Milwaukee 48-22-8557 Bruksanvisning

Milwaukee Garderob 48-22-8557

Läs nedan 📖 manual på svenska för Milwaukee 48-22-8557 (20 sidor) i kategorin Garderob. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/20
Cat. No. / No de cat.
48-22-8556, 48-22-8557, 48-22-8558
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Este manual se aplica a los modelos anteriores (puede venderse por separado)
56" HIGH CAPACITY STEEL STORAGE CHEST &
56" HIGH CAPACITY STEEL STORAGE CABINET
COFFRE DE RANGEMENT EN ACIER GRANDE CAPACITÉ DE
1,42 m (56") ET CABINET DE RANGEMENT EN ACIER GRANDE
CAPACITÉ DE 1,42 m (56")
CAJA DE ALMACENAMIENTO DE ACERO DE GRAN CAPACIDAD
DE 1,42 m (56") Y GABINETE DE ALMACENAMIENTO DE ACERO
DE GRAN CAPACIDAD DE 1,42 m (56")
2
IMPORTANT SAFETY INSRUCTIONS
WARNING
READ ALL SAFETY WARNINGS
AND ALL INSTRUCTIONS. Failure
to follow the warnings and instructions may re-
sult in serious injury. Save all warnings and in-
structions for future reference.
WORK AREA SAFETY
• -Use the chest/cabinet and accessories in accor
dance with these instructions and in the manner
intended, taking into account the working conditions.
Use of the chest/cabinet for operations dierent from
those intended could result in a hazardous situation.
•Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Fully assemble the chest/cabinet according to the
assembly instructions. Do not leave o any pieces.
Chest must be fastened by screws through
connectors after it has been placed on top of cabinet.
Do not modify the chest/cabinet in any way. Use
only specically recommended accessories. Drilling
holes or modifying the chest/cabinet will lower the
load capacity, which can cause the chest/cabinet to
collapse, resulting in injury.
Lock wheels when chest/cabinet is not being
moved. Unlocked wheels can allow the chest/cabinet
to move unexpectedly.
•Keep the chest/cabinet on a level surface. Do not
load, unload, or park chest/cabinet on an incline.
The chest/cabinet may become unbalanced and tip,
resulting in injury.
Always balance the chest/cabinet load to avoid
tipping. Unbalanced chests/cabinets are more likely
to tip when being moved or when using the chest/
cabinet work surfaces. Evenly distribute the weight
front to back and side to side. Place more than half
the total load weight on the bottom cabinet when pos-
sible. To help prevent the chest/cabinet from tipping,
load the product starting with the bottom drawers.
Do not exceed the maximum product weight,
including contents. Do not exceed the maximum
weight for each drawer. Overloaded chests/cabinets
can tip, collapse, or damage drawer slides.
Do not open more than one drawer at a time. Chest/
cabinet may tip, causing injury.
Keep children and bystanders away while loading,
unloading, and moving chest/cabinet. Distractions
can cause you to lose control.
Only lift the chest/cabinet according to the instruc-
tions in this manual. Never lift by the side handle.
Other methods may be dangerous, resulting in injury.
Only transport the chest/cabinet when empty.
Properly secure when transporting.
Do not mount the chest/cabinet on a truck bed or
any other moving object.
Lock both the lid and all drawers before rolling the
chest/cabinet. The drawers could come open and
make the chest/cabinet unstable and tip.
Only roll the chest/cabinet short distances by using
the handle provided.
Secure all items before rolling the chest/cabinet.
Loose items could shift, causing the chest/cabinet to
become unstable.
Do not use drawers as steps. Do not stand on the
chest/cabinet. Chest/cabinet will tip, causing injury.
Be careful when closing the chest top cover. Remove
hands before closing the top cover.
• -Do not use chest/cabinet in explosive atmo
spheres, such as in the presence of ammable liquids,
gases or dust. This equipment has internal arcing or
sparking parts. Chest/cabinet should not be located in
a recessed area or below oor level.
Chest/cabinet plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earth (grounded) chest/cabinet power
strips. Unmodied plugs and matching outlets will
reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Maintain chest/cabinet. Check for misalignment or
binding wheels, breakage or bending of drawer slides
or other parts and any other condition that may aect
the chest/cabinet's operation. Do not use damaged
chest/cabinet.
Maintain labels and nameplates. These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
