Makita M4000 Bruksanvisning

Läs nedan 📖 manual på svenska för Makita M4000 (9 sidor) i kategorin Lövblåsare. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/9
GB Blower Instruction manual
F Souffleur Manuel d’instructions
D Gebläse Betriebsanleitung
I Soffiante Istruzioni per l’uso
NL Luchtblazer Gebruiksaanwijzing
E Sopladora Manual de instrucciones
P Soprador Manual de instruções
DK Blæser Brugsanvisning
GR Φυσητήρας Οδηγίες χρήσης
TR Üfleyici Kullanım kılavuzu
M4000
013218
2
1 2013219 013220
3 4013221 006296
5 6013222 013223
7013224
12
3
A
B
4 5 6
7
48
8
3
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
Specifications may differ from country to country.
Weight according to EPTA-Procedure 01/2003
Intended use ENE018-1
The tool is intended for blowing dust.
Power supply ENF002-2
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
General Power Tool Safety
Warnings GEA010-1
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
BLOWER SAFETY WARNINGS
GEB073-1
1. Always use protective goggles, a cap and mask
when using the blower.
2. Never point the nozzle at anyone in the vicinity
when using the blower.
3. Warning - Electric shock could occur if used on
wet surfaces. Do not expose to rain. Store
indoors.
4. Never block suction inlet and/or blower outlet.
Increased motor revolution may cause dangerous
fan breakage.
5. The blower is not intended for use by young
children or infirm persons without supervision.
6. Young children should be supervised to ensure
that they do not play with the blower.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
FUNCTIONAL DESCRIPTION
CAUTION:
Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action
CAUTION:
Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
“OFF” position when released. (Fig. 1)
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger and then
push in the lock button, and then release the switch
trigger.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
Air volume adjusting dial (Fig. 2)
Air speed and volume can be adjusted without positive
stops by turning the air volume adjusting dial.
To obtain high speed and increase volume, turn the air
volume adjusting dial to the A direction shown in the figure
(for the bigger number). Turn the air volume adjusting dial
to the B direction (for the smaller number) to obtain low
speed and to decrease the air volume.
1. Switch trigger
2. Lock button
3. Air volume adjusting dial
4. Nozzle
5. Pin
6. Blower outlet
7. Notch
8. Sash nozzle
Model M4000
Capacities Max. air volume 1.2 - 2.9 m3/min.
No load speed (min-1 ) 8,500 - 16,000
Overall length 427 mm
Net weight 1.5 kg
Safety class /II

Produktspecifikationer

Varumärke: Makita
Kategori: Lövblåsare
Modell: M4000

Behöver du hjälp?

Om du behöver hjälp med Makita M4000 ställ en fråga nedan och andra användare kommer att svara dig




Lövblåsare Makita Manualer

Lövblåsare Manualer

Nyaste Lövblåsare Manualer