Metrix LX1600 Bruksanvisning

Läs nedan 📖 manual på svenska för Metrix LX1600 (21 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/21
GB
- User’s Guide
HX0074
DEMO Kit for
METRIX
Oscilloscopes
DIGITAL
OSCILLOSCOPES
1
2 METRIX Oscilloscope Demo Kit
HX0074 Demo Kit for METRIX Oscilloscopes
General description
The oscilloscope kit features a circuit which generates 15 varied and representative signals, along with a
guide that describes the nature of each signal, the METRIX oscilloscope model used to perform the test
and the correct calibrations for the equipment to obtain optimal visualisation.
The guide demonstrates the majority of the standard or advanced functions of these Digital Oscilloscopes,
thereby enabling users to familiarise themselves rapidly, but also promotes further understanding of how
digital oscilloscopes function in general so that best use can be made of them.
It features direct support for the following METRIX digital oscilloscopes, but can be used with other models,
insofar as they oer the same functions:
Ranges
SCOPIX + OXi 6204
MTX with SPO
OX 6000
Scopein@Box with SPO
HANDSCOPE
Presentation
The signal generator circuit is built around a microprocessor.
An LCD display and 2 UP/DOWN buttons let you select the desired signal.
It has two channels available via BNC connection: MAIN and AUX
It can be powered by a standard 9V battery or a mains adapter used to power METRIX Handscope
oscilloscope X03656A00 (selection of power supply by switch), for example.
The instructional manual contains a table of contents, which lists all the signals available and the models
concerned, a description page for each signal and an index at the end showing the test numbers according
to the dierent subjects handled.
Table of contents
Test Signal
Demo with
Page
MTX 3x5x SPO
MTX 105x SPO
OX 6xxx
SCOPIX
+ OXi 6204
HANDSCOPE
no. 1 : Miscellaneous
a), c)
2
no. 2 : Hystere sis
a), b)
3
no. 3 : Pulse train
4
no. 4 : Data train - CS
5
no. 5 : Data frame - Fault
c)
c)
6
no. 6 : AM Modulation sinus
b), c)
b), c)
b), c)
7
no. 7 : Square rise time
a)
8
no. 8 : W square with noise eak
9
no. 9 : Fast pulse comb
10
no. 10 : Digital frame - Fault
11
no. 11 : Frame - rare Pulse
12
no. 12 : Recorder - 5 signals
13
no. 13 : Recorder heart
14
no. 14 : Harmonics
b)
a)
15
no. 15 : Distortion
16
Index
17, 18
METRIX Oscilloscope Demo Kit 3
Demo: with:
MTX3x5x SPO
& MTX105x SPO
OX 6000
OX 6000-II
SCOPIX
+ OXi 6204
HANDSCOPE
a) c)
Test Signal
no. 1 : Miscellaneous
Type
4 pairs of successive signals about every 2 s
Specs
2.6 V < Vpp < 3.2 V - 10 Hz < F < 60 Hz
Scope settings
20 ms/div. - MAIN = 500 mV/div. - AUX = 500 mV/div.
Trigger
standard on MAIN
Modes
XY (Display Menu) - neither “Min/max”, nor “Repetitive Signal” (Horizontal
Menu)
Purpose
Start in an entertaining way, demonstrating the following display modes:
Normal, Full Trace, Full Screen, XY
a) Calibrate the oscilloscope so it displays the signals correctly (possible using the “Autoset” mode).
Normal mode
b) Perform the Full Trace and Full Screen commands in sequence in order to avoid superimposition of traces,
then assign the full screen to the display of traces.
Full Trace Full Screen
c) Return to the initial Normal display and s with CH1 on X and CH4 on Y, or CHA in X and elect the “XY mode
CHB in Y. A sequence of geometric forms will be displayed (heart; clover; rose; spiral).
Spiral
Rose
Clover
Heart

Produktspecifikationer

Varumärke: Metrix
Kategori: Inte kategoriserad
Modell: LX1600

Behöver du hjälp?

Om du behöver hjälp med Metrix LX1600 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Metrix Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer