Makita DTWA140Z Bruksanvisning

Makita Skruvmaskin DTWA140Z

Läs nedan 📖 manual på svenska för Makita DTWA140Z (16 sidor) i kategorin Skruvmaskin. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

INSTRUCTION MANUAL

Cordless Impact Wrench

DTWA070

DTWA100

DTWA140

DTWA190

ENGLISH: Original instructions

IMPORTANT: Read Before Using.

2 ENGLISH

SPECIFICATIONS

Model: DTWA070 DTWA100 DTWA140 DTWA190

Fastening capacities Standard bolt M5 - M12 M6 - M16 M8 - M16

High tensile bolt M5 - M10 M6 - M12 M8- M14

Maximum fastening torque 65 N•m 95 N•m 140 N•m 185 N•m

Torque range Approx.

5 - 40 N•m

Approx.

6 - 65 N•m

Approx.

18 - 80 N•m

Approx.

25 - 125 N•m

Square drive 9.5 mm 12.7 mm

No load speed (RPM) 0 - 2,500 min-1 0 - 2,700 min-1 0 - 2,600 min-1

Impacts per minute 0 - 3,700 min-1 0 - 3,300 min-1 0 - 3,000 min-1

Overall length 144 mm 151 mm 158 mm

Rated voltage D.C. 14.4 V

Net weight 1.1 - 1.4 kg 1.2 - 1.4 kg 1.2 - 1.5 kg 1.3 - 1.6 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1415N / BL1415NA / BL1430 / BL1430B / BL1440 / BL1450 /

BL1460A / BL1460B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Symbols

Thefollowingsshowthesymbolsusedfortheequip-

ment.Besurethatyouunderstandtheirmeaningbefore

use.

Read instruction manual.

Ni-MH

Li-ion

OnlyforEUcountries

Do not dispose of electric equipment or

batterypacktogetherwithhouseholdwaste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteriesandbatterypack(s)thathave

reached the end of their life must be col-

lectedseparatelyandreturnedtoanenvi-

ronmentallycompatiblerecyclingfacility.

Intended use

The tool is intended for fastening bolts and nuts.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-2-2:

Model DTWA070

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty(K):3dB(A)

Model DTWA100

Sound pressure level (L

pA) : 93 dB(A)

Sound power level (L

WA) : 104 dB (A)

Uncertainty(K):3dB(A)

Model DTWA140

Sound pressure level (L

pA) : 96 dB(A)

Sound power level (L

WA) : 107 dB (A)

Uncertainty(K):3dB(A)

Model DTWA190

Sound pressure level (L

pA) : 95 dB(A)

Sound power level (L

WA) : 106 dB (A)

Uncertainty(K):3dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE: The declared noise emission value(s)

mayalsobeusedinapreliminaryassessmentof

exposure.

3 ENGLISH

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can differ from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-2:

Model DTWA070

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 9.0 m/s2

Uncertainty(K):1.5m/s

Model DTWA100

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 8.5 m/s2

Uncertainty(K):1.5m/s

Model DTWA140

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 10.0 m/s2

Uncertainty(K):1.5m/s

Model DTWA190

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 10.5 m/s2

Uncertainty(K):1.5m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalso

beusedinapreliminaryassessmentofexposure.

WARNING: The vibration emission during

actual use of the power tool can differ from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

whichmayignitethedustorfumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

youtolosecontrol.

Electrical safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

Power tools can produce electromagnetic elds

(EMF) that are not harmful to the user. However,

users of pacemakers and other similar medical

devices should contact the maker of their device and/

or doctor for advice before operating this power tool.

Personal safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

Produktspecifikationer

Varumärke:	Makita
Kategori:	Skruvmaskin
Modell:	DTWA140Z
Färg på produkten:	Grijs
Inbyggd display:	Nee
Vikt:	2850 g
Bredd:	178 mm
Djup:	172 mm
Höjd:	219 mm
Sladdlängd:	1.2 m
Förpackningens vikt:	4018 g
Förpackningens bredd:	225 mm
Djuppackning:	360 mm
Förpackningshöjd:	225 mm
Husmaterial:	Stof/Weefsel
LED-indikatorer:	Ja
Batterikapacitet:	4800 mAh
AC-adapterfrekvens:	50 - 60 Hz
Blåtand:	Ja
Bluetooth-version:	4.2
Anslutningsteknik:	Draadloos
Typ av strömkälla:	Batterij/Accu
Ursprungsland:	China
Batteri/Batterispänning:	3.6 V
Genomsnittlig effekt:	50 W
Antal högtalare:	2
Förstärkarens uteffekt:	50 W
Rekommenderad användning:	Mobiele telefoon/smartphone
USB-anslutning:	Ja
Ljudutgångskanaler:	1.0 kanalen
Peak Music Power Output (PMPO):	50 W
Frekvensomfång:	40 - 20000 Hz
AC-adapter, utspänning:	100 - 240 V
Signal-brusförhållande:	80 dB
Enkel anslutning:	Ja
Export Control Classification Number (ECCN):	China
Monteringsfästen ingår:	Nee
Förstärkare:	Ingebouwd
Diameter woofer:	120 mm
Antal basförare:	1
Diameter högtonenhögtalare:	25 mm
Antal diskantdrivrutiner:	1
Fjärrkontroll ingår:	Nee
Produktdesign:	Cylinder
(Ytter) huvudpaketets höjd:	391 mm
(Ytter) huvudförpackningens bredd:	241 mm
(Ytter) huvudförpackningens bruttovikt:	8721 g
(Ytre) huvudpaketets längd:	468 mm
Produkter per pall:	56 stuk(s)
Tweeter:	Ja
Wifi:	Ja
Typ produkt:	Draadloze stereoluidspreker
Batteriteknik:	Lithium-Ion (Li-Ion)
Batterityp:	Ingebouwde accu
Pall bruttolängd:	1200 mm
Produkter per palllager:	14 stuk(s)
Lagen per pallet:	4 stuk(s)
Antal (yttre) huvudpaket per pall:	28 stuk(s)
GTIN (EAN/UPC) nummer (yttre) huvudförpackning:	6925281974922
(Ytter) huvudförpackningens innehåll:	0.044 cm³
Nettoviktspall:	244188 g
AirPlay:	Ja
GTIN-nummer pallet (EAN/UPC):	6925281974922