Monitor Audio CB5 Bruksanvisning

Läs nedan 📖 manual på svenska för Monitor Audio CB5 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Pre-Construction Bracket Installation Instructions.
The following product is meant solely for the purpose described and the installation should be carried out by qualied personnel only.
The Monitor Audio pre-construction brackets are designed with the professional installers in mind. They will provide a quick and easy way of locating
the desired position of the Monitor Audio custom install loudspeakers.
Staple wings to
studs here
Staple wings to
joists here
Pre-construction bracket
Pre-construction
bracket
Wings
Wings
Studs
Joists
In Wall
In Ceiling
Dry Wall to
inner edge of
bracket
Dry Wall to
inner edge of
bracket
Pre-Construction Bracket Installations Steps:
1. Decide location of speaker (s).
2. Clip xing wings into place in convenient location around the polymer frame to suit the joists.
NOTE: Ensure the clips of the wings are xed securely. There should be no gap around the outside of the wing where it joins the bracket. If
there is a gap, this is a sure sign one of the clips is not in correctly.
3. Staple xing wings to joists/ studs. Ensure the Monitor Audio and colour text on the wings face away from you when fastening.
4. Cable tie/ zip tie the speaker cable to the loop provided inside the moulding. Snap the loop o when installing speaker.
5. Fix plaster board/ dry wall.
6. Cut hole using INNER DO NOT CUT TO THE OUTER EDGES OF THE BRACKET.edges as cutting reference.
Alternative xing arrangements are possible:
© Monitor Audio 2017. rev3

Produktspecifikationer

Varumärke: Monitor Audio
Kategori: Inte kategoriserad
Modell: CB5

Behöver du hjälp?

Om du behöver hjälp med Monitor Audio CB5 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Monitor Audio Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer