Metra 99-8214TG Bruksanvisning

Metra Bilsats 99-8214TG

Läs nedan 📖 manual på svenska för Metra 99-8214TG (8 sidor) i kategorin Bilsats. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/8
METRA - The World’s best kits ®metraonline.com
REV. 3/7/2017 INST99-8214
Installation instructions for part 99-8214
®
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
Painted and textured to match factory dash
Available in: Black 99-8214TB or Gray 99-8214TG
Both kits are factorygolf ball textured
KIT FEATURES
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1761 • TYTO-01
Antenna Adapter: Not Required
Steering wheel control interface: ASWC-1
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
TOOLS REQUIRED
• A) Radio housing • B) Radio brackets • C) Radio trim panel • D) ISO brackets • E) ISO trim plate
• F) ISO DDIN trim plate • G) Clock/Hazard switch bracket • H) (4) #6 x 3/8” Phillips pan-head screws
• I) (4) #8 X 3/8” Phillips truss-head screws • J) (1) #10 x 3/4” Phillips pan-head screw • K) (4) Panel clips
• L) Plastic threaded insert
KIT COMPONENTS
B C D E F
A
I J K LG H
Dash Disassembly ..................................................2
Kit Preparation ........................................................3
Kit Assembly
– DIN radio provision with pocket 4 .............................
– ISO DIN radio provision with pocket 5 .......................
– ISO DDIN radio provision 6 ........................................
Table of Contents
99-8214
1. Unclip, unplug and remove the
climate control panel. (Figure A)
2. Remove the (4) 10mm screws
securing the bottom of the radio/
clock/hazard assembly. (Figure B)
3. Unclip, unplug, and remove the
radio/clock/hazard assembly.
(Figure C)
Continue to Kit Preparation
(Figure C)(Figure B)
SCAN
T EXT
PWR VO L
(Figure A)
SCAN
T EXT
PWR VOL
Dash Disassembly
99-8214
To the 99-8214 radio housing:
1. Attach the clock/hazard switch
bracket to the housing using the
(4) #6 x 3/8” Phillips pan-head
screws supplied. (Figure C)
WARNING: DO NOT OVERTIGHTEN
THE SCREWS.
2. Clip the factory clock/hazard
switch assembly into the bracket
housing assembly. (Figure D)
3. Attach the (4) to the panel clips
housing.
Continue to Kit Assembly
Kit Preparation
1. Attach the plastic threaded insert
into the sub-dash of the vehicle.
(Figure A)
From the factory radio/clock/hazard
assembly:
1. Unclip and remove the clock/
hazard switch assembly. (Figure B)
(Figure B)
(Figure C)
Rear view of
radio housing
(Figure A)
(Figure D)
H
M
PASSENG ER PASSENGER
Insert clock/hazard switch assembly from rear
of 99-8214 radio housing trim panel

Produktspecifikationer

Varumärke: Metra
Kategori: Bilsats
Modell: 99-8214TG

Behöver du hjälp?

Om du behöver hjälp med Metra 99-8214TG ställ en fråga nedan och andra användare kommer att svara dig




Bilsats Metra Manualer

Bilsats Manualer

Nyaste Bilsats Manualer