Microchip LAN8670 Bruksanvisning

Läs nedan 📖 manual på svenska för Microchip LAN8670 (48 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/48
2021-2023 Microchip Technology Inc. and its subsidiaries DS00004131D-page 1
1.0 INTRODUCTION
The LAN867x is a high-performance 10BASE-T1S single-pair Ethernet PHY transceiver that is targeted for 10 Mbit/s
half-duplex networking over a single pair of conductors.
This document guides you in creating a sample TCP/IP Client node (bare-metal or FreeRTOS™ based), using the
LAN867x PHY. It describes how to configure the PHY in either Physical Layer Collision Avoidance (PLCA) or Carrier-
Sense Multiple Access/Collision Detection (CSMA/CD) mode.
The description in this document is based on an ATSAME54P20A running on a SAM E54 Curiosity Ultra Development
Board [4]. However, it can also be applied to other infrastructures; for example, to an ATSAME70Q21B running on a
SAM E70 Xplained Ultra Evaluation Kit [5].
1.1 Audience
This document is written for developers who want to create a sample TCP/IP Client node, using the LAN867x PHY.
Developers should be familiar with the infrastructure of MPLAB
® X IDE and its plug-ins [1].
1.2 Prerequisites
The following software components are required for getting started and to configure the example described in this doc-
ument:
MPLAB X IDE
https://www.microchip.com/en-us/tools-resources/develop/mplab-x-ide
• MPLAB XC32
https://www.microchip.com/en-us/tools-resources/develop/mplab-xc-compilers
MPLAB Code Configurator (MCC)
https://www.microchip.com/en-us/tools-resources/configure/mplab-code-configurator
1.3 References
The following sources should be referenced when using this application note.
[1] MPLAB Code Configurator
https://www.microchip.com/en-us/tools-resources/configure/mplab-code-configurator
[2] MPLAB Code Configurator Getting Started
https://microchipdeveloper.com/mcc:start
[3] MPLAB XC Compiler Documentation
https://www.microchip.com/en-us/tools-resources/develop/mplab-xc-compilers/downloads-documentation#XC32
[4] SAM E54 Curiosity Ultra Development Board
https://www.microchip.com/Developmenttools/ProductDetails/DM320210
[5] SAM E70 Xplained Ultra Evaluation Kit
https://www.microchip.com/Developmenttools/ProductDetails/DM320113
AN4131
MPLAB® Harmony v3 LAN867x Driver Example
AN4131
DS00004131D-page 2 2021-2023 Microchip Technology Inc. and its subsidiaries
1.4 Abbreviations
Abbreviation Definition
CSMA/CD Carrier-Sense Multiple Access/Collision Detection
EDBG Embedded Debugger
MCC MPLAB Code Configurator
NVIC Nested Vectored Interrupt Controller
PLCA Physical Layer Collision Avoidance
2021-2023 Microchip Technology Inc. and its subsidiaries DS00004131D-page 3
AN4131
2.0 CREATE A NEW MCC HARMONY PROJECT
2.1 Create a New Project
1. Open MPLAB X IDE.
2. Create a new project by either
a) clicking the new project icon or
b) by selecting File > New Project.
3. In the “New Project” window:
a) Select “32-bit MCC Harmony Project”.
b) Click Next.

Produktspecifikationer

Varumärke: Microchip
Kategori: Inte kategoriserad
Modell: LAN8670

Behöver du hjälp?

Om du behöver hjälp med Microchip LAN8670 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Microchip Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer