Miiego MiiBLASTER Bruksanvisning

Miiego Hörlurar MiiBLASTER

Läs nedan 📖 manual på svenska för Miiego MiiBLASTER (20 sidor) i kategorin Hörlurar. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/20
Quick Start Guide
ENG
DK
NOR
SE
DE
1 - 2
3 - 4
5 - 6
7 - 8
9 - 10
FR -
1
211
- 1817PSE
- 1413 LN
EST - 6115
MiiBLASTER
WIRELESS SPEAKER
ENG
1 6
2
3
5
7
8
4
SPECIFICATIONS
CARE, MAINTENANCE, SAFETY
1
1 2 3 4 5 6
7
EQ
This device contains a lithium accumulator.
Improper use can cause erheating and fire. ov
8
Any modification of the product may have consequences for safety, warranty
and proper functioning. Keep out of reach for children and animals. Product
storage and working temperature: from -10 celsius degrees to +40. Do not
expose the product to direct sunlight, heat or naked flames as it may cause
damage or explosion. Do not use the product if a part is damaged or defective.
Replace a damaged or defective device immediately. Disconnect the product
from the electrical outlet and other equipment if problems occur. Do not
charge when the product is wet. Do not leave a battery on prolonged charge
when not in use. Do not dismantle, open or shred batteries. Do not drop the
product and avoid bumping. This product may only be serviced by a qualified
technician for maintenance to reduce the risk of electric shock etc.
Bluetooth v5.0. Rechargeable 5400 mAh Li-ion battery.
Full charging time: around 4-8 hours. IPX5.
BT frequency range: 2.402-2.480GHz. Freq. Response: 80Hz-12 KHz.
Charging input power: 5V DC/1A or 2A. RMS audio output: 2x22W. Impedance:
4 . Ω
Battery indicator - 4 LED lights
Volume up / Next song
Volume down / Previous song
Play / Pause
EQ (BASS / ROCK / POP / CLASSIC)
Mode (switch between Bluetooth, USB
and AUX-IN), Long press for TWS.
button: Power On /Off. Pairing.
USB Port, Charging port, AUX IN
ENG
2
Pairing your MiiBLASTER MIIEGO® Bluetooth speaker
Charging the MiiBLASTER speaker
Next time charging
Turning Your MiiBLASTER On and Off
Activate Siri on iOS-device: Press and hold the PLAY button for 2-3 seconds
(works only in Bluetooth mode).
Play music from USB or AUX IN mode
Pairing and connecting 2 x MiiBLASTER speakers with TWS
1: Make sure the speaker is charged and turned OFF.
2: Press and hold the button for 2 seconds until the indicator light flashes
Blue (pairing mode).
3: Activate Bluetooth on your phone or other device and search for Bluetooth
devices and select: MiiBLASTER.
When MiiBLASTER is connected the Blue light is constantly on.
The speaker will remember your phone/device and automatically reconnect
the next time you turn it on.
An unpaired speaker will automatically turn off after 6 minutes.
Use a 5V/1A or 2A USB adapter for charging.
During charging the 4 LED battery indicator lights will flash one by one. When
fully charged the lights will stay on permanently.
Full charging time is around 4-6 hours with 2A and 6-8 hours with 1A.
When the first battery LED indicator light is flashing every 5 seconds, the
battery status is low and needs charging.
You will then also hear a battery warning tone every 120 seconds.
ON: Press and hold the Button for 2 seconds until a tone is heard.
OFF: Press the Button once and a tone is heard.
Insert USB flash or AUX audio cable on the back of the speaker (in AUX mode
switching songs on +/- buttons is unavailable).
TWS only works when connecting two MiiBLASTERs by MIIEGO together. ®
1: Turn on both speakers (Bluetooth mode). Make sure they are unconnected.
2: Press and hold on one speaker for 4 seconds. The product emits a button 6
tone to indicate entering TWS-pairing mode.
3: Activate Bluetooth on your audio source and connect with the product. The
product emits three tones and lights up to indicate successful TWS-button 6
pairing.

Produktspecifikationer

Varumärke: Miiego
Kategori: Hörlurar
Modell: MiiBLASTER

Behöver du hjälp?

Om du behöver hjälp med Miiego MiiBLASTER ställ en fråga nedan och andra användare kommer att svara dig




Hörlurar Miiego Manualer

Hörlurar Manualer

Nyaste Hörlurar Manualer