Have your chest/cabinet serviced by a qualied
repair person using only identical replacement
parts. Visit a local authorized service center for re-
pairs. Components, such as the power strip, are not
user replaceable. This will ensure that the safety of the
chest/cabinet is maintained.
WARNING
Chemical Burn Hazard.
This device contains a
lithium button/coin cell battery. A new
or used battery can cause severe
internal burns and lead to death in as
little as 2 hours if swallowed or enters the body.
Always secure the battery cover. If it does not
close securely, stop using the device, remove
the batteries, and keep it away from children. If
you think batteries may have been swallowed
or entered the body, seek immediate medical
attention.
Federal Communications Commission
WARNING:
Changes or modifications to this unit
not expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a par-
ticular installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV techni-
cian for help.
3
SPECIFICATIONS
Two-slide drawer capacity 150 lbs. (68.0 kg) ...........
Four-slide drawer capacity 300 lbs. (136.0 kg) ........
Total capacity 3000 lbs. (1360.8 kg) .........................
AC input volts 120 ....................................................
Hertz 60 ....................................................................
Watts 1875 ...............................................................
Recommended Ambient Operating
Temperature 0°F to 104°F (-18°C 40°C) ........... to
FUNCTIONAL DESCRIPTION
1
15
4
14
9
6
1. Top chest
2. Utility hook
3. Chest mat
4. Tool hanger
5. Cabinet mat
6. Bottle opener
7. Cabinet corner
extrusion
8. Digital lock*
9. Front bumper
10. Rigid caster
11. Rolling cabinet
12. Tool organizer
13. Drawer slide
14. Swivel caster
with brake
15. Shelf hinge bracket
16. Storage shelf
2
3
20
5
23
8
27
17. Rear bumper
18. Charger mounts
19. Power strip
(14 AWG, 1.8 m)
20. Cord storage
bracket
21. Side handle
22.Grommet
23. Bracket
24. Paper towel holder
bracket
25. Paper towel holder
rod
26. Chest corner
extrusion
27. Gas lift strut
10
18
16
13
19
21
24
25
17
7
26
12
*See digital lock user manual for assembly and
operation instructions.
22
11
SYMBOLOGY
Warning
Read Operator's Manual
Electrical Shock Hazard
Do not open more than one drawer at a
time. Chest/cabinet may tip, causing injury.
Be careful when closing the chest top
cover. Remove hands before closing
the cover.
Chest must be fastened by screws
through connectors after it has been
placed on top of cabinet.
Lock wheels when chest/cabinet is not
being moved. Unlocked wheels can
allow the chest/cabinet to move
unexpectedly.
Do not use drawers as steps. Chest/
cabinet may tip, causing injury.
FPO
Lock both the lid and all drawers before
moving the chest/cabinet.
GROUNDING
WARNING
Improperly connecting the ground-
ing wire can result in the risk of
electric shock. Check with a qualied electrician
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug pro-
vided with the chest/cabinet. Never remove the
grounding prong from the plug. Do not use the
chest/cabinet if the cord or plug is damaged. If
damaged, have it repaired before use. If the plug
will not t the outlet, have a proper outlet installed
by a qualied electrician.
Chests/Cabinets with Three Prong Plugs
Chests/cabinets marked “Grounding Required
have a power strip with a three wire cord and three
prong grounding plug. The plug must be connected
to a properly grounded outlet (See Figure A). If the
power strip should electrically malfunction or break
down, grounding provides a low resistance path to
carry electricity away from the user, reducing the risk
of electric shock.
The grounding prong in the plug is connected through
the green wire inside the cord to the grounding sys-
tem in the power strip. The green wire in the cord
must be the only wire connected to the power strip's
grounding system and must never be attached to an
electrically “live” terminal.
Your power strip must be plugged into
Fig. A
an appropriate outlet, properly in-
stalled and grounded in accordance
with all codes and ordinances. The
plug and outlet should look like those
in Figure A.

Produktspecifikationer

Varumärke: Milwaukee
Kategori: Garderob
Modell: 48-22-8557

Behöver du hjälp?

Om du behöver hjälp med Milwaukee 48-22-8557 ställ en fråga nedan och andra användare kommer att svara dig