Nokia 6256 Bruksanvisning

Nokia Mobiltelefoner 6256

Läs nedan 📖 manual på svenska för Nokia 6256 (233 sidor) i kategorin Mobiltelefoner. Denna guide var användbar för 21 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/233

User Guide Manual del Usuario

Nokia 6255, Nokia 6255i, Nokia 6256,

and Nokia 6256i User Guide

Note: Spanish translation of this guide begins on page 121.

Part No. 9231200, Issue No. 1

Nokia, Nokia Connecting People, Nokia 6255, Nokia 6255i, Nokia 6256, Nokia 6256i, Pop-Port,

and the Nokia Original Enhancements logos are trademarks or registered trademarks of Nokia

Corporation. Other company and product names mentioned herein may be trademarks or trade

names of their respective owners.

Printed in Canada 10/2004

Includes RSA BSAFE cryptographic or security protocol software from

RSA Security.

Java is a trademark of Sun Microsystems, Inc.

The information contained in this user guide was written for the Nokia 6255, Nokia 6255i,

Nokia 6256, and Nokia 6256i products. Nokia operates a policy of ongoing development.

Nokia reserves the right to make changes to any of the products described in this document

without prior notice.

UNDER NO CIRCUMSTANCES SHALL NOKIA BE RESPONSIBLE FOR ANY LOSS OF DATA OR

INCOME OR ANY SPECIAL, INCIDENTAL, AND CONSEQUENTIAL OR INDIRECT DAMAGES

HOWSOEVER CAUSED.

THE CONTENTS OF THIS DOCUMENT ARE PROVIDED “AS IS.” EXCEPT AS REQUIRED BY APPLICABLE

LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE MADE IN RELATION TO THE ACCURACY AND RELIABILITY OR CONTENTS OF THIS

DOCUMENT. NOKIA RESERVES THE RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY

TIME WITHOUT PRIOR NOTICE.

EXPORT CONTROLS

This device may contain commodities, technology or software subject to export laws and

regulations from the US and other countries. Diversion contrary to law is prohibited.

FCC/INDUSTRY CANADA NOTICE

Your phone may cause TV or radio interference (for example, when using a telephone in close

proximity to receiving equipment). The FCC or Industry Canada can require you to stop using

your telephone if such interference cannot be eliminated. If you require assistance, contact your

local service facility. This device complies with part 15 of the FCC rules. Operation is subject to

the condition that this device does not cause harmful interference.

Contents

For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1 Phone at a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2 Set up your phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3 Text entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

4 Messages (Menu 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5 Call log (Menu 2). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

6 Contacts (Menu 3). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

7 Camera (Menu 4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

8 Gallery (Menu 5) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

9 Media (Menu 6). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

10 Settings (Menu 7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

11 Organizer (Menu 8) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

12 Mobile Web (Menu 9) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

13 Connectivity (Menu 10). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

14 Extras (Menu 11). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

15 Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

16 Reference information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Additional safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Appendix A Message from the CTIA . . . . . . . . . . . . . . . . . . . . . . . 105

Appendix B Message from the FDA . . . . . . . . . . . . . . . . . . . . . . . 109

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

NOTES

For your safety

Read these simple guidelines. Not following them may be dangerous or illegal.

Read the complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle

while driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could

affect performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in

aircraft.

SWITCH OFF WHEN REFUELING

Don't use the phone at a refuelling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don’t use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product

documentation. Don't touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect

incompatible products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACKUP COPIES

Remember to make back-up copies or keep a written record of all

important information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed

safety instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press the End key as many

times as needed to clear the display and return to the main screen. Enter

the emergency number, then press the Call key. Give your location. Do not

end the call until given permission to do so.

Welcome

Congratulations on your purchase of the Nokia 6255, Nokia 6255i, Nokia 6256, or

Nokia 6256i mobile phone. Your phone provides many functions which are practical

for daily use, such as a hands-free loudspeaker, alarm clock, calculator, calendar,

and more. Your phone can also connect to a PC, laptop, or other device using a data

cable, Bluetooth, or Infrared. To personalize your phone, you can set your favorite

ring tones.

■About your device

The Nokia 6255, Nokia 6255i, Nokia 6256, or Nokia 6256i wireless phone described

in this guide is approved for use on the CDMA 800, 1900 and AMPS networks.

Contact your service provider for more information about networks.

When using the features in this device, obey all laws and respect privacy and

legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock, the

phone must be switched on. Do not switch the device on when wireless

phone use may cause interference or danger.

■Network Services

To use the phone you must have service from a wireless service provider. Many of

the features in this device depend on features in the wireless network to function.

These Network Services may not be available on all networks or you may have to

make specific arrangements with your service provider before you can utilize

Network Services. Your service provider may need to give you additional instructions

for their use and explain what charges will apply. Some networks may have

limitations that affect how you can use network services. For instance, some

networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear in your device menu. Contact

your service provider for more information.

■Shared memory

The following features in this device may share memory: contacts, text messages,

photos, images, and tones in gallery, calendar notes, games, and applications. Use of

one or more of these features may reduce the memory available for the remaining

features sharing memory. Your phone may display a message that the memory is

full when you try to use a shared memory feature. In this case, delete some of the

information or entries stored in the shared memory features before continuing.

Some of the features, such as photos, images, tones in gallery, text messages, and

applications may have a certain memory specially allotted to them in addition to the

memory shared with other features.

■Register your phone

Make sure to register your phone at www.warranty.nokiausa.com or call

1-888-NOKIA-2U (1-888-665-4228) so that we can serve your needs better

if you should need to call a customer center or to have your phone repaired.

■Getting help

Find your phone label

If you need help, Nokia Customer Care is

available for assistance. Before calling,

we recommend that you write down

the following information and have

it available:

• Electronic serial number (ESN)

• Your zip code (only in the US)

The ESN is found on the type label, which is located beneath the battery on the

back of the phone. See “Remove the back cover”, page 16 and “Remove the battery”,

page 16 for more information.

Contact Nokia

Please have your product with you when contacting either of theses numbers:

Nokia Customer Care Center, USA

Nokia Inc.

7725 Woodland Center Boulevard, Suite #150

Tampa, Florida 33614

Tel: 1-888-NOKIA-2U (1-888-665-4228)

Fax: 1-813-249-9619

TTY/TDD users: 1-800-24-NOKIA (1-800-246-6542)

Customer Care, Canada

Nokia Products Ltd.

601 Westney Road South

Ajax, Ontario L1S 4N7

Tel: 1-905-427-1373 or 1-888-22-NOKIA (1-888-226-6542)

Fax: 1-905-619-4360

Updates

From time to time, Nokia updates this guide to reflect changes. The latest version

may be available at www.nokia.com. An interactive tutorial for this product may

be available at the Web site www.nokiahowto.com.

Accessibility solutions

Nokia is committed to making mobile phones easy to use for all individuals,

including those with disabilities. For more information visit the Web site at

www.nokiaaccessibility.com.

Phone at a glance

■The start screen

Note: Depending on your wireless service provider and the model number of

your phone, some or all of the following selection keys may appear on the

start screen.

The start screen is home base and indicates your

phone is in idle mode.

Signal strength (1)—A higher bar indicates a stronger

network signal.

Menu (2)—Press the Center selection key to select

this option.

Go to (3)—Press the Left selection key to select this option.

Names or network operator menu (4)—Press the Right selection key to select

this option.

Battery level (5)—A higher bar indicates more power in the battery.

■Quick keys

Note: Depending on your wireless service provider and the model number

of your phone, some or all of the following Quick keys may appear on the

start screen.

At the start screen, the Five-way scroll key instantly takes you to frequently-

accessed menus:

Scroll up key—Go to the contacts list or network operator menu.

Scroll right key—View the calendar.

Scroll down key—Go to the contacts list.

Scroll left key—Quickly create a text message.

Center selection key—Selects highlighted menus and submenus.

Camera key—Quickly activates the viewfinder.

Phone at a glance

■Get the most out of this guide

The following sections illustrate the various components of your phone. Familiarize

yourself with these sections to help you understand the instructions that follow.

This guide uses certain terms for the steps that you are asked to perform.

• Press means to press and release a key quickly (short press). For example, Press 7

means press the key on the keypad that is labeled with the number 7 and the

letters “pqrs”.

• Press and hold means to press and hold a key for 2–3 seconds; then release the

key (long press).

• Selection keys are used to select a menu option. To select an option, press the

selection key below the menu item on the phone screen.

• Scroll keys are used to move up, down, left, or right in the menus.

• Call and End keys: Press the Call key to place a call or to answer an incoming

call. Press the End key to end a call or press and hold to return to the idle screen.

■Phone menus

Phone features are grouped according to function and are accessed through the

main menus. Each main menu contains submenus and lists from which you can

select or view items and customize your phone features. You can access these

menus and submenus by using the scroll method or by using a shortcut.

