Meliconi Gumbody UNIVERSAL 3-300 Bruksanvisning

Meliconi Fjärrkontroll Gumbody UNIVERSAL 3-300

Läs nedan 📖 manual på svenska för Meliconi Gumbody UNIVERSAL 3-300 (5 sidor) i kategorin Fjärrkontroll. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
1
U S I N G T H E K E Y S AN D FUN C T I O N S
The functions described below are only available
if they are already foreseen by your TV.
Keep this booklet in case you ever need to consult us in the future.
Thanks to the enclosed CD and to the on-line guide on the site www.meliconi.com/guide
it is even easier and faster to programme the remote control and discover
all the potential offered by the UNIVERSAL 3-300.
P R EPARE F O R US E
Read these instructions carefully before programming your remote control!
Thanks to its large database and numerous functions the remote control is ideal forUNIVERSAL 3-300
replacing up to 3 remote controls of any brands for TV - DVD/CR (
Video Recorder
) SAT/TER (
Digital Terrestrial
).
Its ergonomic form and casing in soft rubber make it easy to grip and protect it against falls and bumps.
Thank you for choosing a MELICONI remote control.
UNIVERSAL 3-300
Keys for selecting which appliance
you want to use.
They light up whenever a command
is sent to the selected appliance.
Teletext keys
ON/OFF key to turn the selected
appliance on and off
Keys that the user can customize
to memorize and access
additional commands
Confirm key
To move around within
the or to controlMENU
the BRIGHTNESS/COLOUR
VCR/DVD function keys:
RECORD - PAUSE STOP PLAY - -
or functionsfastext
Specific area for SET TOP BOX
To select the next ( ) orP+
previous (P-) channel or programme
Control the volume using +/
MUTE
turns the volume on and off
FORWARD / REWIND
functions for VCR DVD and
Number keys
To select an external input terminal
GB
1. Turn on the appliance to be programmed:
- if a , insert a cassetteVCR
- if a SAT TER or select a programme
- if a insert a DVD.DVD
2. Look in the Code Book for the brand of the appliance to
be programmed and make a note of the corresponding
code indicated alongside
(e.g. PHILIPS 0025)
.
3. Hold down the selection key for the appliance to be
programmed for 5 seconds.
4. When the key is released, it will start to flash. Enter the
brand code previously identified (
e.g. 0025
). The selection
key flashes more quickly to indicate that the remote control
is ready for the search.
5. Point the remote control at the appliance. Press and slowly
release the key or ON/OFF PLAY VCR DVD for the and
several times, when the appliance respondsstopping
correctly to the command.
6. When the appliance responds correctly, press toOK
confirm. Three flashes indicate that the search operation
has been completed correctly.
2
HOW TO PROGRAMME THE REMOTE CONTROL
FI T T I N G T H E B AT T ER I E S
Before programming and using the remote control,
fit the batteries.
The remote control requires 2 new batteries. Insert the batteries as shown:AAA/LR03
Change the batteries if the light indicator starts to flash
during use. The batteries are low.
Make a note of the codes for your appliances on the
adhesive label inside the battery cover in case you have
to reprogramme your remote control.
This remote control has a permanent memory and does
not lose the programmed codes or functions when the
batteries are removed.
To display and make a note of the code memorized by means of the search,
follow the instructions described in the paragraph CURRENT CODE DISPLAY.
ADDITIONAL CHECK
Check that some of the other functions used on your original remote control are working correctly. If the
commands function incorrectly or erratically, you have probably entered a code for a similar remote control
but not the right one. In this case, repeat the search procedure starting from , entering the codepoint 3
previously used (e.g. 0025).
PHILIPS 0025
The - TV - DVD SAT keys can be programmed according to your
requirements, following the procedure described below.
The quickest and easiest way to programme the remote control is
by consulting enclosed CD or the website www.meliconi.com/guide.
Warning: programme one appliance at a time!
+ + +
5 SEC.
or
or
or
N.B. THE LIGHT INDICATOR STOPS FLASHING.
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
• if an invalid brand code is entered
• if a key other than or ON/OFF PLAY is accidentally pressed
if the end of the code search list has been reached. In this case consult the enclosed CD or the site
www.meliconi.com/guide
GLOBAL SEARCH REMOTE CONTROL PROGRAMMING
The quickest and easiest way to programme the remote control is
by consulting enclosed CD or the website www.meliconi.com/guide.
Warning: programme one appliance at a time!
1. Turn on the appliance to be programmed:
- if a , insert a cassetteVCR
- if a SAT TER or select a programme
- if a insert a DVD.DVD
2. Hold down the selection key for the appliance to be
programmed for 5 seconds.
3. When the key is released, it will start to flash. Enter the
code 0000; the selection key flashes more quickly to
indicate that the remote control is ready for the search.
4. Point the remote control at the appliance. Press and slowly
release the ON/OFF key or PLAY VCR DVD for the and
several times, when the appliance respondsstopping
correctly to the command.
5. When the appliance responds correctly, press toOK
confirm. Three flashes indicate that the search operation
has been completed correctly.
ADDITIONAL CHECK
Check that some of the other functions used on your original remote control are working correctly. If the
commands function incorrectly or erratically, you have probably entered a code for a similar remote control
but not the right one. In this case, repeat the search procedure starting from .point 2
To display and make a note of the code memorized by means of the search,
follow the instructions described in the paragraph CURRENT CODE DISPLAY.
N.B. THE LIGHT INDICATOR STOPS FLASHING.
The remote control exits programming mode and the light indicator stops flashing:
• if no keys are pressed for 14 seconds
• if a key other than or ON/OFF PLAY is accidentally pressed
• if the end of the code search list has been reached. In this case consult the enclosed CD or the internet site
www.meliconi.com/guide
3
This operation can take up to 20 minutes and should be carried out if you have not succeeded in programming
the remote control by means of the method described above.
+ + +
5 SEC.
or
or
or

Produktspecifikationer

Varumärke: Meliconi
Kategori: Fjärrkontroll
Modell: Gumbody UNIVERSAL 3-300

Behöver du hjälp?

Om du behöver hjälp med Meliconi Gumbody UNIVERSAL 3-300 ställ en fråga nedan och andra användare kommer att svara dig




Fjärrkontroll Meliconi Manualer

Fjärrkontroll Manualer

Nyaste Fjärrkontroll Manualer