Makita DFL125FZ Bruksanvisning
Makita
Skruvmaskin
DFL125FZ
Läs nedan 📖 manual på svenska för Makita DFL125FZ (12 sidor) i kategorin Skruvmaskin. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
INSTRUCTION MANUAL
Cordless Angle Screwdriver
DFL083F
DFL125F
DFL204F
DFL302F
DFL403F
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DFL083F DFL125F DFL204F DFL302F DFL403F
Fastening torque Hard joint 2 - 8 N•m 5 - 12 N•m 8 - 20 N•m
16 - 30 N•m 25 - 40 N•m
Soft joint 2 - 8 N•m 5 - 12 N•m 8 - 20 N•m
16 - 30 N•m 25 - 40 N•m
Square drive 9.5 mm
No load speed *1 150 - 700
min-1
100 - 700
min-1
100 - 440
min-1
70 - 230
min-1
50 - 220
min-1
Rated voltage D.C. 14.4 V
Overall length
(Depending on the battery)
464 - 481 mm 503 - 520 mm
Net weight 1.7 - 2.1 kg 2.0 - 2.3 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydifferfromcountrytocountry.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
• *1 No load speed is adjustable with exclusive application.
Applicable battery cartridge and charger
Battery cartridge BL1415N / BL1415NA / BL1430 / BL1430B / BL1440 / BL1450 /
BL1460A / BL1460B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841:
Model DFL083F
Sound pressure level (L
pA) : 70 dB(A) or less
Uncertainty (K) : 3 dB(A)
Model DFL125F
Sound pressure level (L
pA) : 70 dB(A) or less
Uncertainty (K) : 3 dB(A)
Model DFL204F
Sound pressure level (L
pA) : 70 dB(A) or less
Uncertainty (K) : 3 dB(A)
Model DFL302F
Sound pressure level (L
pA) : 70 dB(A) or less
Uncertainty (K) : 3dB(A)
Model DFL403F
Sound pressure level (L
pA) : 70 dB(A) or less
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841:
Model DFL083F
Work mode: screwdriving without impact
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
3 ENGLISH
Model DFL125F
Work mode: screwdriving without impact
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
Model DFL204F
Work mode: screwdriving without impact
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
Model DFL302F
Work mode: screwdriving without impact
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
Model DFL403F
Work mode: screwdriving without impact
Vibration emission (a
h) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
NOTE:
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
NOTE:
The declared vibration emission value may
also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specications provided with this
power tool. Failure to follow all instructions listed below
mayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Skruvmaskin |
| Modell: | DFL125FZ |
Behöver du hjälp?
Om du behöver hjälp med Makita DFL125FZ ställ en fråga nedan och andra användare kommer att svara dig
Skruvmaskin Makita Manualer
12 Oktober 2024
5 Oktober 2024
4 Oktober 2024
4 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
27 September 2024
24 September 2024
24 September 2024
Skruvmaskin Manualer
- Skruvmaskin Bosch
- Skruvmaskin AEG
- Skruvmaskin DeWalt
- Skruvmaskin Silverline
- Skruvmaskin Ferm
- Skruvmaskin Ozito
- Skruvmaskin Gude
- Skruvmaskin Black And Decker
- Skruvmaskin Vonroc
- Skruvmaskin Stanley
- Skruvmaskin Skil
- Skruvmaskin Yato
- Skruvmaskin Hilti
- Skruvmaskin Ryobi
- Skruvmaskin Festool
- Skruvmaskin Metabo
- Skruvmaskin Parkside
- Skruvmaskin Worx
- Skruvmaskin Meec Tools
- Skruvmaskin Milwaukee
- Skruvmaskin Hikoki
- Skruvmaskin Tacklife
- Skruvmaskin Hazet
- Skruvmaskin Einhell
- Skruvmaskin Maktec
- Skruvmaskin Steren
- Skruvmaskin Craftsman
- Skruvmaskin Power Craft
- Skruvmaskin Powerplus
- Skruvmaskin Porter-Cable
- Skruvmaskin Cotech
- Skruvmaskin Beta
- Skruvmaskin Kraftwerk
- Skruvmaskin Powerfix
- Skruvmaskin Matrix
- Skruvmaskin Kress
- Skruvmaskin Fieldmann
- Skruvmaskin Basetech
- Skruvmaskin Laserliner
- Skruvmaskin Truper
- Skruvmaskin Cocraft
- Skruvmaskin Meister Craft
- Skruvmaskin Toolcraft
- Skruvmaskin Batavia
- Skruvmaskin Fein
- Skruvmaskin Park Tool
- Skruvmaskin Elu
- Skruvmaskin Goon
- Skruvmaskin Sthor
- Skruvmaskin Wiha
- Skruvmaskin Alpha Tools
- Skruvmaskin SW-Stahl
- Skruvmaskin Cleco
- Skruvmaskin MSW
- Skruvmaskin Weidmüller
- Skruvmaskin Einhell Bavaria
- Skruvmaskin Wera
- Skruvmaskin Rodcraft
- Skruvmaskin Ingersoll Rand
- Skruvmaskin Bavaria By Einhell
- Skruvmaskin Chicago Pneumatic
- Skruvmaskin Facom
- Skruvmaskin TAURUS Titanium
Nyaste Skruvmaskin Manualer
27 Oktober 2024
24 Oktober 2024
20 Oktober 2024
18 Oktober 2024
17 Oktober 2024
15 Oktober 2024
10 Oktober 2024
7 Oktober 2024
5 Oktober 2024
5 Oktober 2024