Note: Some features may not be available, depending on your network. For

more information, contact your wireless provider.

The scroll method

1. At the start screen, select Menu and scroll through the main

menus using the up and down Five-way scroll key.

As you scroll through the menus, the menu number appears in

the upper right corner of the display. Below the number is a

scroll bar with a tab that moves up or down on the right side of the display

screen as you scroll through the menus, providing a visual representation of

your current position in the menu structure.

2. When you arrive at a menu, press Select (the Center selection key) to

enter submenus.

• Press Back (the Right selection key) to return to the previous menu.

• Press the End key to return to the start screen from any menu or submenu.

Set up your phone

2. Set up your phone

■Antenna

Your device has two antennas:

• The fixed antenna is active unless the extendable

antenna is fully extended.

In the Nokia 6255i and 6256i phone, the GPS antenna is

also internal and is activated when placing emergency

calls or when On is selected from the Location info sharing

menu. For more information on location info sharing, see

“Location info sharing”, page 65.

Your device has a fixed and extendable antenna located

towards the top of the phone when the fold is closed.

Hold the phone as you would any other telephone with

the antenna area pointed up and over your shoulder.

Note: As with any other radio transmitting

device, do not touch the antenna unnecessarily

when the device is switched on. Contact with

the antenna affects call quality and may

cause the phone to operate at a higher power

level than otherwise needed. Not touching the

antenna area during a phone call optimizes

the antenna performance and the talktime of

your device.

■Battery

Note: Before removing the cover, always switch off the power and disconnect

the charger and any other device.

Avoid touching electronic components while changing the covers.

Always store and use the device with the covers attached.

Remove the back cover

1. With the back of the phone facing you,

push down on the back cover.

2. Slide the back cover toward the bottom

of the phone and remove.

Remove the battery

After you have removed the back cover,

insert your finger into the finger grip, and

lift the battery from its compartment.

UIM (CDMA SIM) card slot

Your phone has a UIM card slot built into

the mechanics. However, the UIM is not functional in this phone model. Avoid

placing anything into the UIM card slot.

Install the MMC card

Before installing the MMC card, always

make sure that the phone is switched off

and that you have removed the cover

and battery.

Open the MMC holder by lifting the

latch(1) and lifting the holder up (2).

Insert the MMC card into the holder

with the gold-colored contacts facing

down, matching up with the gold-

colored contacts on the phone. The

beveled corner of the card fits into the

beveled corner of the slot.

Close the UIM/MMC holder and

replace the battery.

Set up your phone

Replace the battery

1. Insert the battery, gold-colored contact end

first, into the battery slot.

2. Push down on the other end of the battery to

snap the battery into place.

Replace the back cover

Set the back cover on the phone with

the cover tabs aligned with the slots in

the phone.

Slide the back cover toward the top of

the phone until the back cover is securely

in place.

Charge the battery

1. Plug the charger transformer into a

standard ac outlet.

2. Insert the charger output plug into the

round jack at the bottom end of the phone.

After a few seconds, the battery indicator

in the display starts to scroll from bottom

to top. If the battery is completely

discharged, it may take a few minutes

before the charging indicator appears

on the display or before any calls can

be made.

■Turn your phone on or off

1. To turn your phone on or off, press and hold

the Power key on top of the phone for at least

3 seconds.

2. Enter the security code, lock code, or PIN code, if

necessary, and press OK.

Set up your phone

Conference calling

Conference calling is a network service that allows you to take part in a conference

call with two other participants.

1. Make a call to the first participant.

2. With the first participant on the line, select Options > New call.

3. Enter the phone number of the second participant, or press Search to retrieve a

number from the contacts list. Press OK. The first participant is put on hold.

4. When the second participant picks up, press the Call key to connect the calls.

5. To end the conference call, press Options > End all calls or press the End key.

■Answer calls

Answer or silence an incoming call

1. Press the Call key or Answer to answer the call.

2. With the fold open:

Press the End key to reject the call.

Press Silence to mute the ringing tone, then press Dismiss, or do nothing, and the

call is eventually diverted to voicemail.

If your phone is set to Silent in the Profiles menu, press Dismiss, and the call is

diverted to voicemail.

3. With the fold closed:

Press the Volume key to mute the ringing tone.

A long press of the Voice/shutter key answers an incoming call with the

loudspeaker.

Your phone answers an incoming call when you open the fold. This is the default setting,

but you can change the setting to Phone will not answer calls when fold is opened.

From the start screen, select Menu > Settings > Call settings > Answer when fold is

opened > On or Off.

Adjust the earpiece volume

While in a call, press the Up arrow or Down arrow on the volume key located on the

left side of your phone to adjust the volume of the earpiece.

When adjusting the volume, a bar chart appears in the display indicating the

volume level.

Answer a call with the keypad locked

To answer a call with the keypad locked, simply press the Call key with fold open.

To answer a call with the fold closed and with the keypad locked, press and hold the

Voice/shutter key to answer with the loudspeaker. During the call, all features

function as normal. When you end or reject the call, the keypad automatically re-locks.

See “Keyguard”, page 21 for details.

When the keypad lock is on, calls still may be possible to the official emergency

number programmed into your device.

Key in the emergency number and press .

Using the loudspeaker

Warning: Do not hold the device near your ear when the loudspeaker is in

use, because the volume may be extremely loud.

You can use your phone as a loudspeaker during a call. While in a call:

• To activate the loudspeaker while in a call with the fold open, press Loudspeaker.

• To activate the loudspeaker when answering a call with the fold closed, press the

Voice/shutter key.

• To deactivate the loudspeaker during a call, press Handset.

The loudspeaker is deactivated automatically when a call (or a call attempt) ends or

when certain enhancements are connected.

Options during a call

Many of the options that you can use during a call, are network services. Check with

your wireless service provider for more information.

1. Press Options during a call to display the following options:

Loudspeaker/Handset—Activate or deactivate the loudspeaker while in a call.

New call—Initiate a conference call. See “Conference calling”, page 19

for information.

Save—Save a number entered during a call.

Add to contact—Add a number entered during a call to a contact in your list.

End all calls—Disconnect from all active calls.

Touch tones—Enter the number(s), and press Tones to send the number(s) as tones.

Contacts—View the contacts list.

Menu—View the phone menu.

2. Scroll to an option, and press Select to activate the option or enter its submenu.

Set up your phone

■Keyguard

With keyguard, you can lock the keypad to prevent keys from being pressed accidentally.

If the keypad is locked, it unlocks when you receive a call. After the call, the lock

automatically reactivates.

When the keyguard is on, calls still may be possible to the official emergency number

programmed into your phone. Key in the emergency number, and press the Call key.

Lock the keypad

Select Menu with the Center selection key; then press the * key within two seconds.

Unlock the keypad

Select Unlock with the Center selection key; then press the * key within two seconds.

3. Text entry

You can use two methods for entering text and numbers:

• Standard mode is the only way to enter text into the contacts list and to rename

caller groups.

• Predictive text input is a quick and easy method for writing messages or creating

a calendar note.

■Standard mode

Text (Abc)

• Press a key once to insert the first letter on the key, twice for the second letter,

etc. If you pause briefly, the last letter in the display is accepted and your phone

awaits the next entry.

• Press Clear to backspace the cursor and delete a character.

• Press and hold Clear to backspace continuously and delete characters.

• Press the 0 key to enter a space, thereby accepting a completed word.

• Press the 1 key as many times as necessary to scroll through a list of commonly

used characters.

• Press the * key to display a complete list of special characters.

• Press and hold the # key to bring up the Editor settings (Number mode,

Predictive text on/Predictive text off, Writing language).

• Press the # key to switch between uppercase, lowercase, and sentence case text.

As you press the # key, the following icons (not the descriptions) appear in the

upper left of the display screen:

Uppercase text: standard mode is on

Lowercase text: standard mode is on

Sentence case text: standard mode is on

Messages (Menu 1)

4. Messages (Menu 1)

If you have subscribed to a message network service, you can send and receive

messages to compatible phones that are also subscribed to a message service.

You can also send and receive picture messages, multimedia messages, and e-mail

if supported by your service provider. Also, you can make distribution lists that

contain phone numbers and names from your contact list. See “Text entry”, page 24

for more information.

When composing text messages, picture messages, or multimedia messages, check the

number of characters allowed in the top right corner of the message. Using special

(Unicode) characters takes up more space. If there are special characters in your

message, the indicator may not show the message length correctly. Before the message

is sent, the phone will tell you if the message exceeds the maximum length allowed

for one message.

Note: When sending messages, your device may display Message sent.

This is an indication that the message has been sent by your device to the

message center number programmed into your device. This is not an

indication that the message has been received at the intended destination.

For more details about messaging services, check with your service provider.

Important: E-mail messages or multimedia message objects may contain

viruses or otherwise be harmful to your device or PC. Do not open any

attachment if you are not sure of the trustworthiness of the sender.

