Moxa UPort 1450I Bruksanvisning

Moxa Inte kategoriserad UPort 1450I

Läs nedan 📖 manual på svenska för Moxa UPort 1450I (7 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/7
P/N: 180201400001A
*180201400001A*
UPort 1200/1400/1600 Series
Quick Installation Guide
USB- -to Serial Converter
Version 9.2, May 21 20
Technical Support Contact Information
www.moxa.com/support
2 . A 20 1 Moxa Inc ll rights reserved.
- - 2
Overview
Moxa’s USB- -to serial product provides a wide range of easy- -to use
solutions for adding Windows COM ports and Linux tty ports through a
PC’s USB port.
The UPort 1200/1400/1600 series are the following models:
- - UPort 1250: 2 port RS 232/422/485 USB- -to serial converter
UPort 1250I: 2 232/422/485 USB- -port RS - -to serial converter w/
isolation protection
UPort 1410: 4 232 USB- -port RS - - to serial converter
UPort 1450: 4 232/422/485 USB- -port RS - -to serial converter
UPort 1450I: 232/422/485 USB 4- -port RS - -to serial converter w/
isolation protection
UPort 1610 232 USB- - -8: 8 port RS - -to serial converter
UPort 1650 232/422/485 USB- - -8: 8 port RS - -to serial converter
UPort 1610 16: 16- -port RS-232 USB- -to serial converter
UPort 1650 16: 16- -p -ort RS 232/422/485 USB- -to serial converter
Before connecting UPort USB-to-serial converters to your computers
USB port, we recommend installing the UPort driver first. To do this,
follow the installation procedure described in the “Installing the UPort
1200/1400/1600 Driver” section below. The installation procedure was
done on a PC running a Windows platform. UPort converters can be
connected to any upstream type A USB port that is on the PC host or on
an upstream hub. UPort converters are hot pluggable, and therefore
there is no need to power down your computer prior to installation.
After installing the driver, connect the UPort to an upstream host or
hub. The Found New Hardware wizard will locate the appropriate
drivers automatically. Once the drivers are found, various windows will
pop up as the UPort’s serial port is being installed. When the Found
New Hardware Wizard finishes installing the UPort, use the operating
system’s Device Manager to check and/or modify the port settings.
The new COM port will . be listed under Ports (COM & LPT)
Ordering Information
Package Checklist
Before installing the UPort, verify that the package contains the
following items:
1 UPort 1200/1400/1600 USB- -to serial converter
USB cable: CBL-USBA/B-100
100 to 240 VAC power adapter (excluding T models, UPort
1250/1410)
1 power cord suitable for your region (excluding T models, UPort
1250/1410)
1 serial adapter: mini DB9F- -to TB (excluding UPort 1410/1610
series)
- WK- -44 01: 19” rackmount L brackets (2 L shaped plates with 8
screws; for UPort 1600- 16 series)
Quick installation guide (printed)
Warranty card
NOTE
Notify your sales representative if any of the above items is
missing or damaged.
- - 3
NOTE
The operating temperature of the power adapter in the box is
from 0 to 40°C. If
your application is not in this range, please
use a power adapter supplied by UL Listed External Power
Supply (
the power output meets SELV and LPS and is rated 12
to 48 VDC, the minimum current is 92.4 mA).
WARNING
1. This unit is not intended for consumer use. It will only be
shipped to manufacturers or factories.
2. The DC source should come from a class external adapter
or a 12 to 48 VDC safety extra-low voltage (SELV) limited
power source (LPS), using a transfer device.
3. This unit should be installed or set up by a qualified
service person.
Refer to the table below to see whether external power is needed for
your UPort. If applicable, connect the UPort to an external power
source.
UPort
1250I
UPort
1400
UPort
1600-8
UPort
1600 16-
Bus Power
External
Power
(adapter)

External
Power (cord)
Power Input Specifications
UPort 1250
5 VDC (bus power), 360 mA
UPort 1250I
12 to 48 VDC, 200 mA (max. in 12 VDC)
UPort 1410/1450
12 to 48 VDC (external) or 5 VDC (bus power), 260
mA (max. in 12 VDC)
UPort 1450I
12 to 48 VDC, 360 mA (max. in 12 VDC)
UPort 1600-8
12 to 48 VDC, 340 mA (max. in 12 VDC)
UPort 1600-16
100 to 240 VAC, 0 mA (max. in 100 VAC)15

Produktspecifikationer

Varumärke: Moxa
Kategori: Inte kategoriserad
Modell: UPort 1450I

Behöver du hjälp?

Om du behöver hjälp med Moxa UPort 1450I ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Moxa Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer