Maktec MT924 Bruksanvisning
Maktec
Orbital slipmaskiner
MT924
Läs nedan 📖 manual på svenska för Maktec MT924 (24 sidor) i kategorin Orbital slipmaskiner. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/24
GB
Random Orbit Sander Instruction Manual
F
Ponceuse Orbitale à Disque Manuel d’instructions
D
Exzenterschleifer Betriebsanleitung
I
Levigatrice rotorbitale Istruzioni per l’uso
NL
Excenter schuurmachine Gebruiksaanwijzing
E
Lijadora Orbital Manual de instrucciones
P
Lixadeira Roto-Orbital Manual de instruções
DK
Excentersliber Brugsanvisning
GR
Λειαvτής τυχαίας τροχιάς Οδηγίες χρήσεως
MT924
2
1 2
3 4
5
1
2
3
2
3
ENGLISH (Original instructions)
Explanation of general view
1 Switch 2 Dust bag 3 Dust nozzle
SPECIFICATIONS
Model MT924
Paper size............................................................ 125 mm
Orbits per minute (min –1)....................................... 12,000
Dimensions (L x W x H) .... 153 mm x 123 mm x 144 mm
Net weight .............................................................. 1.2 kg
Safety class ............................................................. /II
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
ENE052-1
Intended use
The tool is intended for the sanding of large surface of
wood, plastics and metal materials as well as painted
surfaces.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
GEA010-1
General Power Tool Safety Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future refer-
ence.
GEB021-4
SANDER SAFETY WARNINGS
1. Always use safety glasses or goggles. Ordinary
eye or sun glasses are NOT safety glasses.
2. Hold the tool firmly.
3. Do not leave the tool running. Operate the tool
only when hand-held.
4. This tool has not been waterproofed, so do not
use water on the workpiece surface.
5. Ventilate your work area adequately when you
perform sanding operations.
6. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
7. Use of this tool to sand some products, paints
and wood could expose user to dust containing
hazardous substances. Use appropriate respira-
tory protection.
8. Be sure that there are no cracks or breakage on
the pad before use. Cracks or breakage may
cause a personal injury.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
tion manual may cause serious personal injury.
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action (Fig. 1)
CAUTION:
• Before plugging in the tool, always be sure that the tool
is switched off.
To start the tool, press the “I (ON)” side of the switch. To
stop, press the “O (OFF)” side of the switch.
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
Installing or removing abrasive disc (Fig. 2)
To install the abrasive disc, first remove all dirt or foreign
matter from the pad. Then peel off the backing paper
from the abrasive disc and attach the abrasive disc to the
pad. Be careful to align the holes in the abrasive disc with
those in the pad.
CAUTION:
• If you peel off the abrasive disc from the pad, its adhe-
sion will become poor. Never attempt to stick it onto the
pad for further use.
Installing dust bag (Fig. 3)
Install the dust bag on the tool so that the logo on the
dust bag will be upright (not upside down).
Emptying dust bag (Fig. 4)
When the dust bag is about half full, switch off and
unplug the tool. Remove the dust bag from the tool. Then
remove the dust nozzle from the dust bag after unlocking
the dust nozzle by turning it slightly counterclockwise.
Empty the dust bag by tapping it lightly.
After emptying the dust bag, install the dust nozzle on the
dust bag. Turn the dust nozzle slightly clockwise to lock it
in place. Then install the dust bag on the tool as
described in “Installing dust bag”.
Produktspecifikationer
| Varumärke: | Maktec |
| Kategori: | Orbital slipmaskiner |
| Modell: | MT924 |
Behöver du hjälp?
Om du behöver hjälp med Maktec MT924 ställ en fråga nedan och andra användare kommer att svara dig
Orbital slipmaskiner Maktec Manualer
13 Oktober 2024
Orbital slipmaskiner Manualer
- Orbital slipmaskiner DeWalt
- Orbital slipmaskiner Ozito
- Orbital slipmaskiner Black And Decker
- Orbital slipmaskiner Skil
- Orbital slipmaskiner Festool
- Orbital slipmaskiner Meec Tools
Nyaste Orbital slipmaskiner Manualer
18 Oktober 2024
11 Oktober 2024
9 Oktober 2024
29 Juli 2024
28 Juli 2024
24 Juli 2024
24 Juli 2024