Motu 24I Bruksanvisning

Motu DJ-utrustning 24I

Läs nedan 📖 manual på svenska för Motu 24I (70 sidor) i kategorin DJ-utrustning. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/70

™

Mark of the Unicorn, Inc.

1280 Massachusetts Avenue

Cambridge, MA 02138

Business voice: (617) 576-2760

Business fax: (617) 576-3609

Tech support fax: (617) 354-3068

Tech support email: techsupport@motu.com

Web site: http://www.motu.com

MOTU 24i

User’s Guide for Macintosh

SAFETY PRECAUTIONS AND ELECTRICAL REQUIREMENTS

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR OTHER MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

WARNING: DO NOT PERMIT FINGERS TO TOUCH THE TERMINALS OF PLUGS WHEN INSTALLING OR REMOVING THE PLUG TO OR FROM THE OUTLET.

WARNING: IF NOT PROPERLY GROUNDED THE 24i audio interface COULD CAUSE AN ELECTRICAL SHOCK.

The 24i audio interface is equipped with a three-conductor cord and grounding type plug which has a grounding prong, approved by Underwriters' Laboratories and the Canadian Standards

Association. This plug requires a mating three-conductor grounded type outlet as shown in Figure A below.

If the outlet you are planning to use for the 24i audio interface is of the two prong type, DO NOT REMOVE OR ALTER THE GROUNDING PRONG IN ANY MANNER. Use an adapter as shown below

and always connect the grounding lug to a known ground. It is recommended that you have a qualiﬁed electrician replace the TWO prong outlet with a properly grounded THREE prong outlet. An

adapter as illustrated below in Figure B is available for connecting plugs to two-prong receptacles.

WARNING: THE GREEN GROUNDING LUG EXTENDING FROM THE ADAPTER MUST BE CONNECTED TO A PERMANENT GROUND SUCH AS TO A

PROPERLY GROUNDED OUTLET BOX. NOT ALL OUTLET BOXES ARE PROPERLY GROUNDED.

If you are not sure that your outlet box is properly grounded, have it checked by a qualiﬁed electrician. NOTE: The adapter illustrated is for use only if you already have a properly grounded two-prong

receptacle. Adapter is not allowed in Canada by the Canadian Electrical Code. Use only three wire extension cords which have three-prong grounding type plugs and three-prong receptacles which

will accept the 24i audio interface plug.

IMPORTANT SAFEGUARDS

1. Read instructions - All the safety and operating instructions should be read before operating the 24i audio interface.

2. Retain instructions - The safety instructions and owner's manual should be retained for future reference.

3. Heed Warnings - All warnings on the 24i audio interface and in the owner's manual should be adhered to.

4. Follow Instructions - All operating and use instructions should be followed.

5. Cleaning - Unplug the 24i audio interface from the computer before cleaning and use a damp cloth. Do not use liquid or aerosol cleaners.

6. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of ﬁre or electrical shock.

7. Power Sources - This 24i audio interface should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your location, consult your local power company.

8. Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords and plugs, convenience receptacles, and

the point where they exit from the 24i audio interface.

9. Lightning - For added protection for the 24i audio interface during a lightning storm, unplug it from the wall outlet. This will prevent damage to the 24i audio interface due to lightning and power line surges.

10. Servicing - Do not attempt to service this 24i audio interface yourself as opening or removing covers will expose you to dangerous voltage and other hazards. Refer all servicing to qualiﬁed service personnel.

11. Damage Requiring Service - Unplug the 24i audio interface from the computer and refer servicing to qualiﬁed service personnel under the following conditions.

a. When the power supply cord or plug is damaged.

b. If liquid has been spilled or objects have fallen into the 24i audio interface.

c. If the 24i audio interface has been exposed to rain or water.

d. If the 24i audio interface does not operate normally by following the operating instructions in the owner's manual.

e. If the 24i audio interface has been dropped or the cabinet has been damaged.

f. When the 24i audio interface exhibits a distinct change in performance, this indicates a need for service.

12. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts speciﬁed by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions

may result in ﬁre, electric shock or other hazards.

13. Safety Check - Upon completion of any service or repairs to this 24i audio interface, ask the service technician to perform safety checks to determine that the product is in safe operating conditions.

ENVIRONMENT

Operating Temperature: 10°C to 40°C (50°F to 104°)

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands. Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

INPUT

Line Voltage: 100 - 120 volts AC, RMS (US and Japan) or 220 - 250 volts AC, RMS (Europe). Frequency: 47 - 63 Hz single phase. Power: 7 watts maximum.

CAUTION: DANGER OF EXPLOSION IF BATTERY IS REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BYMANUFAC-

TURER. DISPOSE OF USED BATTERY ACCORDING TO MANUFACTURER’S INSTRUCTIONS.

3-prong plug

Grounding prong

Properly grounded 3-prong outlet

Grounding lug

Screw

3-prong plug

Adapter

Make sure this is connected

to a known ground.

Two-prong receptacle

Figure A Figure B

III

Contents

5Quick Reference: 24i I/O Front Panel

6Quick Reference: 24i I/O Rear Panel

7Quick Reference: PCI-324 Audio Card

9Quick Reference: 24i Expansion I/O

11 Quick Reference: MOTU 324 Console Window

13 About the 24i

17 Core System Packing List and

Macintosh System Requirements

19 Installing the 24i Hardware

27 Installing the 24i Macintosh Software

31 MOTU 324 Console Window

39 Using the 24i with Digital Performer

43 Using the 24i with AudioDesk

47 Using the 24i with Cubase VST

51 Sound Manager

57 Expanding Your 24i System

61 Reducing Latency

67 Troubleshooting

Produktspecifikationer

Varumärke:	Motu
Kategori:	DJ-utrustning
Modell:	24I
Färg på produkten:	Meerkleurig
Bredd:	171 mm
Djup:	70 mm
Höjd:	59 mm
Snäll:	Model Railways Parts & Accessories
Instruktioner:	Ja
Rekommenderad ålder (min):	- jaar
Material:	Kunststof
Varumärkeskompatibilitet:	Faller
Föreslaget kön:	Jongen/meisje
Antal bitar:	53 stuk(s)
Typ produkt:	Huis