MIA Laboratories 413 Tape Saturator Bruksanvisning
MIA Laboratories
Programvara för ljud
413 Tape Saturator
Läs nedan 📖 manual på svenska för MIA Laboratories 413 Tape Saturator (5 sidor) i kategorin Programvara för ljud. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/5
413 TAPE SATURATOR
User Guide
MIA LABORATORIES
Greetings and Welcome!
Thank you for choosing MIA Laboratories.
Please take the time to read through this user guide in order to get familiar with the components and use of 413 Tape Saturator.
Overview
The 413 Tape Saturator reproduces the non-linear characteristics that would result when overdriving analog tape, as magnetic
saturation occurs with increasing amplitude of the ‘recorded’ signal. It offers 3 different types of Analog Tape, as well as 3 different
types of distortion.
For the saturation process, the signal gets dynamically changed, especially high frequency information, in response to its amplitude.
The resulting effect simulates the saturation of analog tape, in a controllable environment which can be adjusted according to your
preference.
The user can choose among 3 different types of Analog Tape, each corresponding to the noise and saturation characteristics of 3
different well known tape brands.
3 distortion types are also available, enabling the user to produce the harmonic content/distortion one would get by overdriving
certain Tube or Transistor circuits.
Features
● Advanced Tape Saturation algorithm
● Tube, Transistor and Soft Clipping Distortion
● Real tape-hiss
● ‘IEC on NAB’ playback equalization mode
Control functions and specifications
INPUT: Controls the level of input signal to the 413 Tape Saturator. Ranges from -48 to +6 dB.
OUTPUT: Controls the amount of output attenuation. Ranges from 0 to -48 dB.
DISTORTION: Selects the type of distortion produced. Type A and Type B simulate Tube and Transistor circuits, while Type C is
based on a soft clipping algorithm.
AMOUNT: Sets the amount of distortion that will be applied to the signal for distortion types A and B, while it acts like a dry/wet
control for Type C. Ranges from 0 to 11.
SATURATION: Sets the amount of Tape Saturation applied, ranging from 0 to 100%.
The effect and ‘depth’ of this adjustment is also affected by Tape Type, Flux Ref. and the nominal level of the signal itself.
So, the more the VU meters are driven into the red, the more saturation takes place.
TAPE: There are three different types to choose from. Each type carries its own Hiss noise and affects the saturation Depth.
HISS: Sets the amount of Hiss that will be introduced to the signal. It’s sound changes according to Tape Type.
Also note that the hiss noise is continuous and does not ‘start’ and ‘stop’ according to the DAW transport.
It will therefore be also present when signals are being monitored instead of being played-back by chanell tracks, and can be
completely turned-off by setting to 0.
EQUALIZATION:
NAB
: No change to the signal since the 413’s default state is NAB.
IEC
: Applies an approximation of the frequency response that would result if the original material was recorded in NAB and played
back with IEC eq.
FLUX REF.: Adjusts the “Flux reference” of the tape, therefore affecting the Depth of Tape Saturation, and the meters’ calibration.
Produktspecifikationer
| Varumärke: | MIA Laboratories |
| Kategori: | Programvara för ljud |
| Modell: | 413 Tape Saturator |
Behöver du hjälp?
Om du behöver hjälp med MIA Laboratories 413 Tape Saturator ställ en fråga nedan och andra användare kommer att svara dig
Programvara för ljud MIA Laboratories Manualer
20 September 2024
20 September 2024
20 September 2024
20 September 2024
20 September 2024
20 September 2024
20 September 2024
20 September 2024
20 September 2024
20 September 2024
Programvara för ljud Manualer
- Programvara för ljud Nomad
- Programvara för ljud Antares
- Programvara för ljud IK Multimedia
- Programvara för ljud Corel
- Programvara för ljud Air
- Programvara för ljud Eventide
- Programvara för ljud Steinberg
- Programvara för ljud Waves
- Programvara för ljud Magix
- Programvara för ljud Xils Lab
- Programvara för ljud Best Service
- Programvara för ljud CEDAR
- Programvara för ljud MixVibes
- Programvara för ljud Kuassa
- Programvara för ljud PSP Audioware
- Programvara för ljud SONORIS
- Programvara för ljud Audified
- Programvara för ljud Slate Digital
- Programvara för ljud Blue Cat Audio
- Programvara för ljud Overloud
- Programvara för ljud Cherry Audio
- Programvara för ljud FabFilter
- Programvara för ljud IZotope
- Programvara för ljud Metric Halo
- Programvara för ljud Audiomodern
- Programvara för ljud MeldaProduction
- Programvara för ljud Sonible
- Programvara för ljud Chocolate Audio
- Programvara för ljud Sound Particles
- Programvara för ljud Playfair Audio
- Programvara för ljud Dear Reality
- Programvara för ljud Tek'it Audio
- Programvara för ljud MAAT
- Programvara för ljud Audio Modeling
- Programvara för ljud Nugen Audio
- Programvara för ljud TAL Software
Nyaste Programvara för ljud Manualer
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024
25 September 2024