Maxxus Bike 90R Pro Bruksanvisning

Maxxus Motionscykel Bike 90R Pro

Läs nedan 📖 manual på svenska för Maxxus Bike 90R Pro (32 sidor) i kategorin Motionscykel. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/32
ENG
MAXXUS 90R PRO
Bike
I N S TA L L AT I O N & O P E R AT I N G M A N U A L
2
Index
Index 2
Safety Instructions 3
Overall View of the Device 4
Fixing Materials 5
Tools Included in Delivery 5
Assembly 6 – 11
Seat Adjustment
Self Generator
12
11
Levelling 12
Transport, Location & Storage 13
Care, Cleaning & Maintenance 13
Cockpit 14 - 20
Pulse & Heart Rate 21 - 22
Training Recommendations 23 - 24
Technical Details 25
Disposal 25
FAQ 26
Recommended Accessories 26
Exploded Drawing 27
Spare Parts List 28 - 29
Warranty 30
31
Service Contract
© 2019 MAXXUS Group GmbH & Co. KG
All rights reserved / All rights reserved
This publication may not be reproduced, stored in a retrieval system, or transmitted in whole or in part, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise without the prior written permission of Maxxus Group GmbH & Co. KG.
Errors, colour and technical modification subject to change, reproduction as well as electronic duplication only with written permission of MAXX-
US Group GmbH & Co. KG.
3
Safety Instructions
Before you start exercising, be sure to read the entire operating manual, especially the Safety Information, the Maintenance
and Cleaning Information and the Training Information. Also make sure that anyone else who uses this training device is famil-
iar with this information and observes it.
Always follow the maintenance and safety instructions in this manual very carefully.
This training device may only be used for its specific intended use. Any misuse can cause risk of possible accident, damage to
health or damage to the device for which the Distributor will not assume any liability.
Electrical Connection (only applies to devices with an external electrical connection)
A mains voltage of 220-230V is required to operate this training device.
The training device is only to be connected to the mains with the mains cable supplied using a 16A individually fused and
earthed socket installed by a qualified electrician.
Always remove the electric plug from the socket before moving the training device.
Remove the electric plug from the socket before commencing any cleaning, maintenance or other works.
Do not connect the mains plug to a socket on a socket strip or on a cable drum.
If using a cable extension please ensure that this complies with DIN standards, VDE regulations and guidelines, technical
rules issued by other European Union states.
Always place the mains cable so it cannot be damaged or cause a tripping hazard.
In operating or standby mode, electrical devices such as mobile phones, PCs, Televisions (LCD, plasma, tube, etc.), game
consoles etc. will emit electro-magnetic radiation. For this reason, all these types of devices should be kept away from
your training device as they could lead to malfunction, disturbances or false outputs being shown in heart rate measure-
ments.
For safety reasons, always remove the electrical plug from the socket when the device is not in use.
Training Environment
Select a suitable space for your training device to provide an optimum amount of free space and highest level of safety.
You should leave a safety distance of at least 100 cm behind the training device and at least 100cm to each side and in
front of the device.
Make sure that the area is well ventilated and that an optimum amount of oxygen is available during training. Avoid
draughts.
Your training device is not suitable for outside use and so storage and training can only take place in a temperate, clean
dry room.
The temperature range to operate or store this device is between a minimum of 10° and maximum of 30°
Do not operate or store your training device in wet areas such as in swimming pools, saunas etc.
Make sure that your training device is kept on flat, hard, clean ground both in operation and at rest. Any uneven surfaces
must be removed or made good.
It is recommended permanently to place a MAXXUS® Floor Protection Mat under the device to protect damageable floors
such as wood, laminates, floor tiles etc. Please ensure that the mat cannot slip or slide.
Do not put this training device on pale or white coloured carpets or rugs as the feet of the device may leave marks.
Make sure that your training device and mains cable are kept out of contact with hot surfaces and are kept at a safe dis-
tance from any sources of heat e.g. central heating, hot stoves, furnaces, ovens or open fires.
Personal Safety Instructions for Training
Remove the mains cable from the training device when not in use to avoid inappropriate or uncontrolled use by any other
third party, e.g. children.
You should have a health check carried out by your doctor before you start any training
Stop training immediately if you feel physically unwell or are experiencing any breathing di culties.翿
Always start your training session at a low workload increasing it slowly but steadily throughout. Reduce the workload
again towards the end of your training session.
Suitable sports shoes and clothes should always be worn during training sessions. Make sure that loose clothes do not
get caught up in the treadmill belt or rollers.
Your training device is only to be used by one person at a time.
Check each time before a training session to see if your device is in perfect condition. Never use your training device if it is
faulty or defective.
You are only permitted to carry out repairs to the device yourself after having contacted our Service Department and on
receipt of explicit permission to do so. Only original spare parts may be used at any time.
Your training device must be cleaned after each use. Remove all dirt including body sweat or any other liquids.
Always make sure that liquids (drinks, body sweat, etc.) do not get onto the vibrating plate or into the cockpit as this can
cause damage to the mechanical and electronic components.
Your training device is not suitable for use by children.
Third parties, especially children and animals, must be kept at an appropriate safety distance during training.
Check if there are any items underneath the training device before each training session and remove them without fail.
Never use the training device when items are underneath it.
Do not allow children to use your training device as a toy or climbing frame at any time.
Ensure that no body parts of your own or of third parties ever come in contact with any of the moving mechanisms.
The construction of this training device is based on state-of-the-art technology and highest modern technical safety standards.
This training device is to be used by adults only! Extreme misuse and/or unplanned training can cause damage to your health!
This training device is suitable for non-therapeutic purposes.

Produktspecifikationer

Varumärke: Maxxus
Kategori: Motionscykel
Modell: Bike 90R Pro

Behöver du hjälp?

Om du behöver hjälp med Maxxus Bike 90R Pro ställ en fråga nedan och andra användare kommer att svara dig




Motionscykel Maxxus Manualer

Motionscykel Manualer

Nyaste Motionscykel Manualer