Makita DUB187 Bruksanvisning

Makita Lövblåsare DUB187

Läs nedan 📖 manual på svenska för Makita DUB187 (12 sidor) i kategorin Lövblåsare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
INSTRUCTION MANUAL
Cordless Blower Vacuum
DUB187
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUB187
Capacities
(Blower)
Air volume 4.2 m3/min
Air speed (average) 52 m/s
Air speed (max.) 64 m/s
Capacities
(Vacuum)
Air volume 6.1 m3/min
Vacuum volume 25 liter
Overall length 1,168 mm
Rated voltage 18V d.c.
Net weight 3.7 - 4.0 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydi󰀨erfromcountrytocountry.
• Theweightmaydi󰀨erdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Recommended cord connected power source
Portable power pack PDC01
• Thecordconnectedpowersource(s)listedabovemaynotbeavailabledependingonyourregionofresidence.
• Beforeusingthecordconnectedpowersource,readinstructionandcautionarymarkingsonthem.
Symbols
Thefollowingsshowthesymbolswhichmaybeused
fortheequipment.Besurethatyouunderstandtheir
meaning before use.
Take particular care and attention.
Read instruction manual.
Keephandsawayfromrotatingparts.
Longhairmaycauseentanglement
accident.
Keepbystandersaway.
Weareyeandearprotection.
Do not expose to moisture.
OnlyforEUcountries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
andbatteriesmayhaveanegativeimpact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and on accumulators and batteries and
waste accumulators and batteries, as well as
their adaptation to national law, waste elec-
trical equipment, batteries and accumulators
shouldbestoredseparatelyanddelivered
to a separate collection point for municipal
waste, operating in accordance with the
regulations on environmental protection.
Thisisindicatedbythesymbolofthecrossed-
out wheeled bin placed on the equipment.
97
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Intended use
The machine is intended for blowing and vacuuming.
Never use the machine for other purposes. Failure to do
somaycauseinjury.
3 ENGLISH
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN50636-2-100:2014:
Sound pressure level (LpA ) : 81.8 dB (A)
Uncertainty(K):3dB(A)
Sound power level (LWA) : 94.32 dB (A)
Uncertainty(K):0.94dB(A)
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:
Thedeclarednoiseemissionvalue(s)may
alsobeusedinapreliminaryassessmentofexposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can di󰀨er from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o󰀨 and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN50636-2-100:2014:
Work mode: operation without load (blowing)
Vibration emission (ah) : < 2.5 m/s2
Uncertainty(K):1.5m/s2
Work mode: operation without load (vacuuming)
Vibration emission (ah) : < 2.5 m/s2
Uncertainty(K):1.5m/s2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalso
beusedinapreliminaryassessmentofexposure.
WARNING: The vibration emission during
actual use of the power tool can di󰀨er from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o󰀨 and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
Cordless Blower Vacuum Safety
Instructions
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructionsmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
Training
1. Read the instructions carefully. Be familiar
with the controls and the correct use of the
machine.
2. Never allow children, persons with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge or people
unfamiliar with these instructions to use the
machine. Local regulations may restrict the
age of the operator.
3. Never operate the machine while people, espe-
cially children, or pets are nearby.
4. Keep in mind that the operator or user is
responsible for accidents or hazards occurring
to other people or their property by failure
to follow the instructions in this instruction
manual.
Preparation
1. Always wear substantial footwear and long
trousers while operating the machine.
2. Do not wear loose clothing or jewellery that
can be drawn into the air inlet. Keep long hair
away from the air inlets.
3. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z87.1 in
the USA, EN 166 in Europe, or AS/NZS 1336
in Australia/New Zealand. In Australia/New
Zealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer's responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.

Produktspecifikationer

Varumärke: Makita
Kategori: Lövblåsare
Modell: DUB187

Behöver du hjälp?

Om du behöver hjälp med Makita DUB187 ställ en fråga nedan och andra användare kommer att svara dig


Lövblåsare Makita Manualer

Makita

Makita UB001C Bruksanvisning

7 Januari 2025
Makita

Makita DUB187 Bruksanvisning

17 December 2024
Makita

Makita UB400MP Bruksanvisning

15 December 2024
Makita

Makita DUB183Z Bruksanvisning

8 Oktober 2024
Makita

Makita UB141D Bruksanvisning

17 September 2024
Makita

Makita DUB185Z Bruksanvisning

13 September 2024
Makita

Makita UB1101 Bruksanvisning

8 September 2024
Makita

Makita DUB363PT2V Bruksanvisning

21 Augusti 2024
Makita

Makita DUB362PT2 Bruksanvisning

21 Augusti 2024
Makita

Makita BBX7600 Bruksanvisning

20 Augusti 2024

Lövblåsare Manualer

Nyaste Lövblåsare Manualer

Ozito

Ozito PXBVS-018 Bruksanvisning

6 Januari 2025
Ryobi

Ryobi RY404012 Bruksanvisning

5 Januari 2025
Ryobi

Ryobi RY404015 Bruksanvisning

5 Januari 2025
Milwaukee

Milwaukee M18 Fuel 3017-21HD Bruksanvisning

4 Januari 2025
Gardol

Gardol GLB 800 B Bruksanvisning

1 Januari 2025
Gardenline

Gardenline GLLS 2501 Bruksanvisning

30 December 2025
Gardenline

Gardenline GLLS 2506 Bruksanvisning

30 December 2025
EGO

EGO LB5301E Bruksanvisning

30 December 2025
EGO

EGO SNT2400E-K2753 Bruksanvisning

30 December 2025
Prowork

Prowork PG-EL 2450 E Bruksanvisning

27 December 2024