Moxa MGate MB3270I-T Bruksanvisning

Moxa Inte kategoriserad MGate MB3270I-T

Läs nedan 📖 manual på svenska för Moxa MGate MB3270I-T (7 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
P/N: 1802031700017
*1802031700017*
MGate MB3170/MB3270 Series
Quick Installation Guide
Vers 20ion January 8.2, 21
Technical Support Contact Information
www.moxa.com/support
2 . A 20 1 Moxa Inc ll rights reserved.
- - 2
Overview
The MGate MB3170 and MB3270 are 1 and 2- port advanced Modbus
gateways that convert between Modbus TCP and Modbus ASCII/RTU
protocols. They can be used to allow Ethernet masters to control serial
slaves, or to allow serial masters to control Ethernet slaves. Up to 32 TCP
masters and slaves can be connected simultaneously. The MGate MB3170
and MB3270 can connect up to 31 or 62 Modbus RTU/ASCII slaves,
respectively.
Package Checklist
Before installing the MGate MB3170 or MB3270, verify that the package
contains the following items:
2 MGate MB3170 or MB3 70 Modbus gateway
i g Quick nstallation uide (printed)
W arranty card
Optional Accessories:
- DK-35A: DIN rail mounting kit (35 mm)
Mini DB9F- -to TB Adaptor: DB9 female to terminal block adapter
- DR-4524: 45W/2A DIN rail 24 VDC power supply with universal 85
to 264 VAC input
- DR- -75 24: 75W/3.2A DIN rail 24 VDC power supply with universal
85 to 264 VAC input
- DR- -120 24: 120W/5A DIN rail 24 VDC power supply with 88 to 132
VAC/176 to 264 VAC input by switch
NOTE
Please notify your sales representative if any of the above items
is missing or damaged.
Hardware Introduction
LED Indicators
Name
Color
Function
PWR1
Red
Power is being supplied to the power input
PWR2
Red
Power is being supplied to the power input
RDY
Red
Steady: Power is on and the unit is booting up
Blinking: IP conflict, DHCP or BOOTP server did not
respond properly, or a relay output occurred
Green
Steady: Power is on and the unit is functioning
normally
Blinking: Unit is responding to locate function
Off
Power is off or power error condition exists
Ethernet
Amber
10 Mbps Ethernet connection
Green
100 Mbps Ethernet connection
Off
Ethernet cable is disconnected or has a short
P1 , P2
Amber
Serial port is receiving data
Green
Serial port is transmitting data
Off
Serial port is not transmitting or receiving data
FX Amber
Steady on: Ethernet fiber connection, but port is
idle.
Blinking: Fiber port is transmitting or receiving
data.
Off
Fiber port is not transmitting or receiving data.
- - 3
Reset Button
Press the Reset button continuously for 5 sec to load factory defaults:
The reset button is used to load factory defaults. Use a pointed object
such as a straightened paper clip to hold the reset button down for five
seconds. Release the reset button when the Ready LED stops blinking.
Panel Layouts
The MGate MB3170 has a male DB9 port and a terminal block for
connecting to serial devices. The MGate MB3270 has two DB9 connectors
for connecting to serial devices.

Produktspecifikationer

Varumärke: Moxa
Kategori: Inte kategoriserad
Modell: MGate MB3270I-T

Behöver du hjälp?

Om du behöver hjälp med Moxa MGate MB3270I-T ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Moxa Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer