Netgear AGM731F Bruksanvisning

Läs nedan 📖 manual på svenska för Netgear AGM731F (12 sidor) i kategorin Kablar för PC och kringutrustning. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/12
350 E. Plumeria Drive
San Jose, CA 95134-1911 USA
1-888-NETGEAR (638-4327)
E-mail: info@NETGEAR.com
www.NETGEAR.com
RoHS Compliant Small
Form Factor Pluggable
Transceiver for Gigabit
Ethernet and Fiber
Channel
AGM731F
2
Rev. 0A
RoHS Compliant Small Form Factor Pluggable Transceiver for
Gigabit
Ethernet and Fiber Channel
FEATURES
Compliant with SFP Transceiver MSA
specification
Compliant with Specifications for IEEE
802.3z/Gigabit Ethernet
Compliant with the 1.0625GBd Fiber Channel
FC-PI 100-M5-SN-I Rev.13
Compliant with Industry Standard RFT
Electrical Connector and Cage
Single + 3.3V Power Supply and TTL Logic
Interface
EEPROM with Serial ID Functionality
Laser Class 1 Product which comply with the
requirements of IEC 60825-1 and IEC 60825-2
Duplex LC Connector interface
Description
This transceiver is hot pluggable 3.3V
Small-Form-Factor transceiver module designed
expressly for high-speed communication applications
that require rates of up to 1.25Gbit/sec. It is compliant
with the Gigabit Ethernet standards, as well as the SFP
Multisource Agreement (MSA).
It provides with the LC receptacle that is compatible
with the industry standard LC connector. The
transceiver is also compatible with industry standard
RFT connector and cage.
The post-amplifier of the transceiver also includes a
LOS (Loss Of Signal) circuit that provides a TTL
logic-high output when an unusable optical signal level
is detected.
The transceiver is a Class 1 eye safety product.
The optical power levels, under normal operation, are
at eye safe level.
Applications
Gigabit Ethernet
Fibre channel
Switch to Switch interface
Switched backplane applications
File server interface
Performance
Data Link up to 550m in 50/125 m Multi Mode Fiber µ
Data Link up to 275m in 62.5/125 m Multi Mode Fiberµ
3
Rev. 0A
Absolute Maximum Ratings
Parameter Symbol
Min. Typ. Max. Unit Note
Storage Temperature Ts -40 85 ºC
Supply Voltage V
CC
0 5 V
Recommended Operating Conditions
Parameter Symbol
Min. Typ. Max. Unit Note
Case Operating Temperature T
C
-5 70 ºC
Supply Voltage V
CC
3.135
3.465
V
Electrical Characteristics
(V
CC
=3.135V to 3.465V)
Parameter Symbol
Min. Typ. Max. Unit Note
Total Supply Current I
CCT
180 300 mA
Transmitter
Transmitter Differential Input Voltage V
DT
0.5 2.4 V 1
Transmitter Disable Input-High V
DISH
2 V
CC
+0.3
V
Transmitter Disable Input-Low V
DISL
0 0.8 V
Transmitter Fault Output-High V
TXFH
2 V
CC
+0.3
V 2
Transmitter Fault Output-Low V
TXFL
0 0.8 V 2
Receiver
Receiver Differential Output Voltage V
DR
0.35 0.7 2 V 3
LOS Output Voltage-High V
LOSH
2 V
CC
+0.3
V 2
LOS Output Voltage-Low V
LOSL
0 0.8 V 2
Output Data Rise/Fall Time t
r
/ t
f
400 psec 4
Total Jitter (pk-pk) TJ
RX
220 psec
Notes:
1. Internally AC coupled and terminated to 100Ohm differential load.
2. Pull up to V
CC
with a 4.7K – 10K Ohm resistor on host Board
3. Internally AC coupled, but requires a 100 Ohm differential termination at or internal to Serializer/
Deserializer.
4. These are 20%~80% values

Produktspecifikationer

Varumärke: Netgear
Kategori: Kablar för PC och kringutrustning
Modell: AGM731F

Behöver du hjälp?

Om du behöver hjälp med Netgear AGM731F ställ en fråga nedan och andra användare kommer att svara dig




Kablar för PC och kringutrustning Netgear Manualer

Netgear

Netgear AGM731F Bruksanvisning

29 September 2024

Kablar för PC och kringutrustning Manualer

Nyaste Kablar för PC och kringutrustning Manualer