Makita GA5020Y Bruksanvisning

Makita Slipmaskin GA5020Y

Läs nedan 📖 manual på svenska för Makita GA5020Y (12 sidor) i kategorin Slipmaskin. Denna guide var användbar för 30 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

WARNING:

For your personal safety, READ and UNDERSTAND before using.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Angle Grinder

GA5020

GA5020C

GA5021

GA5021C

GA6020

GA6020C

GA6021

GA6021C

008074

ENGLISH

SPECIFICATIONS

Model GA5020 GA5021 GA5020C /

GA5021C GA6020 GA6021 GA6020C /

GA6021C

Depressed center wheel diameter

125 mm 125 mm 125 mm 150 mm 150 mm 150 mm

Spindle thread M14 M14 M14 M14 M14 M14

No load speed (n

o) / Rated

speed (n) 11,000 min-1 11,000 min-1 10,000 min-1 10,000 min-1 10,000 min-1 9,000 min-1

Overall length 356 mm 384 mm 390 mm 356 mm 384 mm 390 mm

Net weight 2.7 kg 2.7 kg 2.9 kg 3.0 kg 2.8 kg 3.0 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END202-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Wear safety glasses.

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible

recycling facility.

ENE048-1

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and

can only be operated on single-phase AC supply. They

are double-insulated in accordance with European

Standard and can, therefore, also be used from sockets

without earth wire.

GEA005-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal safety

10. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

12. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your finger on the switch or energising power

tools that have the switch on invites accidents.

13. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

14. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

15. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving

parts.

16. If devices are provided for the connection of

dust extraction and collection facilities,

ensure these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

Power tool use and care

17. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

18. Do not use the power tool if the switch does

not turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

19. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

20. Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

21. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

22. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

23. Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the power

tool for operations different from those intended

could result in a hazardous situation.

Service

24. Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

25. Follow instruction for lubricating and

changing accessories.

26. Keep handles dry, clean and free from oil and

grease.

GEB033-2

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to grinder safety rules. If you use this tool unsafely

or incorrectly, you can suffer serious personal

injury.

Safety Warnings Common for Grinding, Sanding,

Wire Brushing, or Abrasive Cutting-Off Operations:

1. This power tool is intended to function as a

grinder, sander, wire brush or cut-off tool.

Read all safety warnings, instructions,

illustrations and specifications provided with

this power tool. Failure to follow all instructions

listed below may result in electric shock, fire

Produktspecifikationer

Varumärke:	Makita
Kategori:	Slipmaskin
Modell:	GA5020Y
Typ av operation:	Touch
Magnetronkraft:	1000 W
Färg på produkten:	Black, Stainless steel
Dörrgångjärn:	Neer
Inbyggd display:	Ja
Vikt:	38000 g
Bredd:	596 mm
Djup:	548 mm
Höjd:	455 mm
Nettoskatt:	3650 W
Uppvärmningsfunktion:	Ja
Grill:	Ja
Sladdlängd:	1.2 m
Barnlås:	Ja
Ljudnivå:	- dB
Förpackningens vikt:	40000 g
Belysning inuti:	Ja
Integrerad klocka:	Ja
Typ av klocka:	Elektronisch
Konvektionsmatlagning:	Ja
Husmaterial:	Glass, Stainless steel
Typ av lampa:	LED
Total inomhuskapacitet (ugnar):	45 l
Antal ugnar:	1
Antal automatiska program:	14
Kontrollposition:	Voorkant
Installationsfackets bredd:	560 mm
Installationsfack djup:	550 mm
Installationsfack höjd:	450 mm
Nuvarande:	16 A
På / Av knapp:	Ja
Energiförbrukning (konventionell):	- kWu
Energiförbrukning (tvungen konvektion):	- kWu
Att laga:	Ja
Typ av ugn:	Elektrische oven
Total ugnseffekt:	3650 W
Ugn med nettokapacitet:	45 l
Magnetronbereiding:	Ja
Över- och undervärme:	Ja
Ugnens termostatområde:	30 - 300 °C
Självrengörande:	Ja
Skriv timer:	Digitaal
Restvärmeindikator:	Ja
Automatisk avstängningstimer lagar mat på ett säkert sätt:	Ja
Certifiering:	CE, VDE
Snabb värme:	Ja
Antal rutnät:	1
Ugnskraft:	3650 W
Innermått (B x D x H):	480 x 392 x 237 mm
Antal mikrovågsenerginivåer:	5
Maximal temperatur (konventionell):	30 °C
Maximal temperatur (konvektion):	300 °C
AC-ingångsspänning:	220-240 V
AC-ingångsfrekvens:	50 - 60 Hz
Type beeldscherm:	TFT
Ugnsavfrostningsfunktion:	Ja