■Text messages

Write and send

1. At the start screen, select Menu > > Messages > Text messages Create message.

To go quickly to the Create message display, press the Scroll left key from the

start screen.

2. Compose or reply to a message using the keypad, and select Send.

For other options while composing the message, select Options and one of

the following:

Preview—Preview the message when sending a picture message.

Sending options—Mark/Unmark options Urgent, Delivery note, Callback no.,

and Signature.

Clear text—Erase the text from the message editor.

Insert picture—Insert a picture from a Templates folder into your message.

Change picture—Change the picture in a picture message.

Delete picture—Delete the picture in a picture message.

Insert contact—Insert a name from your contacts list into your message.

Insert number—Insert a phone number or find a phone number in the contacts list.

Save message—Select Drafts to save the message in the Drafts folder; select

Templates to save the message as one of your predefined templates in the

Templates folder. If you have defined any folders under My folders, they also

appear in the list and you can save the message to one of them.

Exit editor—Exits the message editor.

Use template—Insert a predefined template into your message.

Insert smiley—Insert a smiley into your message.

Writing language—Choose the language you want to use.

Predictive text—Turn predictive text on or off.

Insert word—Enter a word and insert it into your message. This option is

available if predictive text is on.

Insert symbol—Insert a special character into your message. This option is

available if predictive text is on.

Matches—View matches found in the dictionary for the word you want to use.

3. To send the message, select Send > Send to number, Send to e-mail, or Send to

many. Enter the recipient’s phone number or e-mail address or select Search to

retrieve a number or e-mail address from Contacts, and select OK.

Templates

Templates are short, prewritten messages which can be recalled and inserted into

new text messages when you are short on time.

1. At the start screen, select Menu > > > Messages Text messages Create message.

2. Select Options > Use template.

3. Scroll to one of the available templates, and press Select.

4. Select Send > Send to number , Send to e-mail , Send to many , or Send to distrib.

list ( only when a distribution list has been created) and press Select.

5. Enter the recipient’s phone number or e-mail address, or select Search to

retrieve a number or e-mail address from your contacts list, and select Send.

Messages (Menu 1)

Read and reply

When you receive a message, a notification message and the unopened letter icon

( ) appear in the display.

1. Press Show to read the message, or Exit to move it to your inbox.

When you have unopened messages in your inbox, is shown in the upper

left corner of the start screen as a reminder.

Use the Scroll down key to view the whole message if necessary.

2. Select Reply > Empty screen, Original text, T emplate, or one of the predefined

answers, then compose your reply using the keypad.

3. Press Send.

Options

When you read a text message, some or all of the following options are available:

Delete—Discard the message.

Use number—Choose Add to contact, Send message, or Call.

Save—Save the message to Sent items, Archive, Templates, or a folder you have created.

Forward—Forward the message to another phone number or e-mail address.

Rename—Edit the title of the message.

Reply—Reply to the message. Create the message, and select Options > Send.

The sender’s phone number or e-mail is used as the default.

Resend—Send the message again.

Change sending options

1. At the start screen, select Menu > Messages > > > Text messages Message settings

Sending options to change sending options for all text messages.

2. To change sending options for one message, at the start screen, select Menu >

Messages > Text messages > Create message > Options > Sending options.

3. Select the setting you wish to change:

Priority—Set the priority of the note as Normal or Urgent.

Delivery note—A note is sent to you confirming delivery of the message.

Select On or Off.

Send callback number—A callback number is sent to the recipient. Select Off or

your phone number.

Signature:—Write a Signature to send with text messages, or select Off.

Change message settings

1. At the start screen, select Menu > Messages > > Text messages > Message settings

Other settings.

2. Select the setting you wish to change:

Message font size—Select Small font or Large font.

Message overwriting—Select Sent items only, Inbox only, S. items & Inbox, or Off.

Note: When the message memory is full, your phone cannot send or

receive any new messages. However, you can set your phone to

automatically replace old messages in the Inbox and Outbox folders

when new ones arrive.

Save sent messages—Select Always save, Always prompt, or Off.

Queue msgs.when digital unavailable—Select On, On prompt, or Off. Messages

are stored in the Outbox until they can be sent with digital service.

■Picture messages

Your phone comes with 5 preloaded pictures. You can save more pictures. If necessary,

you can overwrite any of the preloaded pictures. Pictures can be attached to a message

and sent using a text message to compatible phones. Picture messages behave the

same as text messages, but pictures take up more space than text. Pictures are stored

in the Templates folder under Messages > > Text messages Templates.

You cannot send a picture message using e-mail.

Download pictures

Note: This function can be used only if it is supported by your service provider.

Only phones that offer compatible picture message features can receive and

display picture messages. Contact your service provider for details.

Receive and save a picture message

When you receive a picture message, your phone beeps and Message received appears

in the display as well the message icon .

When you have unopened picture messages in your inbox, is shown in the

upper left corner of the start screen as a reminder.

Select Show to view the picture message. If you have more than one picture message,

scroll and select the message you want to view. Use the scroll keys to view the whole

picture if necessary.

Messages (Menu 1)

You can save a received picture in your templates folder by selecting Options > Save

picture Enter a title and select OK. If your templates folder is full of pictures, you can

scroll to the picture you want to replace and select Select.

Compose and send a picture message

One picture message is equivalent in size to three text messages. When you insert a

picture into a message, you will have enough remaining space for about 121 characters

in the message. If you try to insert a picture into a message that is almost full of

text, a beep sounds, and you are prompted to delete some text before proceeding.

1. From the start screen, select Menu > > Messages Text messages > Create

message.

2. Write the message, and select Options > Insert picture.

3. Scroll to a picture, and select View > Insert.

To view another picture, select Back, scroll to another picture, and select

View > Insert.

4. Select Send and enter the phone number of the recipient, or select Find to retrieve

a number from contacts, and select OK.

After a picture has been inserted into your message, you can select Options > Preview,

Change picture, or Delete picture.

■Multimedia messages

A multimedia message can contain text, sound, and a picture. Or a multimedia

message can contain a video clip. Your phone supports multimedia messages that

are up to 300 KB. If the maximum size is exceeded, the phone may not be able to

receive the message. Depending upon your network, you may receive a message that

includes an Internet address where you can go to view the multimedia message.

Pictures are scaled to fit the display area of the phone. Your phone has a multimedia

message viewer for playing messages and a multimedia inbox for storing saved

messages. Once you save the multimedia message, you can use the image as a

screen saver or the sound as a ringing tone.

Important: Multimedia message objects may contain viruses or otherwise

be harmful to your device or PC. Do not open any attachment if you are not

sure of the trustworthiness of the sender.

from being copied, modified, transferred, or forwarded.

Messages (Menu 1)

Select Manual retrieval to choose which messages you want to retrieve to your

inbox. When messages are available, you are notified 1 multimedia message

available, or %N multimedia messages available.

3. If you choose to automatically retrieve messages, you can select Show to read

the multimedia message, or Exit to view them in your inbox later.

If you select to manually retrieve messages, select Show to open the message

notification, and then select Retrieve. Or select Exit to save the notification to

your inbox, and retrieve the message later.

Allow or block advertisements

This setting is not available if multimedia reception is blocked.

From the start screen, select Menu > Messages > Multimedia msgs. > Message

settings> Allow advertisements > Yes or No.

This is a network service. Check with your service provider for more information.

Other MMS settings

Other multimedia settings include saving your messages to the Sent items folder

and editing your connection settings.

From the start screen, select Menu > > Messages Message settings > Multimedia

msgs. and one of the following:

Save sent messages—Select Yes to save sent multimedia messages to the Sent items

folder or No to discard.

Delivery reports—Select On to be informed if the message was delivered or Off to not

be informed.

Default slide timing—Set the default time in mm:ss format for each slide in an MMS

to remain on the screen.

Folders

Your phone has the following folders under Messages > Multimedia msgs.:

Inbox—Contains received multimedia messages.

Outbox—Contains multimedia messages which you have sent and are still waiting to

be transmitted.

Sent items—Contains sent multimedia messages.

Saved items—Contains saved multimedia messages that you can send later.

Delete messages—Delete messages in the Inbox, Outbox, Sent items, or Saved items.

Message settings—Select settings for Save sent messages, Delivery reports, Default

slide timing, Allow multimedia reception, Incoming multi- media messages, and

Allow advertisements.

Write and send multimedia messages

1. From the start screen, select Menu > Messages >Multimedia msgs.>

Create message.

2. Enter the text of your message, and select Options > Insert > Image, Sound clip,

or Video clip.

The list of available folders in the Gallery is shown.

3. Open the desired folder, scroll to the image, sound clip, or video clip, and select

Options > Insert.

The indicator in the header of the message indicates that a picture, sound clip, or

video clip has been attached.

content from being copied, modified, transferred, or forwarded.

4. To add a new page (also called a slide) to the message, select Options >

Insert > Slide.

Each slide can contain text, one image, and one sound clip. If the message

contains several slides, you can open the desired slide by selecting Previous slide,

Next slide, or Slide list.

5. To set the time interval between the slides, select Options >Slide timing, enter

the time interval, and select OK.

6. To move the text to the top or bottom of the message, select Options > Place

text first or Place text last.

7. To insert a name from contacts, select Options > More options > Insert contact,

scroll to the desired name, and select Select.

8. To insert a number, select Options > More options > Insert number, enter the

number or search for it in contacts, and select OK.

9. To insert a calendar note, select Options > Insert > Calendar note.

10. To insert a business card, select Options > > Insert Business card.

11. To delete an image, slide, video clip, or sound clip from the message, select

Options > Delete > Image, Sound clip, Video clip, or Slide.

12. To add a subject to the message, select Options > More options > Edit subject,

enter a subject, and select OK.

Messages (Menu 1)

Call and setup your voice mail

1. Once you have saved the voice mailbox number, press and hold the 1 key.

2. When you connect to voice mail and the prerecorded greeting begins, follow the

service’s automated instructions to setup your voice mail.

Listen to your voice messages

Once you have setup voice mail, you can dial the voice mailbox number in one of

five ways:

• Dial the number using the keypad.

• Press and hold the 1 key.

• Press the 1 key and the Send key.

• Press Listen if there is a notification message in the display.

• At the start screen, select Menu > Messages > Voice messages > Listen to

voice messages.

Once you connect and the prerecorded greeting begins, follow the automated

instructions to listen to your voice messages.

Automate voice mail

You can insert special characters called dialing codes into phone numbers such as

voice mail, and save the number to a 1-touch dialing location. Dialing codes instruct

the receiving system to pause, wait, bypass, or accept the numbers that follow them

in the dialing string.

Note: Voice mail services vary by service provider. The following

instructions are examples of common operations. Please check with your

service provider for specific instructions for using your voice mail service.

Write down voice mailbox number and process

1. Write down your voice mailbox number.

2. Call and check your voice mail as you normally would.

3. Write down your interaction with the recorded prompts step-by-step. Keep in

mind that each voice mail service may vary. However, it should look something

like this:

Dial 8585551212, pause 5 seconds, press 1, pause 2 seconds, press 1234, press

pound key.

Be precise; you will need this information in “Setup voice mail with dialing codes”,

page 36.

Insert dialing codes

Press the * key repeatedly to cycle through dialing codes. Once the desired code

appears in the display, pause briefly and the code is inserted into the dialing string.

The following dialing codes are available:

*—Bypasses a set of instructions.

p—Pauses for 2.5 seconds before sending any numbers that follow.

w—Waits for you to press the Call key before sending the numbers or codes that follow.

Setup voice mail with dialing codes

Note: If the Right selection key on your phone has a network operator

menu, select Menu > Contacts instead of Names.

1. At the start screen, select Names > 1-touch dialing.

2. Scroll to an (empty) 1-touch dialing slot and press Assign.

3. Enter your voice mailbox number, including the area code.

4. Refer to dialing codes and enter any codes as necessary using the information

that you wrote down from “Setup voice mail with dialing codes”, page 36.

For example, if you pause for 5 seconds after connecting to voice mail, enter p

twice after the voice mailbox number, for example, 2145551212pp.

5. Enter any remaining pauses or other information that allows you to listen to

your messages, and press OK.

6. Enter a name (such as Voice Mail), and press OK.

To dial and listen to your voice mail, press and hold the assigned 1-touch dialing key

at the start screen.

■Web messages

Web messaging is a network service. See “Network Services”, page 7 for

more information.

If your wireless service provider supports this feature, you can use the Minibrowser

to check for e-mail messages. At the start screen, select Menu > Messages > Web

messages > Connect.

See “Mobile Web (Menu 9)”, page 83 for more information on using the Minibrowser

in your phone to access web pages.

A single message

To delete a single message, you need to open it first.

1. At the start screen, select Menu > > Messages Text messages.

2. Scroll to the folder containing the message you wish to delete, and press Select.

3. Scroll to the message you wish to delete, and press Select.

4. Select Options > Delete.

5. Press Yes to delete the message or Back to exit.

All messages in a folder

1. At the start screen, select Menu > Messages > Text messages > Delete messages.

2. Scroll to the status of the messages you wish to delete, and press Select:

All—Deletes all messages in all of the folders.

All read—Deletes any messages which have been read in all of the folders.

All unread—Deletes any messages which have not been read in all of the folders.

Mark the folders that have messages you want to delete:

Inbox Inbox—Deletes all messages from the folder.

Sent items—Deletes all messages from the Sent items folder.

Outbox—Deletes all messages from the Outbox folder.

Drafts—Deletes all messages from the Drafts folder.

Archive—Deletes all messages from the Archive folder.

3. Press Done > Yes to empty the marked folder.

Note: Only folders created in My folders can be deleted. The Inbox, Sent

items, Archive, and Templates folders are protected. When you delete a

folder, all messages in the folder are also deleted.

■Voice tags

You can dial up to 25 stored numbers using voice dialing.

Before using voice tags, note that:

• Voice tags are not language dependent. They are dependent on the speaker’s voice.

• You must say the name exactly as you said it when you recorded it.

• Voice tags are sensitive to background noise. Record voice tags and use them in

a quiet environment.

Messages (Menu 1)

• Very short names are not accepted. Use long names and avoid similar names for

different numbers.

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialing in all circumstances.

Assign a voice tag to an entry

Before you can use voice dialing, you must first assign a voice tag to the number.

1. At the start screen, use the Scroll up key or Scroll down key to enter the

contacts list.

2. Highlight the contact you want to assign a voice tag, press Details > Options >

Add voice tag > Start.

3. Speak clearly into the microphone.

Note: Do not press Quit unless you want to cancel the recording.

The phone automatically stops recording and saves and replays the voice tag.

The icon appears next to commands which have voice tags assigned.

If recording is not successful, your phone displays Voice system error. Press Options >

Add voice tag, and repeat Step 3.

Dial a number

1. Press and hold Names.

2. When you hear several beeps and Please speak now appears, release the key.

3. Pronounce the voice tag clearly into the microphone.

When the phone finds the voice tag, Found: appears, and the phone automatically

dials the number. If the phone does not locate a number or recognize the voice

tag, No match found appears.

Voice tags

After you have associated a voice tag to a contact, you can choose one of the

following options:

Play back

1. Select Menu > Contacts > Voice tags.

2. Press Select, then scroll to the name with the voice tag you want to hear.

3. Select Options > Playback.

Call log (Menu 2)

Dialed calls

To view the duration of all dialed calls, at the start screen, select Menu > > Call log

Call timers > Dialed calls’ duration. To view the duration of dialed calls placed while

in the home network or while roaming, select Details > Home or Roaming.

Received calls

To view the duration of all received calls, at the start screen, select Menu > Call log >

Call timers >Received calls' duration for more information. To view the duration of

received calls placed while in the home network or while roaming, select Details >

Home or Roaming.

All calls

At the start screen, select Menu > > > Call log Call timers All calls’ duration.

Life timer

At the start screen, select Menu > > > Call log Call timers Life timer. Some timers,

including the life timer, may be reset during service or software upgrades.

Clear timers

At the start screen, select Menu > > Call log > Call timers Clear timers > OK. Enter your

security code, and press OK. See “Security settings”, page 72 for more information. All

call timers, except the life timer, are reset to zero when Clear timers is selected.

■View duration of data/fax calls

Data/fax calls are a network service. See “Network Services”, page 7 for more

information. If your wireless service provider supports this feature, you can view

the size or duration of sent or received data and fax calls.

Note: The actual time invoiced for calls and services by your service provider

may vary, depending on network features, rounding off for billing, taxes,

and so forth.

1. At the start screen, select Menu > > Call log Data/fax calls.

2. Scroll to one of the following options:

Last sent data/fax—View the size (KB) of the last send data/fax call.

Last received data/fax—View the size (KBKB) of the last received data/fax call.

All sent data/fax—View the size (KB) of all sent data and fax calls.

All received data/fax—View the size (KB) of all received data and fax calls.

Duration of last data/fax call—View the duration time of the last data or fax call.

Duration of all data/fax calls—View the duration time of all calls.

Clear all data/fax logs—Press OK > Yes to clear all data/fax logs.

■View duration of minibrowser

Minibrowser is a network service. See “Network Services”, page 7 for more information.

If your wireless service provider supports this feature, you can view the size or

duration of sent or received data from the Minibrowser.

Note: The actual time invoiced for calls and services by your service provider

may vary, depending on network features, rounding off for billing, taxes,

and so forth.

1. At the start screen, select Menu > > Call log Minibrowser calls.

2. Scroll to one of the following options:

Last sent browser data—View the size (KB) of the last send browser data.

Last received browser data—View the size (KB) of the last received data.

All sent browser data—View the size (KB) of all sent browser data.

All received browser data—View the size (KB) of all received browser data.

Last browser session—View the duration time of the last browser session.

