Meliconi Pratico 2 Bruksanvisning

Läs nedan 📖 manual på svenska för Meliconi Pratico 2 (5 sidor) i kategorin Fjärrkontroll. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
6
Thank you for choosing a Meliconi remote control.
Keep this booklet for future reference.
The Pratico 2 remote control is ideal for replacing up to 2 remote controls for TV - SAT (satellite decoder) - TER
(Digital Terrestrial decoder). It can also be connected to a PC using the Meliconi audio cable (to be purchased
separately), thereby allowing the user to download the most up-to-date con guration information. The remote
control has a non-volatile memory, meaning that it does not lose its settings even if there are no batteries in it.
IMPORTANT: The remote control must not be exposed to excessive heat sources.
USE OF THE BUTTONS AND FUNCTIONS
The functions of the buttons described below are available only if they exist on your device.
ON / OFF switches the device OFF and
in some cases ON
Buttons for selecting the device to
be controlled
Numeric keypad
Selects digital TV and radio
Volume control +/–
For selecting an
external input source
Con rm selection
For selecting the next programme
P+ or the previous programme P–
Fastext functions or for selecting sub-menus
using colours
TELETEXT buttons
Speci c buttons for decoder
Speci c buttons for decoder
For moving around within the MENU
MUTE turns sound OFF and ON
Selects
analogue/digital
Displays the list of programmes
I
EN
7
The Pratico 2 remote control is a universal remote with a memory containing data regarding numerous devices
produced by different brands on the market.
Each original device has a speci c code which must be used to set up the remote control.
So to use the Pratico 2 you must enter the speci c code for each device you wish to control.
So use one of the following methods to identify the correct code and set it in your remote control:
A) - INTERNET (recommended)
B) - CELL PHONE (SMS)
C) - MANUAL SEARCH
SETTING CODES
If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guide website
to identify the speci c codes for the devices you wish to command. Then set the codes manually in your
MELICONI remote control as described in the ENTERING THE CODE DIRECTLY procedure.
SETTING CODES USING INTERNET
Today, Meliconi gives customers who don’t have internet the chance to receive the codes for programming their
remote control directly on their cell phone.
Simply send an SMS to this number 0039 345 7518893 as follows: 2B, Type, Brand, Model
- Type = indicate the device to be controlled using one of the following abbreviations: TV - SAT - TER
(terrestrial decoder)
- Brand, Model = to indicate the brand and the model of the device to be controlled.
Example: 2B, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).
Once you have received the SMS with the list of codes, set the rst code in the remote control as described in
the ENTERING THE CODE DIRECTLY section.
Point the MELICONI remote control at the device, which should already be ON and press the ON/OFF button.
If the device does NOT switch off, try setting the consecutive code in the SMS list on the remote control.
SETTING CODES USING A CELL PHONE
(the service s fee and the only cost is that of sending the SMS,
which naturally depends on the rates of the service operator in question)
Before using the remote control, insert the batteries and programme it.
INSERTING THE BATTERIES
The remote control requires 2 new 1.5V alkaline AA/LR06 batteries. Insert
them as illustrated.
Try pressing a number button and check that the red light remains lit
continuously until you release the button. If the light ashes, the batteries
inserted are not charged and are about to go at, therefore you must
substitute them.
Do not leave at batteries inserted,
as liquid may leak and damage the remote control
8
NOTE: If you don’t receive an SMS on your cell phone or if the message says ERROR / NO CODE,
it means the system has not been able to process the data you have sent. Do not try sending
another SMS use the SETTING CODES USING A MANUAL SEARCH procedure instead.
When the device reacts check whether the other buttons are operating correctly too.
If they do, the remote control is ready to use.
If they don’t, you are probably using an incorrect code destined for a very similar device; at this point
ignore the SMS list and consult the SETTING CODES USING A MANUAL CODE section to nd a more suitable
code.
CHECK
Check that the other buttons correspond to the functions of the original remote control; if not, it is likely
that the code found is incorrect, but is used for a very similar device. In that case, repeat the procedure
from point 2.
If the manual search for the code is successful, obtain the code in use by following the DISPLAY CODE IN
USE procedure and make a note of it inside the battery cover.
NOTE: During the search the indicator stops ashing and the remote control exits the programming mode
in the following cases:
• if for 12 seconds the button indicated is not pressed or if another button is pressed
if the list of codes to nd is terminated. If this happens, go to the www.meliconi.com website
SETTING CODES USING A MANUAL SEARCH
(only to be performed if the speci c code could not be found)
1. Switch on the device and select a programme.
2. Press and hold down for 6 seconds the device selection
button corresponding to the device you wish to enter the
code for.
3. Release the button. The indicator light will ash. Point
the remote control at the device and press the ON/OFF
button. If the device does NOT switch off, press the
same button again slowly (it may be necessary to press
the button several times).
4. When the device responds correctly, press OK. Three
long ashes indicate that the operation has been carried
out correctly.
6 SEC.
or

Produktspecifikationer

Varumärke: Meliconi
Kategori: Fjärrkontroll
Modell: Pratico 2

Behöver du hjälp?

Om du behöver hjälp med Meliconi Pratico 2 ställ en fråga nedan och andra användare kommer att svara dig




Fjärrkontroll Meliconi Manualer

Fjärrkontroll Manualer

Nyaste Fjärrkontroll Manualer