Metra JP-1019 Bruksanvisning

Metra högtalare JP-1019

Läs nedan 📖 manual på svenska för Metra JP-1019 (12 sidor) i kategorin högtalare. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 6/4/24 INSTJP-1019
I N S TA L L AT I O N I N S T R U C T I O N S
JP-1019
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
PRODUCT FEATURES
• Designed to adapt the factory
4" with up to a 6"-6.75" speaker
with a tweeter option
• Retains the OE dome light
• Speaker depth: 4"
• Mounting plate/cutting template
included
• Hardware included
• Harness included
WHAT’S IN THE BOX
• A) Replacement Grilles • B) Mounting Plate / Template • C) Speaker Harness
Not Shown: (10) Coarse Thread Screws, (10) M4 Socket Head Screws, (1) Roll 1/4" Foam Tape
TOOLS REQUIRED
• 5/64 Drill Bit
• 3/16 Allen Wrench
• 10mm Socket Wrench
• T-15 Torx
• T-30 Torx
• M3 Allen Key
• Phillips Bit
• Oscillating Saw or
other Cutting Device
TABLE OF CONTENTS
Soundbar Removal................................................2
Soundbar Disassembly...................................... 3-4
Cutting Guide .........................................................5
Speaker Installation...............................................6
Dome Light Installation......................................... 7
Replacement Grille Installation............................8
Mounting Specifications........................................9
Jeep Wrangler (JL) 2024-Up
Jeep Gladiator (JT) 2024-Up
Rear Soundbar Speaker Adapter Plates
Visit for more detailed information about the
MetraOnline.com
product and up-to-date vehicle specific applications
B C
386.257.1187
|
MetraOnline.com
2
SOUNDBAR REMOVAL
NOTE: It is highly recommended that the
soundbar be removed for install of this
speaker adapter kit. (Figure A)
1. Remove all panels along the top trim of
the interior of the vehicle to gain access
to the soundbar mounts.
2. Remove the (6) 10mm bolts that are
securing the soundbar in place.
3. Unplug the harness and remove the
soundbar from the vehicle.
Continue to Soundbar Disassembly
Figure A
REV. 6/4/24 INSTJP-1019 3
SOUNDBAR DISASSEMBLY
1. Remove (5) 3/16” screws holding the
factory grille in place. (Figure A)
2. Disconnect the harness to the attached
map light, and remove the factory grille
panel. Put grille aside until time for
reinstall. (Figure B)
3. Remove the (7) T-15 screws from the
speakers in the sound bar and remove
the speakers. (Figure C)
4. Remove the (5) T-30 screws holding the
port assembly in place, and remove the
port assembly. (Figure D)
Figure C
Figure B Figure D
Figure A

Produktspecifikationer

Varumärke: Metra
Kategori: högtalare
Modell: JP-1019

Behöver du hjälp?

Om du behöver hjälp med Metra JP-1019 ställ en fråga nedan och andra användare kommer att svara dig


högtalare Metra Manualer

Metra

Metra JP-1019 Bruksanvisning

14 Januari 2025
Metra

Metra BC-HDLFP Bruksanvisning

26 September 2024
Metra

Metra JP-1018 Bruksanvisning

26 September 2024

högtalare Manualer

Nyaste högtalare Manualer

Yamaha

Yamaha YPX-500 Bruksanvisning

14 Januari 2025
Exagerate

Exagerate XBTPET-CAT Bruksanvisning

14 Januari 2025
Exagerate

Exagerate XBTPET-DOG Bruksanvisning

14 Januari 2025
Wet Sounds

Wet Sounds REVO 6 XW-B V3 Bruksanvisning

14 Januari 2025
Wet Sounds

Wet Sounds REVO 8 XW-W V3 Bruksanvisning

14 Januari 2025
Wet Sounds

Wet Sounds ZERO 69 XZ-W Bruksanvisning

14 Januari 2025
Monitor Audio

Monitor Audio Gold 50 6G Bruksanvisning

14 Januari 2025
Wet Sounds

Wet Sounds REVO 6 SW-B V3 Bruksanvisning

14 Januari 2025
Wet Sounds

Wet Sounds REVO 8-XS-B-SS V3 Bruksanvisning

14 Januari 2025
Wet Sounds

Wet Sounds ZERO 69 XZ-B Bruksanvisning

14 Januari 2025