All browser sessions—View the duration time of all browser sessions.

Clear all browser logs—Press OK > Yes to clear all browser logs.

2. Select Details > Options > Add number or Add detail.

If you selected Add number, select General, Mobile, Home, Work, or Fax.

If you selected Add detail, select E-mail, Web address Street address, , or Note.

3. Enter the number or text for the type you have selected, and press OK.

4. To change a number type (General, Mobile, Home, Work, or Fax), select Change

type in the options list.

You can also change which phone number is the default (primary) number for the

contact entry.

1. At the start screen, press the Scroll up key or Scroll down key to select the

number you wish to change, and press Details.

2. Scroll to the number you wish to set as default, and select Options > Set as default.

Set up voice tags

For more information on setting up voice tags and other voice features, see “Voice

tags”, page 38.

Caller groups

You can add contacts list entries to any of five caller groups, and then assign a

unique ringing tone or graphic to that group. This enables you to identify callers

from the group by their unique ringing tone or graphic.

Setup a group

1. At the start screen, press the Scroll up key or Scroll down key to display a list of

entries in your contacts list.

2. Scroll to a name you would like to add to a caller group, and press Details.

3. Select Options > Caller groups.

4. Scroll to the caller group to which you would like to add the name, and press Select.

Options

1. At the start screen, select Names > Caller groups.

Family, VIP, Friends, Business, and Other are the available caller groups.

2. Use the Five-way scroll key to highlight a group, and press Select to display the

following caller group options:

Rename group—Rename the group to your preference.

3. Select one of the following options. Some of the options may be available:

Add voice tag—Highlight a number in your contacts details and add a voice tag

to the contact.

Edit number /Edit detail—Edit an existing phone number or the details attached

to the contact.

Delete number / Delete detail—Delete a phone number or the details attached to

the contact.

Copy number—Copy the number to the UIM (SIM card) from the phone memory

or vice versa.

Use number—Edit the number and and press Options to use the number.

Change type—Change the number type to General, Mobile, Home, Work, or Fax

or the detail type to E-mail, Web address, Street address, or Note.

Set as default—Change the default number of the contact.

Add number—Add a number to the contact.

Add detail—Add an address or note to the contact.

Add image-Add a photo to the contact.

Caller groups—Add the contact to an existing caller group.

Custom tone—Set a ringing tone to the contact different than the default.

Send bus. card—Send the contact as a business card to another phone.

Send message—Create and send the contact a text message.

1-touch dialing—Add the contact to your 1-touch dialing list.

Edit name—Edit the name of the contact.

View name—View the name of the contact.

Delete—Delete the entire contact entry from your contacts list.

4. Edit the option to your preference, and press OK.

■Delete contacts list entries

1. At the start screen, select Names > Delete.

2. To delete individual entries, select One by one.

3. Scroll to the entry you wish to delete, and select Delete > Yes to confirm.

4. To delete the entire contents of your contacts list, select Delete all > Yes.

5. Enter the lock code, and press OK. See “Security settings”, page 72 for

more information.

Camera (Menu 4)

7. Camera (Menu 4)

You can take photos and record video clips with the built-in camera

and adjust its settings. The camera lens is on the front of the phone. The color

display and the mini display on the front of the phone work as a viewfinder. The

camera produces photos in JPEG format and video clips in H.263 (SubQCIF) format.

After you take a picture or video, you can attach it to a multimedia message, send it

with MMS, save it as a wallpaper, save it in a compatible PC using Nokia PC Suite

software, and upload it to a Web address with the content image uploader. When

you attach a picture to an entry in your list of contacts, the picture is displayed

when the contact calls you.

If there is not enough memory to take a new photo, delete old photos or other files

in the gallery.

The Nokia 6255, Nokia 6255i, Nokia 6256, and Nokia 6256i devices support an

image capture resolution of 128 x 160 pixels on the Main display and 96 x 65 pixels

on the Mini display. The image resolutions in these materials may appear different.

■Take a photo

1. Press the Camera key, or at the start screen, select Menu > > > Camera Options

Change mode > and scroll to Standard photo, Portrait photo, Night mode, or

Video and press Select. Or use the Left/Right scroll keys to change mode.

Standard photo-When you want to take normal landscape photos.

Portrait photo—When you want to take a smaller icon-sized, vertical photo,

which can be added to an entry in your contacts list.

Night mode—To take a photo when the lighting is dim and the camera needs a

longer exposure time for the photo to be of good quality

or Video—To record a video.

2. Press Capture to take the photo.

When taking a photo, a shutter sound is heard. The phone saves the photo in the

Images folder of the Gallery menu. The saved photo is shown on the display.

3. Select Back to take another photo, or press Options and choose from one of

the following:

Zoom—Zoom in closer before capturing a photo or get a closer look at the

captured photo; use the Up/Down scroll keys to navigate around the photo.

Send—Select Via multimedia, Via infrared, or Via Bluetooth to send a photo to a

compatible phone or PC.

Rename—Enter or edit the name of the captured photo and press OK.

Open Gallery—Open the Gallery to view saved images, videos, and recordings.

Set contrast—Use the Right or Left scroll keys to adjust the contrast of the

captured photo.

Set as wallpaper—Use a captured photo for wallpaper.

Details—View the Name, Size, Created, Format, Resolution, or Copyright of a

captured photo.

Other options

At the start screen, select Menu > Camera, or press the Camera key and Options:

Change mode—Switch between Standard photo, Portrait photo, Night mode or Video.

Zoom—Zoom in closer before capturing a photo or get a closer look at the captured

photo; use the Up/Down scroll keys to navigate around the photo.

Flash on or Flash off—Select to capture a photo using the flash, or without the flash.

Self-timer—Set a timer to delay capturing a photo for 10 seconds.

Use main display/Use mini display—Change the viewfinder. Use the main display or

the mini display. Use the mini display to take a self-portrait.

View previous—View the previously captured photo.

Open Gallery—Open the Images folder in the Gallery menu.

Settings—Select the Default mode, Image quality, Video clip length, Camera sounds,

Default title, and Image storage.

Self-timer

You can set the timer on the camera to delay for approximately 10 seconds before

capturing the photo.

1. At the start screen, select Menu > > Camera Options > Self-timer.

2. Press Select > Start.

A beep sounds while the self-timer is running, and beeps faster when the camera

is about to capture the photo. After the timeout, the camera takes the photo and

saves the photo in the Images folder of the Gallery menu.

■Record a Video clip

1. From the start screen, select Menu > Camera > Options > Change mode >

Video > Record.

While you are recording, the indicator and the remaining recording time are

shown at the top of the display.

Camera (Menu 4)

2. Select Pause to pause the recording, Continue to resume the recording, or Stop

to stop the recording.

The phone saves the recording in the Video clips folder of the Gallery menu.

3. Select Back to record another video.

Select Options and one of the following:

Delete—Delete the video clip.

Send—Send the video clip to another device as a multimedia message or using IR

or Bluetooth connectivity.

Rename—Rename the video clip.

Open Gallery—Go to the Video clips folder in the gallery.

Mute audio or Unmute audio—Turn the sound on or off.

Set contrast—Increase or decrease contrast of the selected video using the

Scroll right and Scroll left keys.

Details—View details of the selected video, such as name, size, time and date

created, length, file format, and copyright information.

■Settings

At the start screen, select Menu > Camera > Options > Settings.

Scroll to one of the following options and press Select:

Default mode—Scroll to Standard photo, Portrait photo, Night mode or or Video as

the default and press Select.

Image quality—Define file compression when saving the image. Scroll to High,

Normal, or Basic and press Select. High has the least file compression and provides

the best image quality, but takes more memory.

Video clip length—Scroll to Default or Maximum and press Select. The maximum is

approximately 4 minutes depending on conditions. Only video clips that are default

length or shorter can be sent in a multimedia message.

Camera sounds—Scroll to On or Off and press Select.

Default title—Select Automatic to use a predefined title orMy titleto key in or edit a

new title.

Image storage—Select Default folder or Other folder and press Select. This option is

available on when using a multimedia card.

9. Media (Menu 6)

■Media player

With the media player you can download, view, and play compatible images, audio

and video files, and animated images from a variety of sources.

The media player allows you to play streaming videos and streaming audio from a

network server. Streaming functionality is a network service and requires network

support. Check the availability of these services, pricing, and tariffs with your network

operator or the service provider whose service you wish to use. Service providers will

also give you instructions on how to use their services.

From the start screen, select Menu > > Media Media player and one of the following:

Online media—Connects to the operator’s network. This is a network service.

Check with your service provider for pricing and information.

Open Gallery—Open the gallery. From the gallery, you can play stored audio and

video files. See “Gallery (Menu 5)”, page 54.

Go to address—Enter the address of a mobile Internet service, and select OK.

■Music player

Your phone includes a music player for listening to music or other tracks in MP3 or

AAC format. You can transfer files from a PC to your phone using USB, infrared, or a

Bluetooth connection. To transfer music tracks from a compatible PC and manage

the music tracks and track lists, see the instructions for the Nokia Audio Manager

application in the Nokia PC Suite online help. See “USB data transfer”, page 88;

“Transfer files using Windows Explorer”, page 89; “Infrared”, page 88; and “Bluetooth

connectivity”, page 85 for more information on transferring music tracks to your phone.

Music files stored in the Music player folder are automatically detected and added

to the default playlist. Music files stored elsewhere, such as in a MultiMediaCard

folder, must be defined in the playlist before you can listen to them.

You can listen to the sound files through a compatible headset or the phone

loudspeaker.

You can make or answer a call while using the music player. During a call, the playback

is paused. When the call ends, the music player restarts.

Play music tracks

From the start screen, select Menu > Media > Music player.

The details of the first track on the default track list are shown.

Media (Menu 6)

To play a track, scroll to the track that you want, and select Play or press the Scroll

right key.

To adjust the volume level, use the volume keys on the side of the phone.

To stop the playing, select Stop, or press the Scroll left key.

To skip to the beginning of the next track, press the Scroll down key. To skip to the

beginning of the previous track, press the Scroll up key twice.

To rewind the current track, press and hold the Scroll up key. To fast forward the

current track, press and hold the Scroll down key. Release the key at the position

you want.

Warning: Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing.

Music player settings

From the start screen, select Media > > Music player Options and one of the following:

Track list—View all the tracks available on the track list and play the desired track. To

play a track, scroll to the desired track, and select Play or press the Scroll right key.

Select Options to refresh the track list (for example, after adding new tracks to the

list), and change the track list that is shown when you open the Music player menu

if several track lists are available in the phone.

Play options—Select Random to play the tracks on the track list in random order.

Select Repeat to play the current track or the entire track list repeatedly.

Media equalizer—The equalizer enhances the sound quality when using the music

player by amplifying or attenuating frequency bands. There are five preset equalizer

settings (Normal, Pop, Rock, Jazz, and Classical) and two customizable settings.

Headset/Loudspeaker—With the headset attached, listen to the music player

through a headset or the loudspeaker.

Send—Send music files to a compatible device Via multimedia, Via infrared,

orVia Bluetooth.

Memory status—View used and free memory of Handset and Memory card.

Headset—Listen to the music player through a compatible headset connected to the

phone. When using a compatible headset, you can skip to the next track by pressing

the headset key quickly. To stop the playing, press and hold the headset key.

Warning: When using the stereo headset your ability to hear outside

sounds may be affected. Do not use the stereo headset where it can

endanger your safety.

■Radio

Your phone has an FM radio that also functions as an alarm clock radio. You can

listen to the FM radio on your phone through the hands-free speaker or with a

headset. For FM stereo, connect a compatible music stand or stereo headset to the

connector on the bottom of the phone.

The FM radio uses the wire of the headset as an antenna. A compatible headset

needs to be attached to the device for the FM radio to function properly.

The quality of a radio broadcast depends on coverage of the radio station in that

particular area.

Warning: Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing.

Turn the radio on and off

1. Connect the phone to a compatible headset or music stand.

2. From the start screen, select Menu > Media > Radio.

3. To turn off the radio, press and hold the End key.

Use the radio

With the radio on, select Options and one of the following:

Turn off—Turn off the radio.

Save channel—Save the current station to one of 20 locations.

Automatic tuning:—Briefly press the Scroll up key or the Scroll down key to start

the channel search up or down. Select OK when a channel is found.

Manual tuning:—Press the Scroll up key or the Scroll down key to search in

increments of 0.05 MHz.

Set frequency—Manually enter the frequency of a known radio station.

Delete channel—Delete a saved channel.

Loudspeaker / Headset—Listen to the radio through the speakerphone or through

the headset.

Mono output/Stereo output—Listen to the radio in monaural mode (default) or in

stereo. Stereo output is available through a stereo enhancement.

Rename—Enter a new name for the saved channel, and select OK.

To set the radio frequency, press the * key and use the keypad to enter the frequency

of a known radio station. To tune the radio manually, press the # key; then press the

Scroll up key or the Scroll down key to search in increments of 0.05 MHz.

Media (Menu 6)

To adjust the radio volume, press the Volume up and Volume down keys.

When an application using a browser connection is sending or receiving data, it may

interfere with the radio.

When you place or receive a call, the radio automatically mutes. Once the call is

ended, the radio switches back on.

Save a radio channel

You can save a preset station to any one of 20 locations in memory, and then tune to

that station by pressing the Scroll up key or the Scroll down key with the radio on.

1. With the radio on, press and hold the Scroll up key or the Scroll down key to

start the channel search.

Searching stops when a channel is found.

2. To save the channel, select Options > Save channel.

3. Enter a name for the channel, and select OK.

4. Select an (empty) location to save the channel.

To save an FM station quickly to 1–9 memory locations, press and hold the

corresponding number key while the radio is playing. Then, enter the name of

the channel, and select OK.

■Voice recorder

You can make a short (up to 3 minutes) recording and save it to the Recordings

folder or another folder in the Gallery.

A short press of the Voice/shutter key starts and stops voice memo recorder.

Make a recording

1. From the start screen, select Menu > Media > Voice recorder.

2. To start the recording, select Record.

3. Hold the phone in the normal position near your ear, and record your message.

4. To stop the recording, select Stop.

The recording is saved in the Recordings folder of the Gallery.

5. To replay the latest recording, select Play last recorded.

6. To send the latest recording as a multimedia message or by IR or Bluetooth

connectivity to a compatible phone, select Send last recorded.

Define a storage folder

You can select a folder other than Recordings as the default folder to store your

voice recordings.

1. From the start screen, select Menu > Media > > Voice recorder Select memory.

2. Scroll to a folder in the gallery, and select Options > Select.

Manage recordings

1. From the start screen, select Menu > Media > > Voice recorder Recordings list.

2. Scroll to the Recordings folder or the folder that you have defined for storing

recordings, and select Open.

3. Use the options available in the Gallery.

■Media equalizer

The equalizer enhances the sound quality when using the music player by amplifying

or attenuating frequency bands. There are five preset equalizer settings (Normal, Pop,

Rock, Jazz, and Classical) and two customizable settings.

Activate an equalizer set

From the start screen, select Menu > Media > Media equalizer, scroll to the desired

setting, and select Activate.

Create a custom equalizer set

1. From the start screen, select Menu > Media > Media equalizer.

2. Scroll to Set 1 or Set 2, and select Options > Edit.

The selected set appears in the display with the bar on the

far left highlighted.The bars adjust frequencies, from the

lowest (the leftmost bar) to the highest (the rightmost

bar). The higher the indicator on a particular bar, the

more that frequency is amplified.

3. To adjust the lowest frequency, use the Scroll up and

Scroll down keys to move the indicator up and down on

the bar.

4. To adjust other frequencies, use the Scroll left and Scroll right keys to move to

the other bars.

5. Repeat steps 3 and 4 to adjust the setting for each frequency.

6. When you are finished, select Save.

7. To rename the setting, select Options > Rename, enter a new name, and select OK.

8. To activate the setting, select Activate.

Settings (Menu 7)

10. Settings (Menu 7)

Use this menu to change profiles, main display settings, mini display settings, tone

settings, time and date settings, call settings, phone settings, voice commands,

enhancement settings, security settings, application settings, network settings,

network services, and restore factory settings.

■Profiles

Profiles define how your phone reacts when you receive a call or message, how your

keypad sounds when you press a key, and more. Ringing options, keypad tones, and

other settings for each of the available profiles can be left at their default setting, or

customized to suit your needs. The following profiles are available: Normal, Silent,

Meeting, Outdoor, and Pager.

Profiles are also available for enhancements such as a headset and car kit. See

“Enhancement settings”, page 71 for more information about enhancement profiles.

1. At the start screen, select Menu > Settings > Profiles.

2. Scroll to the profile of your choice, and press Select.

3. Select Activate.

Customize a profile

You can customize any of the profiles a variety of ways.

1. At the start screen, select Menu > > Settings Profiles.

2. Select the profile you wish to customize.

3. Select Customize.

4. Select the option you want to customize (Incoming call alert, Ringing tone,

Ringing volume, Vibrating alert, Message alert tone, Keypad tones, Warning

tones, Alert for, or Profile name).

Note: You cannot rename the Normal profile.

Set a timed profile

Timed profiles can be used to prevent missed calls. For example, suppose you attend

an event that requires your phone be set to Silent before the event starts, but you

forget to return it to Normal until long after the event. A timed profile can prevent

missed calls by returning your phone to the default profile at a time you specify.

Note: Timed profiles can be set up to 24 hours in advance.

1. At the start screen, select Menu > > Settings Profiles.

2. Select the profile you wish to activate and set for timed expiration.

3. Select Timed.

4. Enter the time for the profile to expire, and press OK.

■Main display settings

Wallpaper

You can set your phone to display a background picture (wallpaper) on the start screen.

1. At the start screen, select Menu > > Settings > Main display settings Wallpaper >

Select wallpaper.

2. Highlight the Graphics folder, and press Open.

3. Browse the folder.

4. When you arrive at the image of your choice, select Options > Set as wallpaper.

To activate/deactivate wallpaper, at the start screen, select Menu > Settings > Main

display settings > Wallpaper > On or Off.

Color schemes

You can change the color of some display components in your phone, such as

indicators and signal bars.

1. At the start screen, select Menu > > Settings Main display settings > Color schemes.

2. Scroll to the color scheme of your choice, and press Select.

Choose a banner

Banner is a network service. See “Network Services”, page 7 for more information.

If your wireless service provider supports this feature, you can choose whether the

display shows the operator logo when the phone is in the idle state.

At the start screen, select Menu > Settings > Main display settings > Banner >

Default or Customize.

Menu view

You can change the view of the main menu. The grid view shows menu icons only,

and the list view shows a list of icons with the names.

At the start screen, select Menu > Settings > Main display settings > Menu view >

List or Grid.

Set the time

1. At the start screen, select Menu > > > > Settings Time and date settings Clock

Set the time.

2. Enter the time (in hh:mm format), and press OK.

3. Select am pm or (if 12-hour format is selected).

Time zone

Select your time zone based on Greenwich Mean Time (GMT), plus or minus hours in

your time zone. For example, GMT - 8 is US Pacific time in Los Angeles, CA. GMT

does not include Daylight savings time, so add or subtract accordingly.

Time format

At the start screen, select Menu > Settings > Time and date settings > Clock > Time

format > 24-hour 12-hour or .

Date

Show/hide the date

At the start screen, select Menu > Settings > Time and date settings > Date > Show

date or Hide date.

Set the date

1. At the start screen, select Menu > > > > Settings Time and date settings Date

Set the date.

2. Enter the date, and press OK.

Change the date format

1. At the start screen, select Menu > > > Settings Time and date settings Date.

2. Scroll to the Date separator, and press Select.

3. Select the separator of your choice.

4. Scroll to Date format, and press Select.

5. Select the format of your choice.

Set the auto-update of date and time

Auto-update is a network service. See “Network Services”, page 7 for more information.

If your wireless service provider supports this feature, you can allow the digital

network to set the clock, which is useful when you are out of your home area, for

instance when you have traveled to another network or time zone.

Anykey answer

Anykey answer allows you to answer an incoming call by briefly pressing any key

except the Power key, Right selection key, or key.End

At the start screen, select Menu > > > Settings Call settings Anykey answer > On or Off.

Automatic redial

Occasionally, your network may experience heavy traffic, resulting in a fast busy

signal when you dial. With automatic redial activated, your phone redials the

number (number of times is specified by the network), and notifies you once the

network is available.

At the start screen, select Menu > Settings > Call settings > Automatic redial >

On or Off.

1-touch dialing

You can activate or deactivate 1-touch dialing. At the start screen, select Menu >

Settings > Call settings > 1-touch dialing > On or Off. For more information on

entering 1-touch dialing numbers, see “Set up 1-touch dialing”, page 47.

Automatic update of serivce

Your phone is capable of receiving updates to wireless services sent to your phone

by your service provider.

At the start screen, select Menu > Settings > Call settings > Auto-update of service >

On or Off.

Answer when fold is opened

Set your phone to answer a call when you open the fold. If the setting is off, you

must press the Call key after you open the fold.

At the start screen, select Menu > Settings > Call settings > Answer when fold is

opened > On or Off.

Calling card

If you use a calling card for long distance calls, you can save the calling card

numbers in your phone. Your phone can store up to four calling cards.

Note: Contact your calling card company for more information.

Settings (Menu 7)

Roaming options

You can set your phone to “roam” or search for another network when you are not in

your home area.

1. At the start screen, select Menu > > > Settings Network Roaming options.

2. Select one of the following options:

Home only—You can make and receive calls in your home area only.

Automatic—The phone automatically searches for service in another digital

network. If one is not found, the phone uses analog service. The roaming rate

applies when not in the home service area.

3. Press OK, if necessary, to confirm the activation.

Mode

You can choose whether your phone uses digital or analog service.

1. At the start screen, select Menu > > > Settings Network Mode.

2. Select one of the following service options:

Digital preferred—The phone works in digital mode, but will also work in analog

mode when digital mode is unavailable.

Digital only—The phone only works in digital mode.

Analog only—The phone only works in analog mode.

■Network services

The following features are network services. See “Network Services”, page 7 for

more information.

Store a feature code

1. At the start screen, select Menu > > > Settings Network services Network

feature setting.

2. Enter the feature code from your service provider (for example, *633), and press OK.

3. Select the type of forwarding that matches the feature code you entered

(for example, Call forwarding).

The activated feature code is now stored in your phone, and you are returned to

the Feature code: field. Continue entering other feature codes (for example,

*633), or press the End key to return to the start screen.

Note: Once you enter a network feature code successfully the feature

becomes visible in the Network services menu.

Call forwarding

Call forwarding tells your network to redirect incoming calls to another number.

Call forwarding is a network service and may not work the same in all networks, so

contact your wireless provider for availability.

Activate

Note: This is a network service. All options listed may not appear in the

display. Contact your wireless provider for more information.

1. At the start screen, select Menu > > Settings > Network services Call forwarding.

2. Select one of the following options:

Forward all calls—Forward all calls to the number you specify.

Forward if busy—Forward incoming calls when you are in a call.

Forward if not answered—Forward incoming calls to another number if you are

unable to answer. You can set a delay before forwarding takes place.

Forward if out of reach—Forward incoming calls when your phone is off.

Cancel all call forwarding—Cancel any call forwarding options you have set.

3. Select Activate.

4. Scroll to the destination to which your calls will be forwarded, and press Select.

5. Enter the number to which your calls, data, or other information will be

forwarded, and press OK.

Cancel

At the start screen, select Menu > Settings > Network services > Call forwarding >

Cancel all call forwarding.

Note: Cancel all call forwarding may affect your ability to receive voice mail

messages. Contact your wireless provider for specific details.

Call waiting

If your wireless provider supports this feature, call waiting notifies you of an

incoming call even while you are in a call. You can then accept, reject, or ignore the

incoming call.

1. At the start screen, select Menu > > > > Settings Network services Call waiting

Activate or Cancel.

2. During a call, press Answer or the Call key to answer the waiting call.

The first call is put on hold.

3. Press the End key to end the active call.

Settings (Menu 7)

Send own caller ID when calling

If your wireless service provider supports this feature, then you can prevent your

number from appearing on the receiving party’s caller ID.

At the start screen, select Menu > Settings > > Network services Send my caller ID >

Yes or No.

View your own phone number

At the start screen, select Menu > > > Settings Network services Own number selection.

■Restore factory settings

You can reset some of the menu settings to their original values. Data that you have

entered or downloaded is not deleted, for example, entries in your contacts list are

not affected.

1. At the start screen, select Menu > > Settings Restore factory settings.

2. Enter the lock code, and press OK. See “Security settings”, page 72 for more

information.

■Choose ’Go to’ funtions

Note: Go to is the Left selection key on the start screen.

1. At the start screen, select Go to > > Options Select options.

2. Use the Scroll up key or Scroll down key to highlight the desired functions from

the list of available functions.

3. Press Mark to add a function. Use Unmark to remove a function.

4. Select Done when you have added all desired functions.

5. Select Yes to save the changes.

6. At the start screen, press Menu > Go to to display a list of the functions that you

selected in step 3.

Organize functions

1. At the start screen, select Go to > > Options Organize.

2. Use the Scroll up key or the Scroll down key to highlight the function you wish

to rearrange, and select Move.

3. Select Move up, Move down, Move to top, or Move to bottom.

4. Press Done > Yes to save the changes.

Organizer (Menu 8)

If the alarm time is reached while the device is switched off, the device switches

itself on and starts sounding the alarm tone. If you press Stop, the device asks

whether you want to activate the device for calls. Press No to switch off the device

or Yes Yes to make and receive calls. Do not press when wireless phone use may

cause interference or danger.

Turn an alarm off

At the start screen, select Menu > > Organizer > Alarm clock Alarm time > Off.

■Calendar

The calendar keeps track of reminders, calls you need to make, meetings, and

birthdays. It can even sound an alarm for any of these events.

Monthly view provides an overview of the selected month and weeks. It also allows

you to jump to a specific date. Any days or dates that appear in bold font contain

calendar notes such as a meeting or reminder.

Open

At the start screen, select Menu > Organizer > Calendar.

Go to a date

1. At the start screen, select Menu > > > > Organizer Calendar Options Go to date.

2. Enter the date (for example, 07/15/2004), and press OK.

Note a specific date

You can choose from five types of notes: Meeting, Call, Birthday, Memo, and

Reminder. Your phone asks for further information depending on which note you

choose. You also have the option to set an alarm for any note that you select.

