Miiego MOOVE45i Bruksanvisning

Miiego Hörlurar MOOVE45i

Läs nedan 📖 manual på svenska för Miiego MOOVE45i (20 sidor) i kategorin Hörlurar. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/20

Quick Start Guide

ENG

NOR

1 - 2

3 - 4

5 - 6

7 - 8

FR -

EST 31 41-

NL 11 21-

15 17-

MOOVE i PRO45

SPECIFICATIONS

BT v5.3. Rechargeable 400 mA/h Li-ion battery.

Full charging time: around 2-3 hours.

Frequency range: 2.402-2.480GHz.

Freq. Response: 20Hz-20KHz.

CARE, MAINTENANCE, SAFETY

WARNING: Do not use while driving or where vehicular traffic is present, or in any

other activity where failure to hear your surroundings could be dangerous. Use of

these headphones at excessive volumes may cause permanent hearing damage.

Always turn the volume down before use. Keep out of reach from children and

animals. Avoid direct sunlight. Product storage and working temperatures: from

-5 degrees to +40 degrees. Do not dispose the battery in fire, as it may cause an

explosion. Any modifications to the device will void the user warranty and may

have consequences for your safety.

Pairing Your MOOVE 45i PRO by MIIEGO® Wireless Headphones

1: Make sure your are charged and turned OFFMOOVE 45i PROs

2: Press and hold the M- button on the headphones for 3 seconds until the indicator

light flashes Red and Blue alternatively (pairing mode).

3: Activate BT on your phone or other device and search for BT devices and select

MOOVE 45i PRO by MIIEGO® .

LED ca indi tor for cha ging r / pairing

Volume Up / N tex Song

Press once / Hold

M n-butto

Tu n r on headphones / off. Play / pause.

Answer call, end / reject call. Siri

Vol Dowume n / o Previ us Song

Press once / Hold

C r rtha ging po

B Mi o ui -in lt croph ne

ANC no eis cancelling / Low latency

button.

LED ca indi tor for AN C (Green=On)

ABOUT ANC – Active Noise Cancelling

The Active Noise Cancelling (ANC) function will reduce unwanted environmental

noise and deliver a clearer audio performance.

Please note:

ANC is mainly used for low frequency band noise. Even though environmental

noise is reduced, it may not be entirely eliminated and voice etc. can be heard.

Smartphones may cause interference/noise. If so, move the phone away ANC

from the headphones.

Do not press the headphones or ear cushions, when is on, as this may ANC

interfere the ANC microphone and cause high 'beep' noise.

When is ON it will consume more battery.ANC

ENG

This device contains a lithium accumulator.

Improper use can cause overheating and fire. Only listen to music in a moderate volume and

in moderate periods of time. Excessive exposure

to high sound levels can lead to noise-induced

hearing loss.

For California Residents: WARNING: This product contains

chemicals known to the State of California to cause cancer

and birth defects or other reproductive harm.

Charging Your MIIEGO Headphones

When the Red light is on, the headphones are charging.

When the Red light is off, the headphones are fully charged.

Full charging time is around 2-3 hours.

Next time charging

When you hear a warning tone of "battery low" every 180 seconds and the Red light

blinks, the battery status is low and needs charging.

Turning Your MIIEGO Headphones On and Off

ON: Press the M-Button for 3 seconds until the indicator light turns Blue.

OFF: Press the M-Button until the indicator light turns Red for 2 seconds.

Battery status with voice prompt when headphones are turned on

Battery high: 71-100%

Battery medium: 30-70%

Battery low: 0-29%

How to activate the ANC - Active Noise Cancelling function

Press Button 7 to activate Noise Cancelling On and Off

When ANC is ON the green indicator light is ON.

How to activate the Low Latency function

Double-press Button 7 to activate Low Latency On and Off.

When Low Latency is activated, you will hear a tone.

Soft reset

Make sure you delete “ ” from your phones BT-device settings before MOOVE 45i PRO

resetting.

1. When power is off, press and hold the M-button for 5 seconds until the light flashes

blue and red.

2. Press and hold both +/- buttons simultaneously for 10 seconds until you see the red

light flashing 3 times. The headphones will then power OFF automatically.

Multi-point connection (pair 2 devices):

1. Connect your FIRST device as normal. Then, turn off Bluetooth in settings on that

device. The headphones will then automatically enter pairing mode again.

2. Connect your SECOND device as normal to the headphones.

3. Then activate your FIRST device again and turn on Bluetooth. Re-connect/pair the

headphones to that device again.

Activate Siri on iOS-device:

Access Siri by pressing the M-button 2 times.

ENG

Produktspecifikationer

Varumärke:	Miiego
Kategori:	Hörlurar
Modell:	MOOVE45i

Behöver du hjälp?

Om du behöver hjälp med Miiego MOOVE45i ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Hörlurar Miiego Manualer

Miiego AXTIVE SQUARE Bruksanvisning

24 September 2024

Miiego CHARGE&PLAY MINI Bruksanvisning

24 September 2024

Miiego MOOVE45i Bruksanvisning

24 September 2024

Miiego MiiBUDS PLAY Bruksanvisning

24 September 2024

Miiego MiiBLASTER GO Bruksanvisning

24 September 2024

Miiego MOOVE35i PRO Bruksanvisning

24 September 2024

Miiego M1+ RE:DUCE Bruksanvisning

24 September 2024

Miiego MiiPARTY GO Bruksanvisning

24 September 2024

Miiego MiiPOCKET MINI Bruksanvisning

24 September 2024

Miiego MiiBLASTER XL Bruksanvisning

24 September 2024

Hörlurar Manualer

Nyaste Hörlurar Manualer

Cabstone 95108 Bruksanvisning

27 Oktober 2024

Philips TAH6206 Bruksanvisning

23 Oktober 2024

Lamax SteelClips1 ANC Bruksanvisning

23 Oktober 2024

Lamax SteelTones1 Bruksanvisning

23 Oktober 2024

Lamax SteelDots3 ANC Bruksanvisning

23 Oktober 2024

Pioneer SE-MJ722T Bruksanvisning

22 Oktober 2024

Sony LinkBuds Bruksanvisning

21 Oktober 2024

Hama 53465 Bruksanvisning

20 Oktober 2024

Sennheiser RS 170 Bruksanvisning

20 Oktober 2024

Silvercrest HS 2700BT Bruksanvisning

19 Oktober 2024