Nedis ANOR5G10WT Bruksanvisning

Läs nedan 📖 manual på svenska för Nedis ANOR5G10WT (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
3G /4G LTE / 5G Outdoor External Antenna
ANOR5G10WT
INTRODUCTION
Thank you for choosing our 5G high gain directional external antenna. This antenna is designed to enhance the performance and signal strength of
your 5G-enabled devices. Please read this manual carefully before installing and using the antenna to ensure optimal performance. Compact and stylish
housing, it can be accompany with your cpe and sim card router or Cell Phone Signal Boosters.
Technical Specications:
Covered Services: 3G / 4G / 4G LTE / 5G
Frequency: 698 - 960 MHz /1710 - 2700 MHz / 3300 - 3600 MHz / 4800 - 5000 MHz
Gain: 10 / 11 ± 1 dBi
High Directionality
Cable xed at antenna RG58U 1 ft N-type connector
4.0m LMR200 cable xed on the antenna with a SMA-male connector
Anti-UV housing
Pole installations method
PACKAGE CONTENT
Please check the content before your installation
1. Antenna x 1 pc
2. LMR 200 cable x 1 pc
3. Installation materials
4. Manual 1x
Installation
Step 1. Read this manual, ideally from start to nish, so that you understand the whole Installation process before you begin.
Step 2. Choose a suitable location for antenna installation with a clear line of sight to the 4G LTE or 5G cellular towers. Use the provided
mounting kit to secure the antenna. Ensure a stable and secure mount to prevent movement or damage. For optimal performance, it is
recommended to install the antenna outdoors.
Step 3. Locate a wooden pole or metallic pole where you would like to x the antenna.
Step 4. Fix the antenna to the pole by using the mounting material, then secure the antenna by tightening the U-Bolt with the buttery screws
Step 5. Connect the SMA-Male connector of the LMR200 coaxial cable on the antenna to the 4G or 5G device's antenna port. The
device could be a 4G LTE or 5G CPE (Customer Premises Equipment), SIM card router, or cell phone Singla Boosters. Ensure a secure
connection to minimize signal loss.
Step 6. Adjust the antenna direction for maximum signal strength. Use a compass or refer to your device's signal strength indicator to nd the
optimal direction. Gradually adjust the antenna angle and direction, checking the signal strength periodically. Ensure a secure and snug
connection to minimize signal loss.
Maintenance and Care:
Regularly inspect the antenna for any signs of damage, corrosion, or loose connections.
Troubleshooting:
If experiencing signal issues, recheck the antenna connection and directional alignment. Ensure there are no obstructions blocking the antenna's
line of sight to the cellular tower .
Compliance and Safety Guidelines:
Comply with local regulations and safety standards during installation.
Do not attempt to modify or disassemble the antenna.
Ensure that the installation location is safe and secure.
Thank you for choosing our 5G Outdoor Antenna. Enjoy enhanced 5G connectivity!
Nedis BV
De Tweeling 28, 5215 MC ’s-Hertogenbosch – The Netherlands
service@nedis.com

Produktspecifikationer

Varumärke: Nedis
Kategori: Inte kategoriserad
Modell: ANOR5G10WT

Behöver du hjälp?

Om du behöver hjälp med Nedis ANOR5G10WT ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Nedis Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer