Nitecore EA21 Bruksanvisning

Nitecore Ficklampor EA21

Läs nedan 📖 manual på svenska för Nitecore EA21 (1 sidor) i kategorin Ficklampor. Denna guide var användbar för 15 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

EA21

Features

· Utilizes CREE XP-G2 (R5) LED

· Maximum output of 360 lumens

· Integrated “Precision Digital Optics Technology” provides extreme reflector performance

· Boasts a peak beam intensity of 7000 cd and a throw distance of up to 167 meters

· Dual-switch design ensures unprecedented ease of use

· Secondary red LED provides constant / flashing illumination

· Indicates battery voltage with a red flashing LED (accurate to 0.1V)

· High efficiency constant current circuit enables maximum runtime of up to 30 hours

· Direct access to ultra-low and turbo output

· Reverse polarity protection prevents damage from incorrectly inserted batteries

· Detachable two-way anti-rolling clip

· Toughened ultra-clear mineral glass with anti-scratch coating

· Constructed from aero grade aluminum alloy

· HAIII military grade hard-anodized

· Waterproof in accordance with IPX-8 (2 meters submersible)

· Impact resistant to 1.5 meters

· Tail stand capability

Dimensions

Length: 5.57” (141.5mm)

Head diameter: 1” (25.4mm)

Tail diameter: 0.83” (21.2mm)

Weight: 2.36oz (67 gram) (without battery)

Direct Access to Ultra-low/Turbo Output

With the light switched off, press and hold the ON/OFF button for more than one second to

access ultra-low mode (1 lumen).

With the light switched off, press and hold the MODE button for more than one second to access

turbo mode (360 lumens).

NOTE: When in turbo mode, the EA21 will adjust output luminance automatically within 3 minutes

of use to prevent overheating and extend battery longevity.

Red Light / Signal Light Mode

With the light switched off, press the MODE button to enter red light mode. In this mode, the

secondary red LED will illuminate steadily.

When in red light mode, press and hold the MODE button for more than one second to enter

signal light mode. In this mode, the secondary red LED will flash to serve as a signal light.

Simply press any button to exit the red light /signal light mode.

Special modes (Strobe/Location/SOS)

With the light switched on, press and hold the MODE button for more than one second to enter

strobe mode. When in strobe mode, press and hold the MODE button for more than one second

again to cycle through Location Beacon, SOS and Strobe modes. To exit, simply press the MODE

button to resume the brightness level last used, or press the ON/OFF button to switch the

light off.

Strobe Ready

With the light switched off, press the MODE button twice in quick succession to enter Strobe

mode. To exit, simply press any button.

Lockout / Unlock

With the light switched on, press and hold the ON/OFF button and the MODE button

simultaneously for over one second to switch the light off and enter lockout mode. In lockout mode,

the EA21 conserves battery power for over 300 days; the two buttons on EA21 will not work, thus

preventing accidental activation of the light. To exit lockout mode, simply press and hold the

ON/OFF button and the MODE button simultaneously for over one second again.

NOTE:

1. Upon entering lockout mode, the secondary red LED will flash to indicate battery voltage. Please

refer to the “Power Tips” section for more details.

2. When the EA21 is kept in a backpack or left unused for extended periods, Nitecore recommends

the tailcap is loosened or batteries are removed to cut off the power entirely, thus preventing

accidental activation of the flashlight or battery leakage.

Power Tips

After battery installation or lockout mode activation, the secondary red LED will flash to indicate

battery voltage (accurate to 0.1V). For example, when battery voltage is at 2.4V, the red LED will

flash 2 times, followed by a one second pause and another 4 flashes. Different voltages represent

the corresponding remaining battery power levels:

Output & Runtime

NOTICE:

The stated data has been measured in accordance with the international flashlight testing

standards ANSI/NEMA FL1, using two high quality AA rechargeable batteries (1.2V, 2500mAH)

under laboratory conditions. The data may vary in real-world use due to different battery usage or

environmental conditions.

Operating Instructions

Battery Installation

Insert two AA batteries as illustrated

NOTE: After loading the batteries, the secondary

red LED will flash to indicate battery voltage.

Please refer to the “Power Tips” section of this

manual for details.

WARNING:

Ensure batteries are inserted with the positive (+)

end pointing towards the head. The EA21 will not

be operational with incorrectly inserted batteries.

Accessories

Quality holster, clip, lanyard,

spare O-ring

Battery Options

2.7V2.1V 2.4V 2.5V

Low Power Full Power

TURBO HIGH MID LOW

LUMENS

220

LUMENS

360

LUMENS

110

LUMENS

h min15

h min45

h min15

LOWER

LUMEN

167m

(Beam Distance)

7000cd

(Peak Beam Intensity)

IPX-8, 2m

(Waterproof AND Submersible)

1.5m

(Impact Resistant)

The All-Round Flashlight Expert

Thanks for purchasing NITECORE!

User Manual

On / Off Operation

To switch ON: Press the ON/OFF button once.

