MRCOOL MAC16042A Bruksanvisning

MRCOOL Luftkonditionering MAC16042A

Läs nedan 📖 manual på svenska för MRCOOL MAC16042A (11 sidor) i kategorin Luftkonditionering. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/11

The Signature Series is designed for amateur installation. NOT Installation SHOULD be performed by an authorized technician.

Please read this manual carefully before installation and keep it for future reference.

The Signature Series is designed for amateur installation. NOT Installation SHOULD be performed by an authorized technician.

Please read this manual carefully before installation and keep it for future reference.

Installation Manual

Signature Series

MAC16*A A/C SPLIT SYSTEM

507043-04C Page 1 of 9mrcool.com

Save these instructions for future reference

INSTALLATION INSTRUCTIONS

MAC16*A A/C SPLIT SYSTEM

(P) 507043-04C

*P507043-04C*

Manufactured By

MRCOOL, LLC

Hickory, KY 42051

This manual must be left with the homeowner for future reference.

This is a safety alert symbol and should never be ignored. When you see this symbol on labels or in

manuals, be alert to the potential for personal injury or death.

Improper installation, adjustment, alteration, service

or maintenance can cause property damage, personal

injury or loss of life. Installation and service must be

performed by a licensed professional installer (or

equivalent), service agency or the gas supplier.

WARNING

result in hazards to you and others. Installation MUST

conform with local building codes and with the National

Electric Code NFPA 70/ANSI C1-1993 or current edition

and Canadian Electrical Code Part 1 CSA .

WARNING

Table of Contents

Safety Precautions ......................................................2

Installation ...................................................................2

Electrical Connections.................................................4

Start-Up Procedure......................................................5

System Operation........................................................6

Homeowner’s Information ...........................................9

These instructions are intended as a general guide and

do not supersede national, state or local codes in any

way.

These instructions must be left with the property owner.

NOTE

These instructions and warranty are to be given to the

owner or prominently displayed near the indoor air

handler unit.

NOTE TO INSTALLING DEALER

Page 2 of 9 507043-04Cmrcool.com

These units are designed for use in residential and

commercial type buildings. Units should be installed

with combinations listed in the Air-Conditioning, Heating

Products. Refer to http://www.ahridirectory.org.

Before installation, inspect the unit for shipping damage.

If damage is found, notify the transportation company

Before installing, modifying, or servicing system, main

electrical disconnect switch must be in the OFF position.

There may be more than 1 disconnect switch. Lock out

and tag switch with a suitable warning label. Electrical

shock can cause personal injury or death.

WARNING

Safety Precautions

Follow all safety codes. Wear safety glasses and work

gloves. Use quenching cloth for brazing operations.

thoroughly and follow all warning or cautions attached to

the unit.

1. Always wear proper personal protection equipment.

2. Always disconnect electrical power before removing

panel or servicing equipment.

3. Keep hands and clothing away from moving parts.

4. Handle refrigerant with caution, refer to proper MSDS

from refrigerant supplier.

5. Use care when lifting, avoid contact with sharp edges.

Installation

Unit Location

NOTE: In some cases noise in the living area has been

traced to gas pulsations from improper installation of

equipment.

1. Locate unit away from windows, patios, decks, etc.

where unit operation sounds may disturb customer.

2. Ensure that vapor and liquid tube diameters are

appropriate to capacity of unit.

unecessary turns and bends.

4. Leave some slack between structure and unit to

absorb vibration.

5. When passing refrigerant tubes through the wall, seal

opening with RTV or other silicon-based caulk.

6. Avoid direct tubing contact with water pipes, duct work,

7. Do not suspend refrigerant tubing from joists and

studs with a rigid wire or strap which comes in direct

contact with tubing.

8. Ensure that tubing insulation is pliable and completely

surrounds suction line.

When outdoor unit is connected to factory-approved indoor

unit, outdoor unit contains system refrigerant charge for

operation with indoor unit of the same size when connected

check refrigerant charge using charging information

located on control box cover.

NOTE: Maximum liquid-line size is 3/8 in. O.D. for all

residental applications including long lines.

Outdoor Section

Zoning ordinances may govern the minimum distance the

condensing unit can be installed from the property line.

Install on a Solid, Level Mounting Pad

The outdoor section is to be installed on a solid foundation.

This foundation should extend a minimum of 2” (inches)

beyond the sides of the outdoor section. To reduce the

possibility of noise transmission, the foundation slab

should be in contact with or be an integral part of the NOT

building foundation.

If conditions or local codes require the unit be attached to

pad or mounting frame, tie down bolts should be used and

fastened through knockouts provided in unit base pan.

Rooftop Installations

Mount on level platform or frame 6 inches above roof

surface. Place unit above a load-bearing wall and isolate

unit and tubing set from structure. Arrange supporting

members to adequately support unit and minimize

transmission of vibration to building. Ensure roof structure

and anchoring method is adequate for location. Consult

local codes governing rooftop applications.

NOTE: Unit must be level to within ± 1/4 in./ft per

Clearance Requirements

snow, or ice from roof or eaves cannot fall directly on unit.

Produktspecifikationer

Varumärke:	MRCOOL
Kategori:	Luftkonditionering
Modell:	MAC16042A
Bredd:	1746 mm
Djup:	559 mm
Höjd:	668 mm
Snäll:	Draagbare vloerstandaard
Husmaterial:	Glass, Wood
Monteringsmetod:	Vloer
Maximal viktkapacitet:	90.7 kg
Maximal skärmstorlek:	70 "
Minsta skärmstorlek:	- "
Antal hyllor ingår:	4