Miller Arrow X5 Bruksanvisning

Miller Stativ Arrow X5

Läs nedan 📖 manual på svenska för Miller Arrow X5 (12 sidor) i kategorin Stativ. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
Fluid Head
OPERATOR’S
MANUAL
1072
Arrowx
3
Fluid Head
1074
Arrowx
5
Fluid Head
1076
Arrowx
7
Fluid Head
Tripod Bowl
1
Features and Controls
Pan Handle Clamp
Pan Handle
Sliding Platform Lock
Illumination Button
Bubble Level
Threaded Stud
Camera Screws
Pan Drag Control
Tilt Drag Control
Safety Tab
Quick Release Knob
Sliding Platform Camera Plate
Tilt Lock Counterbalance
Selector
Clamp Nut
Fig. 1 Fig. 2
Pan Lock
CB Plus Selector Knob
2
Thank you for purchasing the Arrow
x
Fluid Head. The Arrow
x
Fluid Head has been designed to suit a wide range of cameras,
lenses and accessories as demanded by ENG, EFP, Studio and
Field OB setups.
The robust design and construction of the Arrow
x
Fluid Head
offers maximum stability, accuracy and durability and includes
precision ball bearing mounted Fluid Drag Plate system in the
Pan and Tilt assembly to deliver trueuid drag performance over
the entire temperature and payload range.
The Fluid Drag and the Counterbalance system were designed to
provide excellent control and repeatability and offer progressive
equal increments of drag and torque.
The Arrow
x
Fluid Head also offers Illuminated single control
location for operating Pan-tilt, Counterbalance and viewing
Bubble level.
The Arrow
x
Fluid Head will give best performance when used
on a wide range of Miller tripods, including SOLO ENG (#1505),
Sprinter II (#1589, #1580, #1576) and HD (#931) tripod. This will
ensure maximum system stability to suit any professional set-
up. The Arrow
x
Fluid Head will suit most industry standard 100
mm tripods as well, please refer to manufacturesmanual for
mounting details.
Introduction Safety Instructions
Attaching / removing the camera
Please use this manual to familiarise yourself with the operation
of the Arrow
x
Fluid Head and observe these instructions
to prevent any damage to your equipment. Ensure that all
equipment is operating correctly and free from defects and
damage, also please ensure that the tripod is steady, secure and
that the bowl is approximately horizontal when attaching the
camera. The operator is responsible for the safe operation of this
piece of equipment.
Do not exceed the maximum payload capacity of the Fluid
Head.
Do not leave the camera unattended on the Fluid Head.
Do not release the SLIDING PLATFORM LOCK whilst the
camera is at an angle.
Do not adjust the tripod whilst the camera is attached to the
Fluid Head.
Ensure PAN HANDLE CLAMP and CLAMP NUT is securely
tightened.
Apply TILT LOCK when adding/removing equipment from
the camera or when attaching/removing the camera from the
Fluid Head.
Hold camera securely whilst changing Counterbalance, Pan
Drag or Tilt Drag settings.
Hold the camera securely whilst releasing the QUICK
RELEASE KNOB.
Hold camera securely whilst adjusting the CLAMP NUT to
level the Fluid Head.

Produktspecifikationer

Varumärke: Miller
Kategori: Stativ
Modell: Arrow X5

Behöver du hjälp?

Om du behöver hjälp med Miller Arrow X5 ställ en fråga nedan och andra användare kommer att svara dig




Stativ Miller Manualer

Stativ Manualer

Nyaste Stativ Manualer