Makita DFN350ZJ Bruksanvisning

Makita Häftapparat DFN350ZJ

Läs nedan 📖 manual på svenska för Makita DFN350ZJ (12 sidor) i kategorin Häftapparat. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

INSTRUCTION MANUAL

Cordless Brad Nailer

DFN350

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DFN350

Nail size 18Ga x 15, 20, 25, 30, 35 mm

Nail magazine capacity 100 pcs.

Dimensions with BL1860B, without hook (L x W x H) 257 mm x 79 mm x 228 mm

Rated voltage D.C. 18 V

Net weight 2.1 - 2.4 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsandbatterycartridgemaydifferfromcountrytocountry.

• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combinations, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge

BL1815 / BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B

• Some of the battery cartridges listed above may not be available depending on your region of residence.

WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause

injuryand/orre.

Symbols

The followings show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or

battery pack together with household waste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for fastening soft wood.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745-2-16:

Sound pressure level (LpA ) : 81 dB(A)

Sound power level (LWA) : 92 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

method and may be used for comparing one tool with

another.

NOTE: The declared noise emission value(s)

may also be used in a preliminary assessment of

exposure.

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can differ from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value determined according to

EN60745-2-16:

Vibration emission (a

h) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

and may be used for comparing one tool with another.

NOTE: The declared vibration total value(s) may also

be used in a preliminary assessment of exposure.

WARNING: The vibration emission during

actual use of the power tool can differ from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

3 ENGLISH

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any adapter plugs

with earthed (grounded) power tools. Unmodiedplugs

and matching outlets will reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an exten-

sion cord suitable for outdoor use. Use of a cord suit-

able for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

7. Power tools can produce electromagnetic

elds (EMF) that are not harmful to the user.

However, users of pacemakers and other similar

medical devices should contact the maker of their

device and/or doctor for advice before operating

this power tool.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts.Looseclothes,jewelleryor

long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

8. Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action

cancausesevereinjurywithinafractionofa

second.

9. Always wear protective goggles to protect

your eyes from injury when using power tools.

The goggles must comply with ANSI Z87.1 in

the USA, EN 166 in Europe, or AS/NZS 1336

in Australia/New Zealand. In Australia/New

Zealand, it is legally required to wear a face

shield to protect your face, too.

It is an employer's responsibility to enforce

the use of appropriate safety protective equip-

ments by the tool operators and by other per-

sons in the immediate working area.

Produktspecifikationer

Varumärke:	Makita
Kategori:	Häftapparat
Modell:	DFN350ZJ
Färg på produkten:	Zwart
Vikt:	368 g
Bredd:	110 mm
Djup:	110 mm
Höjd:	124 mm
Snäll:	IP-beveiligingscamera
Mobila operativsystem som stöds:	Android, BlackBerry OS, Windows Phone 8, iOS
Minneskortets maximala kapacitet:	32 GB
Videoformat som stöds:	H.264
Placeringsstöd:	Binnen
Anslutningsteknik:	Bedraad
Ethernet LAN:	Ja
Monteringsmetod:	Bureau
Videolägen som stöds:	720p
Maximal upplösning:	1280 x 720 Pixels
Totalt antal megapixlar:	1 MP
Videokomprimeringsformat:	H.264
Typ av strömkälla:	Power over Ethernet (PoE)
Strömutgång (volt):	5
Strömutgång (ampere):	1.5 A
Minimal belysning:	0.05 Lux
Synfältsvinkel (FOV).:	45 °
Antal kameror:	1
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	SDHC
Nattseende:	Ja
LED-typ:	IR
Infraröd våglängd:	850 nm
Fast brännvidd:	2 mm
Zoomkapacitet:	Ja
Antal Ethernet LAN (RJ-45)-portar:	1
Inbyggda högtalare:	Ja
Strömförbrukning (max):	8 W
Optisk sensorstorlek:	1/3 "
Bildsensortyp:	CMOS
Gränssnitt:	RJ-45
Inbyggd mikrofon:	Ja
Videoupplösningar:	320 x 176,1280 x 720 Pixels
Password bescherming:	Gebruiker
Grafikupplösningar som stöds:	1280 x 720 (HD 720)
Kabelteknik:	10/100Base-T(X)
Nätverksstandard:	IEEE 802.3af
Stöder Windows:	Ja
Max 30 bilder per sekund:	25 fps
Stöder Mac-operativsystem:	Ja
Stöder Linux:	Ja
Ethernet-gränssnittstyp:	Fast Ethernet
Power over Ethernet (PoE):	Ja
PTZ-kontroll:	Ja
Panoreringsintervall:	0 - 350 °
Dag/nattläge:	Ja
Rörelsesensor:	Ja
Night vision scope:	12 m
Antal LED-belysning:	10
Infrarött (IR) termineringsfilter:	Ja
Larmingång/utgång:	Ja
AC-ingångsspänning:	110-230 V
Drifttemperatur (TT):	-5 - 55 °C
Tiltvinkelområde:	0 - 100 °
Mask privat zon:	Ja
Linsdiameter:	8 mm
Typ av varningsmeddelande:	E-mail