiering:	RoHS
HD typ:	4K Ultra HD
Upplösning (maximal digital):	3840 x 2160 Pixels
Plug and play:	Ja
Antal per paket:	1 stuk(s)
Inspänning:	5 - 20 V
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Stöder Windows:	Ja
Förvaringstemperatur:	-20 - 60 °C
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ A:	1
Stöder Mac-operativsystem:	Ja
Antal portar USB 3.2 Gen 1 (3.1 Gen 1) Typ C:	1
Spännande:	5 V
Ethernet-gränssnittstyp:	Gigabit Ethernet
Värdgränssnitt:	USB 3.2 Gen 2 (3.1 Gen 2) Type-A
Antal portar USB 3.2 Gen 2 (3.1 Gen 2) Typ A:	1
Andra stödsystem:	Android
Kompatibilitet:	UH3230, UH3232, UH3235, UC3008, UH3234, UH3237
Nettovikt kartong:	1880 g
Nätkontakt:	USB Type-C
Antal skärmar som stöds:	2
Förbättrad kabelhantering:	Ja
(Ytter) huvudpaketets höjd:	231 mm
(Ytter) huvudförpackningens bredd:	259 mm
(Ytter) huvudförpackningens bruttovikt:	4640 g
(Ytre) huvudpaketets längd:	368 mm
Överföringshastighet:	1500 Mbit/s
Strömförbrukning (typiskt):	12.5 W
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	0 - 80 procent
Harmoniserad systemkod (HS):	84733020
Antal portar:	6
Hub-gränssnitt:	HDMI, RJ-45, USB 2.0, VGA
Maximal upplösning (HDMI):	3840 x 2160 Pixels