Motorola HDT100 Bruksanvisning
Motorola
Digitala avkodare tuners
HDT100
Läs nedan 📖 manual på svenska för Motorola HDT100 (48 sidor) i kategorin Digitala avkodare tuners. Denna guide var användbar för 16 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/48
UserGuide
HDT100
HighDefinition
Tuner
POWER SIGNALLOSS
POWER
ENTER
MENU
EXIT
IMPORTANT SAFETY INSTRUCTIONS
1 Read instructions
All the safety and operating instructions should be read before the appliance is operated.
2 Retain instructions
The safety and operating instructions should be retained for future reference.
3 Heed warnings
All warnings on the appliance and in the operating instructions should be adhered to.
4 Follow instructions
All operating and use instructions should be followed.
5 Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
6 Attachments
Do not use attachments not recommended as they may cause hazard.
7 Water and moisture
Do not use this equipment near water; for example, near a bathtub, wash bowl, kitchen sink, or
laundry-tub, in a wet basement, or near a swimming pool, and the like.
8 Accessories
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall
causing serious injury and serious damage to the appliance. Use only with a cart, stand, tripod,
bracket, or table recommended by the manufacturer, or sold with the equipment. Any mounting of
the appliance should follow the manufacturer’s instructions, and should use a mounting accessory
recommended by the manufacturer.
9 Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the equipment and to protect it from overheating. The openings should never be blocked by
placing the product on a bed, sofa, rug, or similar surface. Equipment should never be placed near
or over a radiator or heat register, or in a built-in installation such as a bookcase or rack unless
proper ventilation is provided.
10 Power sources
This product should be operated only from the type of power sources indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your local power
company. For equipment intended to operate from battery power, or other sources, refer to the
operating instructions.
11 Ground or polarization
This equipment may be equipped with a polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
This equipment may be equipped with a 3-wire grounding-type plug, a plug having a third
(grounding) pin. This pin will only fit into a grounding-type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding-type plug.
12 Power cord protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance
IMPORTANT SAFETY INSTRUCTIONS
13 Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the equipment, be sure the antenna or cable
system is grounded as to provide some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode.
14 Lightning
For added protection for this equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the video product due to lightning and power line surges.
15 Power lines
An outside antenna system should not be located in the vicinity of overhead power lines or where it
can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits, as contact with them may be
fatal.
16 Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or electrical
shock.
17 Object and liquid entry
Never push objects of any kind into this equipment through openings, as they may touch
dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill
liquid of any kind on the product.
18 Servicing
Do not attempt to service this equipment yourself, as opening or removing covers may expose you
to dangerous voltage or other hazards, refer all servicing to qualified service personnel.
19 Damage requiring service
Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
~= When the power supply cord or plug is damaged.
Ä= If the equipment has been exposed to rain or water.
Å= If liquid has been spilled, or objects have fallen into the equipment.
Ç= If the equipment does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions, as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualified
technician to restore the equipment to its normal operation.
É= If the equipment has been dropped or cabinet has been damaged.
Ñ= When the equipment exhibits a distinct change in performance, indicating a need for service.
20 Replacement parts
When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
21 Safety check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine that the product is in proper operational condition.
Produktspecifikationer
| Varumärke: | Motorola |
| Kategori: | Digitala avkodare tuners |
| Modell: | HDT100 |
Behöver du hjälp?
Om du behöver hjälp med Motorola HDT100 ställ en fråga nedan och andra användare kommer att svara dig
Digitala avkodare tuners Motorola Manualer
21 Juli 2024
21 Juli 2024
19 Juli 2024
Digitala avkodare tuners Manualer
- Digitala avkodare tuners Nokia
- Digitala avkodare tuners Strong
- Digitala avkodare tuners Belgacom
- Digitala avkodare tuners Kathrein
- Digitala avkodare tuners Topfield
- Digitala avkodare tuners Telenet
- Digitala avkodare tuners Metronic
- Digitala avkodare tuners Smart
- Digitala avkodare tuners Mvision
- Digitala avkodare tuners Aston
- Digitala avkodare tuners Sky Vision
- Digitala avkodare tuners Finepass
- Digitala avkodare tuners Inverto
- Digitala avkodare tuners Opentel
- Digitala avkodare tuners Selfsat
- Digitala avkodare tuners Vantage
- Digitala avkodare tuners Dream
- Digitala avkodare tuners SetOne
- Digitala avkodare tuners Technomate
- Digitala avkodare tuners Lyngbox
Nyaste Digitala avkodare tuners Manualer
27 Oktober 2024
19 Oktober 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024
15 September 2024