Moxa Nport 5610-8-DTL Bruksanvisning
Läs nedan 📖 manual på svenska för Moxa Nport 5610-8-DTL (2 sidor) i kategorin Server. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
– – – – – – 1 2 3
P/N: 1802056000010
NPort 5600-8- DTL
Quick Installation Guide
First Edition, March 2011
Overview
The NPort 5600-8- DTL series includes the following models:
• NPort 5610-8-DTL: 8 ports, RS-232, 0 to 60°C
• NPort 5650-8-DTL: 8 ports, RS-232/422/485, 0 to 60°C
• NPort 5650I-8-DTL: 8 ports, RS-232/422/485, 0 to 60°C,
2KV optical isolation.
• NPort 5610-8- -DTL T: - - 8 ports, RS 232, 40 to 75°C
• NPort 5650-8- -DTL T: 8 ports, RS-232/422/485, - 40 to 75°C
• NPort 5650I-8- -DTL T: -8 ports, RS 232/422/485, 2KV
optical isolation, -40 to 75°C
Package Checklist
The NPort 5600-8- DTL package should contain the following items:
• NPort 5600-8-DTL device server
• Wall mounting and DIN- Rail kits
• Stick- on pads
• Documentation and software CD
• Quick installation guide (printed)
• Warranty card
Optional Accessories*
• DK-35A: DIN-R ail mounting kit (35 mm)
Note: Please notify your sales representative if any of the above
items are missing or damaged.
*Optional Accessories can be ordered separately.
Hardware Introduction
Top and Rear Views
Front View
Reset Button
Use a pointed object to hold the reset button down for at least five
seconds to load the factory defaults. Release the reset button
when the Ready LED stops blinking.
LED Indicators
The LED indicators on the top panel are used to display the status
as follows:
Name
Color
Function
PWR
red
Power is on.
off
Power is off.
Ready green Steady: NPort is operational
Blinking: NPort is responding to NPort
Administrator “Locate” function or NPort is
resetting to factory default
off
Power is off or fault condition exists.
Fault
red
IP conflict or DHCP or BOOTP server did not
respond properly.
off
No fault condition detected.
Link
green
Steady: Network is connected no data is ;
being transmitted.
Blinking: ; Network is connected data is
being transmitted.
off Ethernet cable is disconnected or has a
short.
InUse
(P1 to
P8)
green
Serial port has been opened by server side
software.
off
Serial port is not currently opened by server
side software.
TX/RX
(P1 to
P8)
green (Tx)
Serial device is transmitting data.
orange (Rx)
Serial device is receiving data.
off
No data is flowing to or from the serial port.
Hardware Installation
STEP 1: After removing the NPort 5600-8- DTL from the box, place
it on a desktop or other horizontal surface. Connect the 12-48 VDC
power adaptor to the NPort 5600-8-DTL’s power input when using
an AC power source, or connect the NPort 5600-8-DTL’s terminal
block directly to a DC power source.
STEP 2: Use an Ethernet cable to connect the NPort 5600-8- DTL to
a network hub or switch. You can also connect directly to your
computer’s Ethernet port, which is convenient for initial
configuration or testing.
STEP 3: Connect the NPort 5600-8-DTL’s serial port to a serial
device.
Wall or Cabinet Mounting
The NPort 5600-8- DTL comes with two metal attachment plates to
allow installation on a wall or the inside of a cabinet. First, attach
the brackets to the back of the NPort with screws. Next, mount the
unit on a wall or cabinet with screws. Screws should be less than
6.0 mm in head diameter, and less than 3.5 mm in shaft diameter.
– – – – – – 4 5 6
www.moxa.com/support
The Americas:
- - - - - - - +1 714 528 6777 (toll free: 1 888 669 2872)
Europe:
- - -0 +49 89 3 70 03 99
Asia-Pacific:
-2- - +886 8919 1230
China:
- - - - - - +86 21 5258 9955 (toll free: 800 820 5036)
1 . A R 201 Moxa Inc , ll ights Reserved
DIN- Rail Mounting
DIN-Rail attachments can be purchased separately to attach the
product to a DIN DIN-Rail. The - Rail attachments should be
oriented with the metal springs on top.
Standard Attachment
DK-35A Attachment
Software Installation Information
To install NPort Administration Suite, insert the NPort
Document & Software CD into your PC’s CD-ROM drive. Locate
and run the setup program -and follow the on screen instructions.
