Myson iV120 Bruksanvisning

Myson Uppvärmning iV120

Läs nedan 📖 manual på svenska för Myson iV120 (2 sidor) i kategorin Uppvärmning. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
heatingthroughinnovation.
iVECTOR Control System Instructions
Getting Started
MYSON Eastern Avenue, Team Valley, Gateshead, Tyne & Wear NE11 0PG, UK
T: 0845 402 3434, F: 0191 491 7568, sales@myson.co.uk, www.myson.co.uk
4.0 Functions
Function
Easy Mode
Full Mode
Auto
P
Use (-) and (+) to set F1, F2, F3, A1, A2 and A3.
F1, F2 and F3 turn on Fan Speed 1, 2 and 3 respectively and give ‘Fan only’
operation with no temperature control.
A1, A2 and A3 turn on Fan Speed 1, 2 and 3 respectively, but only if the water
temperature is correct. (Please refer to your installation manual for full details).
Press (OK) to confirm the desired setting.
The iVECTOR will run indefinitely in Comfort Setting, providing automatic control
of the fan speed according to the difference between the set temperature and
the actual temperature.
The room temperature and the time are displayed at all times. Press (OK) to view
the set temperature.
The comfort temperature can be adjusted for this zone by using the (+) and (-)
keys. (The default setting is 21°C).
The iVECTOR, when set in AUTO, will follow your chosen programme. Refer
to section 12 of your installation guide for programme options and set-up.
The room temperature and the time are displayed at all times.
Press (OK) to view the actual temperature in either the comfort or set-back modes.
The iVECTOR will run indefinitely in Set-back.
The room temperature and the time are displayed constantly. Press (OK) to view
set temperature and actual time. To reduce or increase the temperature in this
zone press the (+) and (-) keys. (The default setting is 19°C).
Used to adjust the time and day.
Press (OK), then adjust the minute with (+) and (-) keys. Press (OK) to confirm,
then adjust the hour with (+) and (-) keys. Press (OK) to confirm.
Adjust the day by pressing the (+) and (-) keys. Press (OK) to confirm.
Turns iVECTOR on and off as required.
Provides choice of 9 pre-programmed options and 4 user defined programmes.
Please refer to section 12 in your installation guide for more information.
To access this setting set the control to the symbol . The logo will be
displayed. Adjust the period duration by pressing (+) and (-) keys. (In hours “H”
or, if greater than 24 hours then choose days “D”).
The counter will decrease to “00”. When the period is finished the thermostat
will return automatically to the AUTO setting.
To interrupt this period, adjust the duration to “no” with the minus (-) key.
The temperature applied during this time will be 7°C in winter and 30°C
in summer.
°°
°°
°
°
°
°°
°°
°
24160 iVector Control Guide A5 21/10/2011 09:24 Page 1
iVECTOR Quick Start Guide iVECTOR Quick Start Guide
1.0 Introduction
The electronic control system on the iVECTOR provides a wide range of options that can
be selected according to system complexity and operating requirements.
Each iVECTOR leaves the factory with its controls set to the simplest level (easy mode).
This setting allows you to set the time, set the temperature via the comfort setting as well
as selecting your required fan speed.
3.0 Operation
Comfort Setting:
The iVECTOR will run indefinitely in this setting,
providing the water temperature is greater than
32°C heating, less than 15°C cooling. The fan
speed will automatically switch depending on
the difference between the room temperature
and the required set temperature.
Use the (+) and (-) keys to set your desired
temperature, followed by (OK) to confirm.
(Default setting is 21°C).
Setting Fixed Fan Speed Function:
Selecting one of these options provides fan only operation with no temperature control.
Using the (+) and (-) keys select F1, F2, or F3 for your desired fan speed (F1 being
the lowest fan speed and F3 the highest), followed by (OK) to confirm.
Setting Clock and Day Function:
Using the (<) and (>) keys tab across to to allow you to set the clock and/or day
function then press (OK) to change the time.
To set the minutes use the (+) and (-) keys, followed by (OK) to confirm.
To set the hours use the (+) and (-) keys, followed by (OK) to confirm.
To set the day use the (+) and (-) keys, followed by (OK) to confirm.
Power On/Off Function:
Using the (<) and (>) keys tab across to to allow you to use this function then press
(OK) to either turn the unit on or off.
Use the (<) and (>) keys to navigate the following
options, the function is highlighted when
a appears over the icon:
1. Heating symbol
2. Cooling symbol
3. Temperature symbol - when
this is displayed the current room
temperature is displayed
4. Room temperature
5. Fan speed symbol (fan blades will
rotate when active)
6. Day of week
7. Time
8. Comfort setting
9. Power (on/off)
10. Clock setting
11. Square indicator highlights
selected function.
2.0 Display
5
1
2
4
3
6
7
811 910
1 2 3 4 5 6 7
20.6 16:09
°C
24160 iVector Control Guide A5 21/10/2011 09:24 Page 3

Produktspecifikationer

Varumärke: Myson
Kategori: Uppvärmning
Modell: iV120

Behöver du hjälp?

Om du behöver hjälp med Myson iV120 ställ en fråga nedan och andra användare kommer att svara dig


Uppvärmning Myson Manualer

Myson

Myson iV120 Bruksanvisning

31 Augusti 2024

Uppvärmning Manualer

Nyaste Uppvärmning Manualer

AEG

AEG IR Comfort 1524 Bruksanvisning

18 Oktober 2024
Jaga

Jaga Wave Bruksanvisning

5 Oktober 2024
Jaga

Jaga COCOON Bruksanvisning

5 Oktober 2024
Suntec

Suntec Klimatronic Heat PTC 2000 flame Bruksanvisning

15 September 2024
Suntec

Suntec Klimatronic Heat Prime Bruksanvisning

15 September 2024
Suntec

Suntec Klimatronic Heat Screen 1800 Bruksanvisning

15 September 2024
Suntec

Suntec Klimatronic Air Booster Elite 2000 Bruksanvisning

15 September 2024
Suntec

Suntec Klimatronic Heat Flow 2000 Design Bruksanvisning

15 September 2024
Suntec

Suntec Klimatronic Heat Cannon 2000 Bruksanvisning

15 September 2024
Suntec

Suntec Klimatronic Heat Cannon 3000 Bruksanvisning

15 September 2024