Makita GS5000 Bruksanvisning
Makita
Slipmaskin
GS5000
Läs nedan 📖 manual på svenska för Makita GS5000 (12 sidor) i kategorin Slipmaskin. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Straight Grinder
GS5000
GS6000
013595
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model GS5000 GS6000
Maximum wheel capacity (diameter X thickness) 125 mm × 20 mm 150 mm × 20 mm
Spindle thread M14 or 1/2" (country specific)
No load speed (min
-1) 5,600
With support cover 590 mm 590 mm
Overall length Without support cover 588 mm 588 mm
With support cover 5.0 kg 5.2 kg
Net weight Without support cover 4.9 kg 5.0 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-8
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Wear safety glasses.
･ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of the European
Directive, on Waste Electric and
Electronic Equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE050-1
Intended use
The tool is intended for grinding ferrous materials or
deburring castings.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Model GS5000, GS6000
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA) : 83 dB(A)
Sound power level (L
WA) : 94 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Work mode : surface grinding
Vibration emission (ah,SG) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
ENG902-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
3
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-16
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Straight Grinder
Model No./ Type: GS5000, GS6000
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
18.8.2012
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
10. Use of power supply via a RCD with a rated
residual current of 30mA or less is always
recommended.
Personal safety
11. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
12. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
13. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your finger on the switch or energising power
tools that have the switch on invites accidents.
Produktspecifikationer
| Varumärke: | Makita |
| Kategori: | Slipmaskin |
| Modell: | GS5000 |
Behöver du hjälp?
Om du behöver hjälp med Makita GS5000 ställ en fråga nedan och andra användare kommer att svara dig
Slipmaskin Makita Manualer
3 April 2025
28 Mars 2025
28 Mars 2025
8 Januari 2025
23 December 2024
14 Oktober 2024
13 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
Slipmaskin Manualer
- Slipmaskin Bosch
- Slipmaskin AEG
- Slipmaskin DeWalt
- Slipmaskin Adler
- Slipmaskin Aquapur
- Slipmaskin Silverline
- Slipmaskin Toolland
- Slipmaskin Ferm
- Slipmaskin Ozito
- Slipmaskin Gude
- Slipmaskin Gorenje
- Slipmaskin Silvercrest
- Slipmaskin Tryton
- Slipmaskin Hitachi
- Slipmaskin Black And Decker
- Slipmaskin Vonroc
- Slipmaskin Maestro
- Slipmaskin Stanley
- Slipmaskin Skil
- Slipmaskin Hyundai
- Slipmaskin Yato
- Slipmaskin Hilti
- Slipmaskin Ryobi
- Slipmaskin Florabest
- Slipmaskin Profitec
- Slipmaskin Festool
- Slipmaskin Metabo
- Slipmaskin United Office
- Slipmaskin Parkside
- Slipmaskin Worx
- Slipmaskin Meec Tools
- Slipmaskin Milwaukee
- Slipmaskin Hikoki
- Slipmaskin Mesko
- Slipmaskin Dremel
- Slipmaskin ABB
- Slipmaskin Hazet
- Slipmaskin Einhell
- Slipmaskin Baumr-AG
- Slipmaskin Husqvarna
- Slipmaskin Maktec
- Slipmaskin Steren
- Slipmaskin Bort
- Slipmaskin Tanaka
- Slipmaskin Craftsman
- Slipmaskin Yamato
- Slipmaskin Malmbergs
- Slipmaskin Power Craft
- Slipmaskin Powerplus
- Slipmaskin Porter-Cable
- Slipmaskin Cotech
- Slipmaskin Genesis
- Slipmaskin Bunn
- Slipmaskin Eibenstock
- Slipmaskin Scheppach
- Slipmaskin Gamma
- Slipmaskin Powerfix
- Slipmaskin Kress
- Slipmaskin Bavaria
- Slipmaskin Dolmar
- Slipmaskin Flex
- Slipmaskin Duro
- Slipmaskin Nuova Simonelli
- Slipmaskin Kawasaki
- Slipmaskin Fieldmann
- Slipmaskin Pattfield
- Slipmaskin Defort
- Slipmaskin Truper
- Slipmaskin Solo
- Slipmaskin Bruder Mannesmann
- Slipmaskin Cocraft
- Slipmaskin Meister Craft
- Slipmaskin Toolcraft
- Slipmaskin RIDGID
- Slipmaskin Batavia
- Slipmaskin Proxxon
- Slipmaskin Westfalia
- Slipmaskin Holzmann
- Slipmaskin Fein
- Slipmaskin Black Decker
- Slipmaskin Stomer
- Slipmaskin Dolmar(Makita)
- Slipmaskin Goon
- Slipmaskin Sthor
- Slipmaskin Ergofix
- Slipmaskin Global
- Slipmaskin Neo
- Slipmaskin Graphite
- Slipmaskin NEO Tools
- Slipmaskin Rikon
- Slipmaskin Duro Pro
- Slipmaskin Victoria Arduino
- Slipmaskin Alpha Tools
- Slipmaskin Felisatti
- Slipmaskin SW-Stahl
- Slipmaskin ATI-ZDL
- Slipmaskin Cleco
- Slipmaskin Gude Pro
- Slipmaskin Einhell Bavaria
- Slipmaskin McKenzie
- Slipmaskin Proviel
- Slipmaskin Gladiator
- Slipmaskin Rodcraft
- Slipmaskin Bavaria By Einhell
- Slipmaskin Chicago Pneumatic
- Slipmaskin Mirka
- Slipmaskin Classic Power
- Slipmaskin Handwerk
- Slipmaskin Kraftronic
Nyaste Slipmaskin Manualer
30 Mars 2025
29 Mars 2025
29 Mars 2025
29 Mars 2025
28 Mars 2025
25 Mars 2025
6 Februari 2025
4 Februari 2025
4 Februari 2025
1 Februari 2025