Mount-It! MI-709 Bruksanvisning

Läs nedan 📖 manual på svenska för Mount-It! MI-709 (7 sidor) i kategorin Platt panelstöd. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
English
1
Installation Instruction
UNPACKING INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
Carefully open the carton, remove contents and lay out on cardboard or other protective
surface to avoid damage.
Check package contents against the Supplied Parts List in the next page to assure that all
components were received undamaged. Do not use damaged or defective parts.
Carefully read all instructions before attempting installation.
Install and operate this device with care. Please read this instruction before installation, and
carefully follow all instructions contained herein. Use proper safety equipment during installa-
tion.
Please call a qualied installation contractor for help if you don't understand these directions or
have any doubts about the safety of the installation.
Do not use this product for any purpose or in any conguration not explicitly specied in this
instruction. We hereby disclaims any and all liability for injury or damage arising from incorrect
assembly, incorrect mounting, or incorrect use of this product.
2
Supplied Parts List
(2)Adapter-n1(1)Wire Clip-m (2)Adapter-n2 (8)M4x10 Bolt-o
(4)M4 Spacer-w(4)M4x30 Bolt-t
(1)Allen Key-y (1)Wrench-z
(1)Support Plate-f(1)M10 Bolt-e (1)M10 Washer-g (1)Spring Washer-h
(1)“C” Clamp-b
(1)Pole-a (1)“C” Clamp Brace-c (1)Monitor Arm-d
(3)M5x14 Bolt-j
(1)Grommet Base
Plate-i (2)M8x12 Bolt-k (1)VESA Plate-l
(8)M4 Nut-q(12)M4 Washer-p (1)M4X6 Bolt-r (4)M4X12 Thumb Bolt-s
(4)M6x20 Bolt-u (4)M8x20 Bolt-v
(4)M6/M8 Spacer-x
3
Install the Pole to the Desktop
Step 1
1. Install the “C -Clamp Brace (c) to the Pole (a)
using 3pcs M5x14 Bolts (j), and tighten using
the Allen Key (y), see Figure 1.
2. Install the “C” -Clamp (b) to the pole assembly
according to the thickness of the desktop. The
thickness can be changed to three positions.
Connect it using 2pcs M8x12 Bolts (k), and
tighten using the Allen Key (y). Tighten the
C -Clamp to the desktop using the plastic
knob, see Figure 2.
If the existing grommet hole comes with a plas-
tic protector, remove it to ensure a at surface
before installing the desk mount.
1. Install the Grommet Base Plate (i) to the Pole
(a) using 3pcs M5x14 Bolts (j), and tighten using
the Allen Key (y), see Figure 3.
2. Position the Pole (a) on the mounting surface
and secure using the Support Plate (f ), M10
Washer (g), Spring Washer (h) and M10 Bolt (e).
Fasten the M10 Bolt using provided Wrench (z),
see Figure 4.
Option A: Desk Clamp Install a
Figure 1
c
j
Figure 2
k
v
b
Plastic Knob
a
Figure 3
i
j
Figure 4
f
e
g
h
Option B: Grommet Base Install
Existing Grommet Hole Installation

Produktspecifikationer

Varumärke: Mount-It!
Kategori: Platt panelstöd
Modell: MI-709

Behöver du hjälp?

Om du behöver hjälp med Mount-It! MI-709 ställ en fråga nedan och andra användare kommer att svara dig




Platt panelstöd Mount-It! Manualer

Platt panelstöd Manualer

Nyaste Platt panelstöd Manualer