Makita DTW300Z Bruksanvisning

Makita Skruvmaskin DTW300Z

Läs nedan 📖 manual på svenska för Makita DTW300Z (16 sidor) i kategorin Skruvmaskin. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/16
INSTRUCTION MANUAL
Cordless Impact Wrench
DTW300
DTW301
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DTW300 DTW301
Fastening capacities Standard bolt M10 - M20
High tensile bolt M10 - M16
Square drive 12.7 mm
No load speed (RPM) Max impact mode 0 - 3,200 min
-1
Hard impact mode 0 - 2,600 min
-1
Medium impact mode 0 - 1,800 min
-1
Soft impact mode 0 - 1,000 min
-1
Impacts per minute Max impact mode 0 - 4,000 min
-1
Hard impact mode 0 - 3,400 min
-1
Medium impact mode 0 - 2,600 min
-1
Soft impact mode 0 - 1,800 min
-1
Overall length 144 mm
Rated voltage D.C. 18 V
Net weight 1.5 - 1.8 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Symbols
Thefollowingsshowthesymbolsusedfortheequip-
ment.Besurethatyouunderstandtheirmeaningbefore
use.
Read instruction manual.
Ni-MH
Li-ion
OnlyforEUcountries
Do not dispose of electric equipment or
batterypacktogetherwithhouseholdwaste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteriesandbatterypack(s)thathave
reached the end of their life must be col-
lectedseparatelyandreturnedtoanenvi-
ronmentallycompatiblerecyclingfacility.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841-2-2:
Model DTW300
Sound pressure level (L
pA) : 97 dB(A)
Sound power level (L
WA) : 108 dB (A)
Uncertainty(K):3dB(A)
Model DTW301
Sound pressure level (L
pA) : 97 dB(A)
Sound power level (L
WA) : 108 dB (A)
Uncertainty(K):3dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
methodandmaybeusedforcomparingonetoolwith
another.
NOTE: The declared noise emission value(s)
mayalsobeusedinapreliminaryassessmentof
exposure.
3 ENGLISH
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-2:
Model DTW300
Work mode: impact tightening of fasteners of the maxi-
mumcapacityofthetool
Vibration emission (a
h) : 12.5 m/s2
Uncertainty(K):1.5m/s
2
Model DTW301
Work mode: impact tightening of fasteners of the maxi-
mumcapacityofthetool
Vibration emission (a
h) : 12.5 m/s2
Uncertainty(K):1.5m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalso
beusedinapreliminaryassessmentofexposure.
WARNING: The vibration emission during
actual use of the power tool can dier from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specications provided with this
power tool. Failure to follow all instructions listed below
mayresultinelectricshock,reand/orseriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated(corded)powertoolorbattery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
whichmayignitethedustorfumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
youtolosecontrol.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tricshockifyourbodyisearthedorgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7.
Power tools can produce electromagnetic elds
(EMF) that are not harmful to the user. However,
users of pacemakers and other similar medical
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.

Produktspecifikationer

Varumärke: Makita
Kategori: Skruvmaskin
Modell: DTW300Z

Behöver du hjälp?

Om du behöver hjälp med Makita DTW300Z ställ en fråga nedan och andra användare kommer att svara dig


Skruvmaskin Makita Manualer

Makita

Makita DHP448 Bruksanvisning

12 Oktober 2024
Makita

Makita 6906J Bruksanvisning

5 Oktober 2024
Makita

Makita DTW300Z Bruksanvisning

4 Oktober 2024
Makita

Makita DA3000V Bruksanvisning

4 Oktober 2024
Makita

Makita 6952 Bruksanvisning

2 Oktober 2024
Makita

Makita DTW180RTJ Bruksanvisning

2 Oktober 2024
Makita

Makita DTWA190Z Bruksanvisning

2 Oktober 2024
Makita

Makita TD090D Bruksanvisning

27 September 2024
Makita

Makita BDF445RHE Bruksanvisning

24 September 2024
Makita

Makita TW001GD202 Bruksanvisning

24 September 2024

Skruvmaskin Manualer

Nyaste Skruvmaskin Manualer

Ryobi

Ryobi One+ R18IW3 Bruksanvisning

27 Oktober 2024
Bosch

Bosch GSB 12-2 Professional Bruksanvisning

24 Oktober 2024
MSW

MSW -ACW700 Bruksanvisning

20 Oktober 2024
Einhell

Einhell CC-IW 450 Bruksanvisning

18 Oktober 2024
Metabo

Metabo SSW 650 Bruksanvisning

17 Oktober 2024
Metabo

Metabo SSW 18 LT Bruksanvisning

15 Oktober 2024
Black And Decker

Black And Decker HP9012 Bruksanvisning

10 Oktober 2024
Milwaukee

Milwaukee 2769-20 Bruksanvisning

7 Oktober 2024
Bosch

Bosch GSB 18V-65 Professional Bruksanvisning

5 Oktober 2024
DeWalt

DeWalt DW132 Bruksanvisning

5 Oktober 2024