MRCOOL MHP15042A Bruksanvisning

MRCOOL Värmepump MHP15042A

Läs nedan 📖 manual på svenska för MRCOOL MHP15042A (13 sidor) i kategorin Värmepump. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/13

The Signature Series is designed for amateur installation. NOT Installation SHOULD be performed by an authorized technician.

Please read this manual carefully before installation and keep it for future reference.

The Signature Series is designed for amateur installation. NOT Installation SHOULD be performed by an authorized technician.

Please read this manual carefully before installation and keep it for future reference.

Installation Manual

Signature Series

MHP15*A HEAT PUMP SPLIT SYSTEM

Page 1 of 11506318-03C mrcool.com

Save these instructions for future reference

INSTALLATION INSTRUCTIONS

(R410A REFRIGERANT)

(P) 506318-03C

*P506318-03C*

Manufactured By

MRCOOL, LLC

Hickory, KY 42051

This manual must be left with the homeowner for future reference.

This is a safety alert symbol and should never be ignored. When you see this symbol on labels or in

manuals, be alert to the potential for personal injury or death.

result in hazards to you and others. Installation MUST

conform with local building codes and with the National

Electrical Code NFPA 70/ANSI C1-1993 or current

edition and Canadian Electrical Code Part 1 CSA C22.1.

WARNING

Improper installation, adjustment, alteration, service

installer or agency must use factory-authorized kits

or accessories when added to this products. Refer to

accessory kit.

CAUTION

These instructions are intended as a general guide and

do not supersede national, state or local codes in any

way.

NOTE

These instructions and warranty are to be given to the

owner or displayed near the indoor air handler unit.

NOTE TO INSTALLING DEALER

Before installing, modifying, or servicing system, main

electrical disconnect switch must be in the OFF position.

There may be more than 1 disconnect switch. Lock out

and tag switch with a suitable warning label. Electrical

shock can cause personal injury or death.

WARNING

Table of Contents

Safety Precautions ......................................................2

Installation ...................................................................2

Electrical Connections.................................................5

Start-Up Procedure......................................................6

Operation.....................................................................7

Homeowner’s Information .........................................10

MHP15*A HEAT PUMP SPLIT SYSTEM

506318-03CPage 2 of 11 mrcool.com

NOTE: Maximum liquid-line size is 3/8 in. O.D. for all

residential applications including long lines.

Outdoor Section

Zoning ordinances may govern the minimum distance the

condensing unit can be installed from the property line.

Install on a Solid, Level Mounting Pad

The outdoor section is to be installed on a solid foundation.

This foundation should extend a minimum of 2” (inches)

beyond the sides of the outdoor section. To reduce the

possibility of noise transmission, the foundation slab

should NOT be in contact with or be an integral part of the

building foundation.

Elevate Unit

Accumulation of water and ice in base pan may cause

equipment damage.

CAUTION

Elevate unit per local climate and code requirements to

provide clearance above estimated snowfall level and

ensure adequate drainage of unit. Use snow stand in areas

where prolonged freezing temperatures are encountered.

If conditions or local codes require the unit be attached to

pad or mounting frame, tie down bolts should be used and

fastened through knockouts provided in unit base pan.

Rooftop Installations

Mount on level platform or frame 6 inches above roof

surface. Place unit above a load-bearing wall and isolate

unit and tubing set from structure. Arrange supporting

members to adequately support unit and minimize

transmission of vibration to building. Ensure roof structure

and anchoring method is adequate for location. Consult

local codes governing rooftop applications.

Roof mounted units exposed to winds above 5 mph may

coil. The height should cover the face of the coil and the

length should be 6” from the access panel.

NOTE: Unit must be level to within ± 1/4 in./ft. per

Clearance Requirements

snow, or ice from roof or eaves cannot fall directly on unit.

These units are designed for use in residential and

light commercial type buildings. Heat Pumps may only

be installed with indoor combinations listed in the Air

Conditioning, Heating and Refrigeration Institute (AHRI)

Inspect the unit for any damage before installation. If

damage is found, notify the transportation company

Safety Precautions

Follow all safety codes. Wear safety glasses and work

gloves. Use quenching cloth for brazing operations.

thoroughly and follow all warning or cautions attached to

the unit.

1. Always wear proper personal protection equipment.

2. Always disconnect electrical power before removing

panel or servicing equipment.

3. Keep hands and clothing away from moving parts.

4. Handle refrigerant with caution, refer to proper MSDS

from refrigerant supplier.

5. Use care when lifting, avoid contact with sharp edges.

Installation

NOTE: In some cases noise in the living area has been

traced to gas pulsations from improper installation of

equipment.

1. Locate unit away form windows, patios, decks, etc.

where unit operation sounds may disturb customer.

2. Ensure that vapor and liquid tube diameters are

appropriate to capacity of unit.

3. Run refrigerant tubes as directly as possible by

avoiding unnecessary turns and bends.

4. Leave some slack between structure and unit to

absorb vibration.

5. When passing refrigerant tubes through the wall, seal

opening with RTV or other silicon-based caulk.

6. Avoid direct tubing contact with water pipes, duct work,

7. Do not suspend refrigerant tubing from joists and

studs with a rigid wire or strap which comes in direct

contact with tubing.

8. Ensure that tubing insulation is pliable and completely

surrounds vapor tube.

When outdoor unit is connected to factory-approved indoor

unit, outdoor unit contains system refrigerant charge for

operation with indoor unit of the same size when connected

check refrigerant charge using charging information

located on control box cover.

Produktspecifikationer

Varumärke:	MRCOOL
Kategori:	Värmepump
Modell:	MHP15042A
Färg på produkten:	Zwart
Vikt:	- g
Bredd:	200.66 mm
Djup:	133.35 mm
Höjd:	7.87 mm
Användarmanual:	Ja
Blåtand:	Ja
Skärm diagonal:	10 "
Upplösning:	1024 x 600 Pixels
Gyroskop:	Ja
Accelerometer:	Ja
Processorfrekvens:	1 GHz
Antal processorkärnor:	4
Intern lagringskapacitet:	8 GB
Minneskortets maximala kapacitet:	32 GB
Wi-Fi-standarder:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
GPS:	Nee
Plats position:	Nee
Vormfaktor:	Slate
Bakre kameraupplösning (numerisk):	2 MP
Främre kameraupplösning (numerisk):	0.3 MP
Typ bakre kamera:	Enkele camera
Inkluderar operativsystem:	Android
Plattform:	Android
Medföljande kablar:	USB
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	MicroSD (TransFlash)
Touch-teknik:	Multi-touch
Pekskärmstyp:	Capacitief
Snabbstartsguide:	Ja
Garantikort:	Ja
Inbyggda högtalare:	Ja
Anslutning för nätadapter:	Ja
Maximal videoupplösning:	- Pixels
Inbyggd mikrofon:	Ja
Internminne:	0.5 GB
Förvarings media:	Flash
Batteritid/batteritid:	- uur
Operativsystem version:	4.4 Kit Kat
WiFi-standard:	Wi-Fi 4 (802.11n)
Typ av enhet:	Mobiele tablet
Fram kamera:	Ja
Backkamera:	Ja
Hörlurarna avstängda:	Ja
Tangentbord ingår:	Nee
Antal mikro-USB 2.0-portar:	1
Antal mini HDMI-portar:	1
Wifi:	Ja