Microchip SY89856U Bruksanvisning

Microchip Inte kategoriserad SY89856U

Läs nedan 📖 manual på svenska för Microchip SY89856U (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/8
2.0GHz, Low Power, 1:6 LVPECL
Fanout Buffer with 2:1 Input MUX
and Internal Termination
SY89856U Evaluation Board
MLF and MicroLeadFrame are trademarks of Amkor Technology, Inc.
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
March 2005
M9999-031505
hbwhelp@micrel.com or (408) 955-1690
General Description
The SY89856U evaluation board is designed for
convenient setup and quick evaluation of the
SY89856U. The board is optimized to interface directly
to a 50Ω oscilloscope.
For best AC performance, the board is configured in AC-
coupled In and AC-coupled Out configuration. For
applications that require a DC-coupled configuration,
step-by-step instructions for modifying the board are
included.
Features
• Fully assembled and tested SY89856U
• +2.5V or +3.3V power supply
• AC-coupled configuration for ease-of-use
• I/O interface includes on-board termination
• Fully assembled and tested
• Can be reconfigured for DC-coupling operation
Related Documentation
• SY89856U 2.0GHz, Low Power, 1:6 LVPECL
Fanout Buffer with 2:1 Input MUX and Internal
Termination Data Sheet
_______________________________________________________________________________________________________
Evaluation Board
Micrel, Inc. SY89856U Evaluation Board
March 2005
2 M9999-031505
hbwhelp@micrel.com or (408) 955-1690
Evaluation Board Description
The default configuration for the SY89856U board is
AC-coupled. The choice between AC-coupled and DC-
coupled configurations offers the user flexibility for
specific applications. With the current board layout, Q0
is meant for DC-coupled operation. In default AC-
coupled configuration, Q0 is not brought out.
AC-Coupled Evaluation Board
The AC-coupled configuration is suited to most
customer applications and is preferred by the majority of
users because of its ease-of-use. It requires only a
single power supply and offers the most flexibility in
interfacing to a variety of signal sources.
The DC-bias levels and AC-coupling capacitors are
supplied on-board for each input, making it unnecessary
to vary the offset voltage or change any components on
the board as the power supply voltage varies over the
+2.5V +5% and +3.3V +10% operating range. The user
needs only to supply a minimum input voltage swing and
the bias voltage will automatically adjust the input to the
correct level as the power supply voltage varies.
DC-Coupled Evaluation Board
For applications that are not suited to AC-coupling such
as clock applications that can be turned off for extended
periods of time, the board can be user-configured for
DC-coupled operation.
This can be accomplished by modifying the board to use
two power supplies into a “split-supply configuration”.
Since LVPECL is referenced to V
CC
, and standard PECL
termination is 50Ω to V
CC
-2V. Split-supply is an easy
method to interface to a 50Ω (to ground) scope.
Therefore, a 3.3V supply will be split into +2V and -1.3V,
and a 2.5V supply will be split into a +2V and -0.5V.
The +2V offset in this two-power supply configuration
provides the correct terminations for the device by
setting the Ground potential on the board to be exactly 2
volts below the V
CC
supply. The V
EE
voltage is then set
to –1.3V for 3.3V devices, or –0.5V for 2.5V devices to
ensure proper V
CC
to V
EE
voltage difference.
Any-Input Interface
The unique internal input termination sets the input
common mode voltage. This enables the input to
interface with any differential signal over the supply
voltage without modifying the board.
Micrel, Inc. SY89856U Evaluation Board
March 2005
3 M9999-031505
hbwhelp@micrel.com or (408) 955-1690
Evaluation Board
AC-Coupled Evaluation Board
I/O Power Supply V
CC
GND V
EE
AC-Coupled Input/AC-Coupled Output 2.5V +2.5V 0V 0V
AC-Coupled Input/AC-Coupled Output 3.3V +3.3V 0V 0V
Table 1. AC-Coupled Evaluation Board Power Supply Connections

Produktspecifikationer

Varumärke: Microchip
Kategori: Inte kategoriserad
Modell: SY89856U

Behöver du hjälp?

Om du behöver hjälp med Microchip SY89856U ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Microchip Manualer

Microchip

Microchip dsPIC33EV256GM003 Bruksanvisning

27 Oktober 2024
Microchip

Microchip SAMA5D2C-XULT Bruksanvisning

27 Oktober 2024
Microchip

Microchip MCP2120 Bruksanvisning

27 Oktober 2024
Microchip

Microchip AT89C51ED2 Bruksanvisning

27 Oktober 2024
Microchip

Microchip PIC32MX450F256H Bruksanvisning

27 Oktober 2024
Microchip

Microchip dsPIC33FJ64GP310 Bruksanvisning

27 Oktober 2024
Microchip

Microchip ATSAMDA1G14B Bruksanvisning

27 Oktober 2024
Microchip

Microchip ATSAMDA1E16B Bruksanvisning

27 Oktober 2024
Microchip

Microchip USB3336 Bruksanvisning

27 Oktober 2024
Microchip

Microchip PIC24EP64GP202 Bruksanvisning

27 Oktober 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024