The setup program will be named
Npadm_Setup_ _ _ .[ ]Version Build [ ]DateTime exe (e.g., “Npadm
_Setup_Ver1.16_Build_11021010.exe”). Refer to the NPort
5600-8- . DTL User’s Manual for more details
Pin Assignments
DB9 Male Ports
Pin
RS-232
RS- 422/
RS- -485 4W
RS- -485 2W
1
DCD
TxD- (A)
–
2
RxD
TxD+(B)
3
TxD
RxD+(B)
Data+(B)
4
DTR
RxD- (A)
Data- (A)
5
GND
GND
GND
6
DSR
–
–
7
RTS
–
–
8
CTS
–
–
9
–
–
–
Note: The NPort 5610-8-DTL supports RS-
232
only.
Specifications
LAN
Ethernet Ports: 10/100 Mbps (RJ45)
Protection: Built-in 1.5 KV magnetic isolation
Serial Interface
RS-232: NPort 5610-8- DTL
RS : -232/422/485 NPort 5650 , 5650I-8-DTL -8- DTL
Serial Ports: 8 (DB9- M connectors)
Isolation: 2 -8- ) KV isolation (NPort 5650I DTL
Serial Signals
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx- - , Rx+, Rx , GND
RS : - -485 (2 wire) Data+, Data- , GND
RS : - -485 (4 wire) Tx+, Tx- - , Rx+, Rx , GND
Serial Line Protection: 15 KV ESD for all signals
RS : -485 Data Direction ADDC™ (Automatic Data Direction
Control)
Serial Communication Parameters
Parity: None, Even, Odd, Space, Mark
Data Bits: 5, 6, 7, 8
Stop Bit(s): 1, 1.5, 2
Flow Control: RTS/CTS, DSR/DTR (for RS- 232 only), XON/XOFF
Transmission Speed: 50 bps to 921.6 Kbps
Power Requirements
Power Input: 12 to 48 VDC
Physical Characteristics
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C ( 40 to 167°F)-
Storage Temperature: - -40 to 85°C ( 40 to 185°F)
Operating Humidity: 5 to 95% RH
Material: SECC sheet metal (0.8 mm)
Dimensions:
Without ears: 197 × 44 × 125 mm
With ears: 229 × 46 × 125 mm
With DIN-Rail kit: 197 × 52.8 × 125 mm
Certifications
Regulatory Approvals: FCC Class A, CE Class A, UL 60950-1,
LVD
Warranty: 5 years
Produktspecifikationer
| Varumärke: | Moxa |
| Kategori: | Server |
| Modell: | Nport 5610-8-DTL |
Behöver du hjälp?
Om du behöver hjälp med Moxa Nport 5610-8-DTL ställ en fråga nedan och andra användare kommer att svara dig
Server Moxa Manualer
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
Server Manualer
- Server Sony
- Server HP
- Server Toshiba
- Server Abus
- Server Acer
- Server Allnet
- Server Apc
- Server Acti
- Server Hikvision
- Server Asus
- Server SilverStone
- Server Megasat
- Server Maxdata
- Server Lenovo
- Server Black Box
- Server Tripp Lite
- Server Axis
- Server Gigabyte
- Server Nec
- Server Technics
- Server Cisco
- Server Matrox
- Server Flir
- Server Fujitsu
- Server Digitus
- Server Kathrein
- Server Buffalo
- Server Supermicro
- Server GeoVision
- Server Netgear
- Server QNAP
- Server LaCie
- Server Dell
- Server Valcom
- Server Asustor
- Server Planet
- Server ZyXEL
- Server Western Digital
- Server Intel
- Server Fantec
- Server D-Link
- Server Seagate
- Server Iomega
- Server Synology
- Server Elac
- Server Blackmagic Design
- Server ATen
- Server Conceptronic
- Server Quantum
- Server Areca
- Server SEH
- Server Ibm
- Server Provision ISR
- Server Sonnet
- Server TAIDEN
- Server Smart-AVI
- Server StarTech.com
- Server SIIG
- Server Advantech
- Server Extron
- Server KanexPro
- Server Avocent
- Server Intellinet
- Server Vimar
- Server Kramer
- Server Hanwha
- Server Ernitec
- Server Sun
- Server Atlona
- Server MvixUSA
- Server Dual Bay
- Server Raidsonic
- Server EMC
- Server AMX
- Server Rocstor
- Server Infortrend
- Server Opengear
- Server G-Technology
- Server EXSYS
- Server Raritan
- Server Chenbro Micom
- Server Mr. Signal
- Server Atlantis Land
- Server C2G
- Server Lantronix
- Server Promise Technology
- Server HGST
- Server IStarUSA
- Server NETSCOUT
- Server Mobotix
- Server Origin Storage
Nyaste Server Manualer
9 December 2024
7 December 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
26 Oktober 2024
26 Oktober 2024
24 Oktober 2024
24 Oktober 2024
21 Oktober 2024