Makita DTW700RTJ Bruksanvisning

Makita Skruvmaskin DTW700RTJ

Läs nedan 📖 manual på svenska för Makita DTW700RTJ (16 sidor) i kategorin Skruvmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/16
INSTRUCTION MANUAL
Cordless Impact Wrench
DTW700
DTW701
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DTW700 DTW701
Fastening capacities Standard bolt M10 - M24
High tensile bolt M10 - M16
Square drive 12.7 mm
No load speed Max impact mode (4) 0 - 2,200 min
-1
Hard impact mode (3) 0 - 1,900 min
-1
Medium impact mode (2) 0 - 1,200 min
-1
Soft impact mode (1) 0 - 500 min
-1
Impacts per minute Max impact mode (4) 0 - 2,700 min
-1
Hard impact mode (3) 0 - 2,400 min
-1
Medium impact mode (2) 0 - 1,700 min
-1
Soft impact mode (1) 0 - 1,000 min
-1
Overall length 170 mm
Rated voltage D.C. 18 V
Net weight 2.3 - 2.7 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Symbols
Thefollowingsshowthesymbolswhichmaybeused
fortheequipment.Besurethatyouunderstandtheir
meaning before use.
Read instruction manual.
Ni-MH
Li-ion
OnlyforEUcountries
Do not dispose of electric equipment or
batterypacktogetherwithhouseholdwaste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteriesandbatterypack(s)thathave
reached the end of their life must be col-
lectedseparatelyandreturnedtoanenvi-
ronmentallycompatiblerecyclingfacility.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841-2-1:
Model DTW700
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty(K):3dB(A)
Model DTW701
Sound pressure level (L
pA) : 94 dB(A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty(K):3dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
methodandmaybeusedforcomparingonetoolwith
another.
NOTE: The declared noise emission value(s)
mayalsobeusedinapreliminaryassessmentof
exposure.
3 ENGLISH
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o and when
it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-1:
Model DTW700
Work mode: impact tightening of fasteners of the maxi-
mumcapacityofthetool
Vibration emission (a
h) : 19.0 m/s2
Uncertainty(K):2.0m/s
2
Model DTW701
Work mode: impact tightening of fasteners of the maxi-
mumcapacityofthetool
Vibration emission (a
h) : 19.0 m/s2
Uncertainty(K):2.0m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalso
beusedinapreliminaryassessmentofexposure.
WARNING:
The vibration emission during actual
use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o and when
it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listedbelowmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated(corded)powertoolorbattery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
whichmayignitethedustorfumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
youtolosecontrol.
Electrical safety
1.
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodiedplugsand
matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tricshockifyourbodyisearthedorgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7. Power tools can produce electromagnetic
elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
asadustmask,non-skidsafetyshoes,hardhator
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.Carryingpowertoolswith
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.

Produktspecifikationer

Varumärke: Makita
Kategori: Skruvmaskin
Modell: DTW700RTJ

Behöver du hjälp?

Om du behöver hjälp med Makita DTW700RTJ ställ en fråga nedan och andra användare kommer att svara dig


Skruvmaskin Makita Manualer

Makita

Makita DDF448Y1J Bruksanvisning

23 December 2024
Makita

Makita DDF446RTJ Bruksanvisning

23 December 2024
Makita

Makita DDA350Y1J Bruksanvisning

23 December 2024
Makita

Makita DHP448 Bruksanvisning

12 Oktober 2024
Makita

Makita 6906J Bruksanvisning

5 Oktober 2024
Makita

Makita DTW300Z Bruksanvisning

4 Oktober 2024
Makita

Makita DA3000V Bruksanvisning

4 Oktober 2024
Makita

Makita 6952 Bruksanvisning

2 Oktober 2024
Makita

Makita DTW180RTJ Bruksanvisning

2 Oktober 2024
Makita

Makita DTWA190Z Bruksanvisning

2 Oktober 2024

Skruvmaskin Manualer

Nyaste Skruvmaskin Manualer

Fuxtec

Fuxtec FX-E1IW20 Bruksanvisning

13 Januari 2025
Hazet

Hazet 9012EL-SPC Bruksanvisning

12 Januari 2025
Metabo

Metabo SE 2800 Bruksanvisning

8 Januari 2025
Ryobi

Ryobi PCL250 Bruksanvisning

5 Januari 2025
Ryobi

Ryobi PCL212 Bruksanvisning

5 Januari 2025
Ryobi

Ryobi One+ RSD18 Bruksanvisning

4 Januari 2025
Hazet

Hazet 9212SPC-010 Bruksanvisning

2 Januari 2025
Hazet

Hazet 6004CT-3 Bruksanvisning

2 Januari 2025
Hazet

Hazet 6001-1.5/3 Bruksanvisning

2 Januari 2025
Hazet

Hazet 6001-3.0/3 Bruksanvisning

2 Januari 2025