Makita SD100DZ Bruksanvisning

Makita Skärmaskin SD100DZ

Läs nedan 📖 manual på svenska för Makita SD100DZ (12 sidor) i kategorin Skärmaskin. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/12

INSTRUCTION MANUAL

Cordless Drywall Saw

SD100D

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: SD100D

Length of stroke 6 mm

Strokes per minute 0 - 6,000 min-1

Maximum cutting capacities 30 mmDrywall

Wood 15 mm

Rated voltage D.C. 10.8 V - 12 V max

Standard battery cartridges BL1016, BL1021B BL1041B

Overall length 239 mm 248 mm

Net weight 1.5 kg 1.6 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsandbatterycartridgemaydifferfromcountrytocountry.

• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003

Symbols

Thefollowingshowthesymbolsusedfortheequip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Ni-MH

Li-ion

OnlyforEUcountries

Donotdisposeofelectricequipmentorbattery

pack together with household waste material!

InobservanceoftheEuropeanDirectives,

onWasteElectricandElectronic

EquipmentandBatteriesandAccumulators

andWasteBatteriesandAccumulators

and their implementation in accordance

withnationallaws,electricequipmentand

batteries and battery pack(s) that have

reached the end of their life must be col-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

Thistoolisintendedforplunge-cuttingofadrywall.

Wood can also be cut by installing a suitable saw blade.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to 60745-2-11:

Sound pressure level (LpA):77dB(A)

Uncertainty(K):3dB(A)

Thenoiselevelunderworkingmayexceed80dB(A).

WARNING: Wear ear protection.

Vibration

Thevibrationtotalvalue(tri-axialvectorsum)deter-

mined according to 60745-2-11:

Work mode: cutting drywall (thickness 30 mm)

Vibration emission (ah):3.0m/s2

Uncertainty(K):1.5m/s2

Work mode: cutting chip board (thickness 15 mm)

Vibration emission (ah):5.5m/s2

Uncertainty(K):1.5m/s2

NOTE:Thedeclaredvibrationemissionvaluehas

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE:Thedeclaredvibrationemissionvalue

may also be used in a preliminary assessment of

exposure.

WARNING:Thevibrationemissionduringactual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings and

all instructions. Failure to follow the warnings and

instructionsmayresultinelectricshock,reand/or

seriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

3 ENGLISH

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust.Powertoolscreatesparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators.Thereisanincreasedriskofelec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use.Useofacord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply.UseofanRCDreduces

the risk of electric shock.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication.Amomentofinattentionwhileoperating

powertoolsmayresultinseriouspersonalinjury.

2. Use personal protective equipment. Always

wear eye protection.Protectiveequipmentsuch

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

willreducepersonalinjuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

yourngerontheswitchorenergisingpowertools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on.Awrenchorakeyleft

attached to a rotating part of the power tool may

resultinpersonalinjury.

5. Do not overreach. Keep proper footing and

balance at all times.Thisenablesbettercontrol

of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts.Looseclothes,jewellery

or long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.Useof

dust collection can reduce dust-related hazards.

Power tool use and care

1. Do not force the power tool. Use the correct

power tool for your application.Thecorrect

powertoolwilldothejobbetterandsaferatthe

rate for which it was designed.

2. Do not use the power tool if the switch does

not turn it on and off.Anypowertoolthatcannot

be controlled with the switch is dangerous and

must be repaired.

Disconnect the plug from the power source and/or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool

or these instructions to operate the power tool.Power

tools are dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

6. Keep cutting tools sharp and clean.Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

7. Use the power tool, accessories and tool bits

etc. in accordance with these instructions, tak-

ing into account the working conditions and

the work to be performed.Useofthepowertool

for operations different from those intended could

result in a hazardous situation.

Battery tool use and care

1. Recharge only with the charger specied by

the manufacturer.Achargerthatissuitablefor

onetypeofbatterypackmaycreateariskofre

when used with another battery pack.

2. Use power tools only with specically desig-

nated battery packs.Useofanyotherbattery

packsmaycreateariskofinjuryandre.

3. When battery pack is not in use, keep it away

from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal

objects, that can make a connection from one

terminal to another. Shorting the battery termi

nalstogethermaycauseburnsorare.

Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact acci-

dentally occurs, ush with water. If liquid contacts

eyes, additionally seek medical help.Liquidejected

from the battery may cause irritation or burns.

Service

1. Have your power tool serviced by a qualied

repair person using only identical replacement

parts.Thiswillensurethatthesafetyofthepower

tool is maintained.

2. Follow instruction for lubricating and chang-

ing accessories.

Keep handles dry, clean and free from oil and grease.

Produktspecifikationer

Varumärke:	Makita
Kategori:	Skärmaskin
Modell:	SD100DZ

Behöver du hjälp?

Om du behöver hjälp med Makita SD100DZ ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Skärmaskin Makita Manualer

Makita EK7301 Bruksanvisning

13 Augusti 2024

Makita DSC121ZKX1 Bruksanvisning

11 Augusti 2024

Makita DUR368AZ Bruksanvisning

5 Augusti 2024

Makita SC103DSAJ Bruksanvisning

5 Augusti 2024

Makita CC300DWE Bruksanvisning

3 Augusti 2024

Makita SD100DZ Bruksanvisning

25 Juli 2024

Skärmaskin Manualer

Nyaste Skärmaskin Manualer

Eldom Sliss KR350 Bruksanvisning

26 Oktober 2024

RGV Desy AF 220 AM Bruksanvisning

26 Oktober 2024

RGV Desy AF 275 F Bruksanvisning

26 Oktober 2024

Royal Catering RCKS-3 Bruksanvisning

16 Oktober 2024

Royal Catering RCKS-2 Bruksanvisning

16 Oktober 2024

Royal Catering RCAM-250E Bruksanvisning

15 Oktober 2024

Royal Catering RCAM-250PRO Bruksanvisning

15 Oktober 2024

Royal Catering RCAM-250EXPERT Bruksanvisning

15 Oktober 2024

Princess Classic Multi Food Slicer 492977 Bruksanvisning

10 Oktober 2024

Severin AS 3914 Bruksanvisning

9 Oktober 2024