Makita DGA901ZUX2 Bruksanvisning
Makita
Slipmaskin
DGA901ZUX2
Läs nedan 📖 manual på svenska för Makita DGA901ZUX2 (24 sidor) i kategorin Slipmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/24
INSTRUCTION MANUAL
Cordless Angle Grinder
DGA701
DGA901
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DGA701 DGA901
Wheel diameter 180 mm 230 mm
Max. wheel thickness 7.2 mm 6.5 mm
Spindle thread M14 or M16 or 5/8″ (country specic)
Rated speed (n) 7,800 min-1 6,000 min-1
Overall length 499 mm
Rated voltage D.C. 36 V
Net weight 5.0 - 6.0 kg 5.2 - 8.0 kg
•
Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 / BL1840B / BL1850 / BL1850B / BL1860B
• Some of the battery cartridges listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges listed above. Use of any other battery cartridges may cause
injury and/or re.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Wear safety glasses.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or battery
pack together with household waste material!
In observance of the European Directives,
on Waste Electric and Electronic Equipment
and Batteries and Accumulators and Waste
Batteries and Accumulators and their imple-
mentation in accordance with national laws,
electric equipment and batteries and battery
pack(s) that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-3:
Model DGA701
Sound pressure level (L
pA) : 88 dB(A)
Sound power level (L
WA) : 99 dB (A)
Uncertainty (K) : 3 dB(A)
Model DGA901
Sound pressure level (L
pA) : 88 dB(A)
Sound power level (L
WA) : 99 dB (A)
Uncertainty (K) : 3 dB(A)
WARNING: Wear ear protection.
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745-2-3:
Model DGA701
Work mode: surface grinding with normal side grip
Vibration emission (a
h, AG) : 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
h, AG) : 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with normal side grip
Vibration emission (a
h, DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with anti vibration side grip
Vibration emission (a
h, DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Model DGA901
Work mode: surface grinding with normal side grip
Vibration emission (a
h, AG) : 7.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: surface grinding with anti vibration side grip
Vibration emission (a
h, AG) : 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with normal side grip
Vibration emission (a
h, DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding with anti vibration side grip
Vibration emission (a
h, DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value
may also be used in a preliminary assessment of
exposure.
3 ENGLISH
WARNING: The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
WARNING: The declared vibration emission
value is used for main applications of the power tool.
However if the power tool is used for other applica-
tions, the vibration emission value may be different.
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
power tools may result in serious personal injury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your nger on the switch or energising power tools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
8. Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action
can cause severe injury within a fraction of a
second.
9. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Slipmaskin |
| Modell: | DGA901ZUX2 |
Behöver du hjälp?
Om du behöver hjälp med Makita DGA901ZUX2 ställ en fråga nedan och andra användare kommer att svara dig
Slipmaskin Makita Manualer
8 Januari 2025
23 December 2024
14 Oktober 2024
13 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
30 September 2024
28 September 2024
24 September 2024
Slipmaskin Manualer
- Slipmaskin Bosch
- Slipmaskin AEG
- Slipmaskin DeWalt
- Slipmaskin Adler
- Slipmaskin Aquapur
- Slipmaskin Silverline
- Slipmaskin Toolland
- Slipmaskin Ferm
- Slipmaskin Ozito
- Slipmaskin Gude
- Slipmaskin Gorenje
- Slipmaskin Silvercrest
- Slipmaskin Tryton
- Slipmaskin Hitachi
- Slipmaskin Black And Decker
- Slipmaskin Vonroc
- Slipmaskin Maestro
- Slipmaskin Stanley
- Slipmaskin Skil
- Slipmaskin Hyundai
- Slipmaskin Yato
- Slipmaskin Hilti
- Slipmaskin Ryobi
- Slipmaskin Profitec
- Slipmaskin Festool
- Slipmaskin Metabo
- Slipmaskin United Office
- Slipmaskin Parkside
- Slipmaskin Worx
- Slipmaskin Meec Tools
- Slipmaskin Milwaukee
- Slipmaskin Hikoki
- Slipmaskin Mesko
- Slipmaskin Dremel
- Slipmaskin ABB
- Slipmaskin Hazet
- Slipmaskin Einhell
- Slipmaskin Baumr-AG
- Slipmaskin Husqvarna
- Slipmaskin Maktec
- Slipmaskin Steren
- Slipmaskin Bort
- Slipmaskin Tanaka
- Slipmaskin Craftsman
- Slipmaskin Yamato
- Slipmaskin Malmbergs
- Slipmaskin Power Craft
- Slipmaskin Powerplus
- Slipmaskin Porter-Cable
- Slipmaskin Cotech
- Slipmaskin Genesis
- Slipmaskin Bunn
- Slipmaskin Eibenstock
- Slipmaskin Scheppach
- Slipmaskin Gamma
- Slipmaskin Kress
- Slipmaskin Bavaria
- Slipmaskin Dolmar
- Slipmaskin Flex
- Slipmaskin Duro
- Slipmaskin Nuova Simonelli
- Slipmaskin Kawasaki
- Slipmaskin Fieldmann
- Slipmaskin Pattfield
- Slipmaskin Defort
- Slipmaskin Truper
- Slipmaskin Solo
- Slipmaskin Bruder Mannesmann
- Slipmaskin Cocraft
- Slipmaskin Meister Craft
- Slipmaskin Toolcraft
- Slipmaskin RIDGID
- Slipmaskin Batavia
- Slipmaskin Proxxon
- Slipmaskin Westfalia
- Slipmaskin Holzmann
- Slipmaskin Fein
- Slipmaskin Black Decker
- Slipmaskin Stomer
- Slipmaskin Dolmar(Makita)
- Slipmaskin Goon
- Slipmaskin Sthor
- Slipmaskin Ergofix
- Slipmaskin Global
- Slipmaskin Neo
- Slipmaskin Graphite
- Slipmaskin Rikon
- Slipmaskin Duro Pro
- Slipmaskin Victoria Arduino
- Slipmaskin Alpha Tools
- Slipmaskin Felisatti
- Slipmaskin SW-Stahl
- Slipmaskin ATI-ZDL
- Slipmaskin Cleco
- Slipmaskin Gude Pro
- Slipmaskin Einhell Bavaria
- Slipmaskin McKenzie
- Slipmaskin Proviel
- Slipmaskin Gladiator
- Slipmaskin Rodcraft
- Slipmaskin Bavaria By Einhell
- Slipmaskin Chicago Pneumatic
- Slipmaskin Mirka
- Slipmaskin Classic Power
- Slipmaskin Handwerk
Nyaste Slipmaskin Manualer
6 Januari 2025
4 Januari 2025
1 Januari 2025
31 December 2025
31 December 2025
31 December 2025
31 December 2025
29 December 2024
29 December 2024
28 December 2024