Mill SG2000LED Bruksanvisning

Mill Värmare SG2000LED

Läs nedan 📖 manual på svenska för Mill SG2000LED (10 sidor) i kategorin Värmare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/10
ASSEMBLY AND INSTRUCTION MANUAL (EN)
Please read the instrucons carefully before use. Take good care of this manual for later use.
This assembly and instrucon manual applies to the following products:
SG2000MEC, SG2000LED, SG2000GLASS
Series: Convecon
Important safety informaon
You must obey common safety guidelines when using electrical products, especially in the presence of children.
WARNING! To avoid electric shock or damage due to the heat, always make sure the plug is pulled out before the heater is moved
or cleaned.
Read the instrucons carefully.
The product is intended for home use only.
Make sure the heater is connected to the house's regular mains (230 V), as it indicated on the heater.
New heaters will produce a specic odor when used the rst me. This will stop aer a short me and is completely
harmless.
Check for any pieces of packing foam or cardboard that may have fallen into the heang elements of the heater. These
pieces must be removed in order to avoid unpleasant odors.
Prevent the heater from overheang – . do not cover
Always turn o the heater and unplug it when not used for a long me.
Pay special aenon if the heater is used in rooms where children, the handicapped or elderly reside.
The heater should not be set up directly beneath an electrical socket outlet.
The cord must not be laid under any kind of carpet. Make sure the cord is laid in such a way that nobody can trip on it.
The heater must not be used if either the cord or plug is damaged. The heater must not be used if it has been dropped on
the oor or is damaged in any other way causing it to malfuncon.
The cord must be repaired by the manufacturer or by an expert if it has been damaged, to avoid dangerous situaons.
Avoid using extension cords, which may overheat and could possibly start a re.
Never cover the air vents on the heater. Avoid potenal re hazards by making sure the air intakes are not blocked or
covered. The heater should be used in rooms with normal at oors.
The heater should not be installed in close proximity to ammable materials of any kind because there can always be a risk
of re.
The heater must never be used in rooms where gasoline, paint or other ammable liquids are stored, such as in a garage.
Never touch an electric heater with wet hands. The heater should be installed so a person showering or taking a bath
cannot come into direct contact with it.
The heater becomes hot when it is on. Therefore, be careful and avoid burning or scorching your skin.
The heater must be switched o, the plug removed and the heater must cool down before it is moved.
Avoid overloading the mains (the circuit) where the heater is connected. The heater may overload the electrical circuit if
other electrical devices are plugged into the same socket outlet.
EN 2 millheat.com
The device cannot be used by children under 8 years of age and persons with reduced physical or mental abilies or lack of
experience and knowledge unless they have been given supervision or instrucon in the safe use of the device and
understand the hazards involved.
Children should not play with the device. Cleaning and maintenance should not be done by unsupervised children.
Children under the age of 3 should be kept away from the device, unless they are under constant supervision.
Children aged 3 to 8 years are only permied to turn the device ON/OFF, assuming the device is mounted according to the
assembly instrucons and the children have received instrucon or supervision in the safe use of the device and
understand the hazards involved.
EN 3 millheat.com

Produktspecifikationer

Varumärke: Mill
Kategori: Värmare
Modell: SG2000LED

Behöver du hjälp?

Om du behöver hjälp med Mill SG2000LED ställ en fråga nedan och andra användare kommer att svara dig


Värmare Mill Manualer

Mill

Mill SG2000MEC Bruksanvisning

1 Oktober 2024
Mill

Mill CB2000 GD Bruksanvisning

29 September 2024
Mill

Mill SG2000LED Bruksanvisning

22 September 2024
Mill

Mill CB2000 BT-ULG Bruksanvisning

16 September 2024
Mill

Mill IB1000L DN Bruksanvisning

15 Augusti 2024
Mill

Mill CB3000GD Bruksanvisning

2 Augusti 2024
Mill

Mill CB1500G Bruksanvisning

1 Augusti 2024
Mill

Mill IB1200DN G Bruksanvisning

1 Augusti 2024
Mill

Mill AB-H700MINI Bruksanvisning

29 Juli 2024
Mill

Mill AB-H1500DN Bruksanvisning

27 Juli 2024

Värmare Manualer

Nyaste Värmare Manualer

Vonroc

Vonroc PH503AC Bruksanvisning

27 Oktober 2024
JANDY

JANDY VersaFlo Bruksanvisning

27 Oktober 2024
Master

Master 215TMHD-KFA Bruksanvisning

26 Oktober 2024
Yamazen

Yamazen DBC-VK123 Bruksanvisning

23 Oktober 2024
Yamazen

Yamazen DCT-B08 Bruksanvisning

23 Oktober 2024
Yamazen

Yamazen DOL-J122 Bruksanvisning

23 Oktober 2024
Yamazen

Yamazen DSF-S122 Bruksanvisning

23 Oktober 2024
Yamazen

Yamazen DBC-SK123 Bruksanvisning

23 Oktober 2024
Yamazen

Yamazen DBC-W121 Bruksanvisning

23 Oktober 2024
Yamazen

Yamazen DMF-D021 Bruksanvisning

23 Oktober 2024