To switch OFF: Press the ON/OFF button once again to switch the light off and enter standby mode

Standby Mode

With the light switched on, press and hold the ON/OFF button for more than one second to switch the

light off and activate the secondary red LED to flash once every three seconds, thus helping the user

locate the EA21 in dark conditions. With the red LED on, the EA21 will operate for up to 8 consecutive

days. With the red LED off, the EA21 can remain on standby for more than 300 days.

Brightness Levels

With the EA21 switched on, press the MODE button repeatedly to cycle through the following

brightness levels: ultra-low, low, medium, high and turbo. Once a brightness level is selected it will

be saved and resumed when the EA21 is reactivated.

Changing / Charging Batteries

Batteries should be replaced or recharged when output appears to be dim or the flashlight

becomes unresponsive.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of

silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any defective / malfunctioning NITECORE®

product can be repaired free of charge for a period of 60 months (5 years) from the date of

purchase. Beyond 60 months (5 years), a limited warranty applies, covering the cost of labor and

maintenance, but not the cost of accessories or replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.

2. The product(s) is/are damaged through improper use.

3. The product(s) is/are damaged by leakage of batteries.

For the latest information on NITECORE® products and services, please contact a local

NITECORE® distributor or send an email to service@nitecore.com

※All images, text and statements specified herein this user manual are for reference purpose only.

Should any discrepancy occurs between this manual and information specified on

www.nitecore.com, information on our official website shall prevail. Sysmax Industry Co., Ltd.

reserves the rights to interpret and amend the content of this document at any time without prior

notice.

SYSMAX Industry Co., Ltd.

TEL: +86-20-83862000

FAX: +86-20-83882723

E-mail: info@nitecore.com

Web: www.nitecore.com

Address： Rm1401-03, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600

TYPE Nominal voltage Compatible

Primary AA battery AA 1.5V Y (Recommended)

Rechargeable AA battery AA 1.2V Y (Recommended)

Primary AA Li-ion battery L91 1.5V Y (Recommended)

Primary LiFePO4 battery 14500 3.2V N (Banned)

Rechargeable Li-ion battery 14500 3.7V N (Banned)

20150916

Please find us on facebook:

NITECORE Flashlights

Produktspecifikationer

Varumärke:	Nitecore
Kategori:	Ficklampor
Modell:	EA21
Färg på produkten:	Brown, White
Vikt:	960 g
Bredd:	273 mm
Djup:	17.3 mm
Höjd:	180.3 mm
Blåtand:	Ja
Sensor för omgivande ljus:	Ja
Skärm diagonal:	10.1 "
Upplösning:	1280 x 800 Pixels
Gyroskop:	Ja
Processorfrekvens:	1 GHz
Processorfamilj:	NVIDIA Tegra
Processormodel:	Tegra 2
Antal processorkärnor:	2
Intern lagringskapacitet:	32 GB
Wi-Fi-standarder:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth-version:	2.1+EDR
GPS:	Ja
Elektronisk kompass:	Ja
Plats position:	Ja
Vormfaktor:	Schuif
Bakre kameraupplösning (numerisk):	5 MP
Främre kameraupplösning (numerisk):	1.2 MP
Videoinspelning:	Ja
Typ bakre kamera:	Enkele camera
Inkluderar operativsystem:	Android
Plattform:	Android
Ethernet LAN:	Nee
Medföljande kablar:	USB
Integrerad minneskortläsare:	Ja
Kompatibla minneskort:	MicroSD (TransFlash)
Touch-teknik:	Multi-touch
Pekskärmstyp:	Capacitief
Inkluderar AC-adapter:	Ja
LED-bakgrundsbelysning:	Ja
Antal USB 2.0-portar:	1
Mikrofon, linjeingång:	Nee
DVI-port:	Nee
Inbyggda högtalare:	Ja
Antal inbyggda högtalare:	1
Anslutning för nätadapter:	Nee
Maximal videoupplösning:	- Pixels
Inbyggd mikrofon:	Ja
Internminne:	1 GB
Förvarings media:	Flash
Batteritid/batteritid:	8 uur
Operativsystem version:	3.2
WiFi-standard:	Wi-Fi 4 (802.11n)
Typ av enhet:	Full-size tablet
Intel® Wireless Display (Intel® WiDi):	Nee
Total lagringskapacitet:	32 GB
Fram kamera:	Ja
Intel® My WiFi Technology (Intel® MWT):	Nee
Intel® Smart Response Technology:	Nee
Intel® Hyper Threading Technology (Intel® HT Technology):	Nee
Intel® Turbo Boost-teknik:	Nee
Förbättrad Intel SpeedStep-teknik:	Nee
Intel® Small Business Advantage (Intel® SBA):	Nee
Intel® Identity Protection Technology (Intel® IPT):	Nee
Backkamera:	Ja
Hörlurarna avstängda:	Nee
Tangentbord ingår:	Ja
Anslutning till basstation:	Nee
Kombinerad hörlurs/mikrofonport:	Ja
SmartCard-kortplats:	Nee
Typ CardBus PCMCIA-slot:	Nee
Grafikkortsfamilj:	NVIDIA
ExpressCard-kortplats:	Nee
Antal mini HDMI-portar:	1
Wifi:	Ja
Batteriteknik:	Lithium-Polymeer (LiPo)
Antal battericeller:	1
Batterijcapaciteit:	25 Wh