McIntosh WS300 Bruksanvisning

McIntosh högtalare WS300

Läs nedan 📖 manual på svenska för McIntosh WS300 (6 sidor) i kategorin högtalare. Denna guide var användbar för 14 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/6

McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549

WS300

In-Wall Loudspeaker System

Installation Guide

WARNING - TO REDUCE RISK OF FIRE OR

ELECTRICAL SHOCK, DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

PERSONNEL.

IMPORTANT SAFETY

INSTRUCTIONS!

PLEASE READ THEM BEFORE

OPERATING THIS EQUIPMENT.

General:

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Warning: To reduce risk of fire or electrical shock, do not

expose this equipment to rain or moisture. This unit is

capable of producing high sound pressure levels. Continued

exposure to high sound pressure levels can cause permanent

hearing impairment or loss. User caution is advised and ear

protection is recommended when playing at high volumes.

6. Only use attachments/accessories specified by the

manufacturer.

Installation:

7. Install in accordance with the manufacturer’s instructions.

8.When mounting the Ceiling Loudspeaker System to a

building structure it is important to follow all of the local

building/construction codes. Make sure the ceiling structural

members can support a total weight of five times the weight

of the Ceiling Loudspeaker System.

9. Do not install near any heat sources such as radiators, heat

registers, stoves, or other equipment (including amplifiers)

that produce heat.

10. Do not use this equipment near water.

11. Do not expose this equipment to dripping or splashing and

ensure that no objects filled with liquids, such as vases, are

placed on the equipment.

Care of Equipment:

12. Clean only with a dry cloth.

13. Do not permit objects or liquids of any kind to be pushed,

spilled and/or fall into the equipment through enclosure

openings.

Repair of Equipment:

14. Refer all servicing to qualified service personnel. Servicing

is required when the equipment has been damaged in any

way, liquid has been spilled or objects have fallen into

the equipment, the equipment has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15. Do not attempt to service beyond that described in the

operating instructions. All other service should be referred

to qualified service personnel.

16. When replacement parts are required, be sure the service

technician has used replacement parts specified by

McIntosh or have the same characteristics as the original

part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

17. Upon completion of any service or repairs to this product,

ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

Please read these Safety Instrucons as well

as the Important Additional Operation

Information Guide that is enclosed.

Thank you from all of us at McIntosh

You have invested in a precision instrument that will

provide you with many years of enjoyment. Please take a

few moments to familiarize yourself with the features and

instructions to get the maximum performance from your

equipment.

If you need further technical assistance, please contact

your McIntosh Dealer who may be more familiar with

your particular setup including other brands. You can also

unlikely event of needing service.

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Technical Assistance Phone: (607) 723-3512

Customer Service (for repairs)

Phone: (607) 723-3515

Fax: 607-724-1917

support@mcintoshlabs.com

Website: mcintoshlabs.com

Make a Note

For future reference, you can write your serial number and

purchase information here. We can identify your purchase

from this information if the occasion should arise.

Serial Number:

Purchase Date:

Dealer Name:

Important Safety Instrucons

Table of Contents

Important Safety Instructions

��

Thank you from all of us at McIntosh

��

Make a Note

��

Tools Needed

��

Parts Included

��

Ready To Perform

��

Making a Hole

��

Installing the Frame

��

Connecting to Speaker Wire

��

Putting it in the Wall

��

Warranty

��

Specifications

��

Drivers

��

Tools Needed

• Phillips Screwdriver

• Drywall Knife or Saw

• Pencil

• Tape Measure

• Stud nder

• Bubble Level

Parts Included

• Loudspeaker Bafe and Enclosure

• Frame

• Frame Gaskets (2)

• Grille

• Cutout Template

• Clamping Pieces (2 already installed on frame)

• Frame Screws #10-24 x 3 inch (6 already installed)

• Bafe Washers #8 (4)

• Bafe Screws #10-24 x 1-1/2 inch (4)

Ready To Perform

The WS300 In-Wall Loudspeaker System is designed to

provide exceptional performance. This 3-way speaker

features McIntosh’s acclaimed MTM speaker array and

shallow woofer design contained in a fully enclosed

back chamber. The design allows for expansive sound

performance with a shallow footprint perfect for in-wall

mounting.

The Low Prole Micro-Flange Grill is magnetically held in

place. These grills are ready to be painted if you wish.

Making a Hole

For new construction, the RK300 rough-in bracket

is recommended. The RK300 is available from your

McIntosh Dealer. If you have installed the RK300 skip

ahead to “Installing the Frame”.

Choose the proper position for the WS300 keeping in

mind acoustical properties, the positions of studs and

ability to run speaker wire to the WS300. When the

proper location is found:

Hold the supplied cutout template against the wall and

align it using a bubble level and tape the template to the

wall.

Trace the opening.

For dry wall installation, use a drywall knife or saw to

cut a hole. The hole should be 13 1/4 inches (33.655cm)

wide by 13 1/4 inches (33.655cm) in height.

Installing the Frame

The Frame Assembly has two Clamping Pieces

connected to the Frame by Six 3-inch screws (3 each).

The bolt at the end of each screw is there to make sure it

stays connected and need not be moved.

Install the “L” shaped self-adhesive Frame Gaskets to the

rear of the Frame so that the Gaskets will sit between the

Frame and the wall when installed.

With the Clamping Pieces loose, manipulate the frame

into the opening in the wall. The Clamping Pieces can be

moved to allow the frame to t. Once in place, position

the Clamping Pieces against the back of the wallboard on

each side.

When satised that the Frame is level (using a bubble

level), tighten all six screws until the Frame is securely

attached to the wall.

Connecng to Speaker Wire

Prepare Speaker Wires for connection to the WS300.

Remove ½ inch (12.7 mm) of insulation from the wire

end and twist the strands together. For runs under 25

feet use at least 16AWG wire. For runs under 50 feet use

at least 14AWG, and for longer runs up to 100 feet use

12AWG. 12AWG, being the larger wire, can be used in

all the above cases if desired.

1. Pull enough speaker wire through the opening in the

Frame to connect to the WS300.

2. The two Loudspeaker Binding Posts are located

at the base of the Bafe Enclosure. Loosen the

Produktspecifikationer

Varumärke:	McIntosh
Kategori:	högtalare
Modell:	WS300

Behöver du hjälp?

Om du behöver hjälp med McIntosh WS300 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

högtalare McIntosh Manualer

McIntosh XRT1K Bruksanvisning

21 Oktober 2024

McIntosh XRT2.1K Bruksanvisning

21 September 2024

McIntosh XRT1.1K Bruksanvisning

17 September 2024

McIntosh ML1 Bruksanvisning

13 September 2024

McIntosh RS250 Bruksanvisning

2 Augusti 2024

McIntosh WS300 Bruksanvisning

30 Juli 2024

högtalare Manualer

Nyaste högtalare Manualer

Phonic AURRAS 6A Bruksanvisning

11 December 2024

MB PESSPROVS61A Bruksanvisning

11 December 2024

Bogen WMT1AS Bruksanvisning

11 December 2024

Ruark Audio Sabre-R Bruksanvisning

11 December 2024

Antelope R4S Bruksanvisning

11 December 2024

Antelope Atlas i8 Bruksanvisning

11 December 2024

MB PESSPROVS62A Bruksanvisning

11 December 2024

MB PESSPROVS32A Bruksanvisning

11 December 2024

Pro-Ject Speaker Box 3E Carbon Bruksanvisning

11 December 2024

AudioSource AC6C Bruksanvisning

10 December 2024