1. Go to the date for which you want to set a reminder. See “Go to a date”, page 79

in the previous section if you need more information.

2. From the monthly view (with the go to date highlighted), select Options >

Make a note.

3. Select one of the following note types:

Meeting—You are prompted to enter a subject, location, and a start/end time.

You are then given the option to set an alarm.

Call—You are prompted to enter a phone number, a name, and the time. You are

then given the option to set an alarm.

Birthday—You are prompted to enter the person’s name, and year of birth. You are

then given the option to set an alarm.

Organizer (Menu 8)

Send a note

1. At the start screen, select Menu > > Organizer Calendar.

2. Scroll to the date containing the note you wish to send. (Any days containing

notes will be in bold font.)

3. Select Options > View day.

4. Scroll to the note you wish to send, and select Options > Send note > Via calendar,

Via text message, Via infrared, or Via Bluetooth.

5. If you selected Via calendar, enter the number for the recipient, or press Search

to retrieve a number from the contacts list, and press OK. The note is sent.

6. If you selected Via text message, the note appears as a text message in the display.

7. Select Send to number, Send to e-mail, or Send to many.

8. Enter the number for the recipient, or press Search to retrieve a number from the

contacts list, and press OK. Select Options > Send.

Receive notes

When you receive a calendar note in calendar-to-calendar (vCal) format, your phone

displays Calendar note received. When you receive a calendar note as a text message,

a message notification appears on the start screen. You can then save the note in

your calendar and set an alarm for any date and time.

View notes

When your phone displays Calendar note received, press Show. Scroll to view the

entire message, if necessary.

Save notes

After viewing the calendar note, select Options > Save.

Discard notes

After viewing the calendar note, select Options > Discard.

■To-do list

Use the to-do list feature to keep track of your tasks. You can save a note for a task,

select a priority level for the note and mark it as done when you have completed it.

You can sort the notes by priority or by date.

Add a To-do note

1. From the start screen, select Organizer > To-do list.

2. If there are no notes, select Add note.

3. Or, enter the subject of the to-do note, and select Save.

4. Select either High, Medium, or Low priority.

The to-do note is saved. The phone automatically sets the deadline.

View a To-do note

From the start screen, select Organizer > To-do list. Scroll to a to-do note, and select

View. The to-do note appears in the display.

Options while viewing to-do notes

Add—Add another note (available only in header view).

Deadline—Set a deadline for the note (available only in body view).

Delete—Delete the note.

Mark note as done—Mark a note or task as complete; no more reminders will follow.

Sort by deadline—Sort the notes according to their deadline.

Send note—Send the note to another device using IR or Bluetooth, as a text or

multimedia message, or as a calendar note to another compatible phone.

Edit priority—Change the priority to high, medium, or low (available only in body view).

Go to calendar—Leave the to-do list, and go to the calendar.

Save to calendar—Save the to-do note to a date on your calendar.

Delete all notes—Delete all the to-do notes in the list (available only in header view).

■Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root and converts currency values.

1. At the start screen, select Menu > > Organizer Calculator.

2. Enter the first number in the calculation. (Press the # key for a decimal point

if necessary.)

To perform a square or square root calculation, select Options > Square or

Square root.

3. Press the * key to cycle through the add (+), subtract (-), multiply (*), and divide (/)

characters. Pause briefly to select the displayed character.

4. Enter the second number in your calculation.

5. Press Options (equals is highlighted), and press Select.

Mobile Web (Menu 9)

12. Mobile Web (Menu 9)

Minibrowser is a network service. See “Network Services”, page 7 for

more information.

Your phone has a built-in browser you can use to connect to selected services on the

mobile internet. If your wireless service provider supports this feature, then you can

view weather reports, check news or flight times, view financial information, and

much more. The web browser on your phone can display WAP-based content.

Your device may have some bookmarks loaded for sites not affiliated with Nokia.

Nokia does not warrant or endorse these sites. If you choose to access them, you

should take the same precautions, for security or content, as you would with any

internet site.

The security icon does not indicate that the data transmission between the gateway

and the content server (or place where the requested resource is stored) is secure.

The service provider secures the data transmission between the gateway and the

content server.

■Mobile internet access

Because mobile internet content is designed to be viewed from your phone, your

wireless provider is now your mobile internet service provider as well.

It is likely that your wireless provider has created a home page and set up your

browser to go to this page when you log on to the mobile internet. Once at your

service provider’s home page, you may find links to a number of other sites.

It should not be necessary to manually configure the browser on your phone.

Normally this is done by your wireless provider once you have subscribed to the

feature. Contact your wireless provider if you have problems using the browser.

■Sign on to the mobile internet

At the start screen, select Menu > Mobile Web > Minibrowser > . Connect

After a brief pause, your phone attempts to connect to your wireless provider’s home

page. If you receive an error message, your phone may not be set up for browsing.

Contact your wireless provider to make sure that your phone is configured properly.

■Navigate the mobile internet

Since your phone screen is much smaller than a computer screen, mobile internet

content is displayed differently than you may be accustomed to seeing. This section

contains guidelines for using phone keys to navigate a WAP site.

Phone keys

• To display the Minibrowser home screen, press the Power key.

• To browse the WAP site, press the Scroll up or Scroll down key.

• To select a highlighted item, press Select.

• To enter letters and numbers, press a key from 0–9.

• To enter special characters, press the * key.

Receive a call while online

Depending on your wireless service provider, you may still be able to receive a voice

call while using the WAP browser.

• To answer the incoming call, press the Call key.

• To reject the incoming call, press the End key.

After you end your voice call, the mobile internet connection automatically resumes.

Note: If your wireless service provider does not support incoming calls

while browsing, then the incoming calls are automatically diverted to

voice mail.

Make an emergency call while online

You can end your data connection and then make an emergency call.

1. To close your mobile internet connection, simply press the End key.

2. Press the End key as many times as needed to clear the display and ready the

phone for calls.

3. Enter the emergency number for your present location (for example, 911).

Emergency numbers vary by location.

4. Press the Call key.

Connectivity (Menu 10)

13. Connectivity (Menu 10)

You can connect the phone to a compatible device using an IR or

Bluetooth connection. You can also connect the phone to a compatible PC using IR,

Bluetooth, or a data cable; and use the phone as a modem to enable connectivity

from the PC.

For more information, see the Nokia PC Suite online help. Nokia PC Suite and all

related software can be downloaded from the U.S. Mobile Phone products section

of www.nokia.com.

■Bluetooth connectivity

Bluetooth connectivity enables cost-free wireless connections between electronic

devices within a maximum range of 30 feet. A Bluetooth connection can be used to

send and receive images, texts, gallery files, voice recordings, video clips, notes,

business cards, and calendar notes. It can also be used to connect wirelessly to

products that use Bluetooth wireless technology, such as computers. You can

synchronize your phone and your PC using a Bluetooth connection.

Since devices with Bluetooth connectivity communicate using radio waves, your

phone and the other device do not need to be in direct line-of-sight.

The two devices only need to be within a maximum of 30 feet (10 meters) of each

other, although the connection can be subject to interference from obstructions

such as walls or from other electronic devices.

The Bluetooth application consumes the battery and reduces the operating time of

the phone. Take this into account when performing other operations with your phone.

There may be restrictions on using devices with Bluetooth connectivity. Check with

your local authorities.

These devices are compliant with Bluetooth specification 1.1 supporting the

following profiles:

• Object push profile (OPP)

• File transfer profile (FTP)

• Dial-up networking profile (DUN)

• Generic object exchange profile (GOEP)

• Headset profile (HSP)

• Hands-free profile (HFP)

Connectivity (Menu 10)

Transfer files using Windows Explorer

You can use Windows Explorer to transfer music, photo, and video files to your

phone, and from your phone to your PC.

1. Connect your PC and your phone with a DKU-2 USB cable.

Data enhancement connected is displayed on your phone.

2. Open Windows Explorer. Your phone will appear as a local drive (named by Nokia

6255, Nokia 6255i, Nokia 6256, or Nokia 6256i), and with a drive letter assigned

to it.

3. Click on the folders to display a window that shows the contents of the folder on

the phone memory card.

4. Open a second instance of Windows Explorer and display the contents of the

folder on your PC where you have MP3 files, photo files, or video files stored.

5. Select the files on your PC that you wish to transfer to the phone.

6. Drag and drop the files from the second window into the first window and place

in a folder.

7. The files are transferred to the phone and can be played by the Music player, or

accessed by the Media player.

8. If you selected files with more memory than can fit on the phone memory, you

get an error note. Deselect some of your selected files until the selection fits.

9. Disconnect the USB cable by double-clicking the green arrow on the taskbar at

the bottom of your PC screen.

A window pops up that shows Unplug or Eject Hardware.

10. Click on USB Device in the Hardware devices window.

A popup window shows Stop a Hardware device.

11. Highlight USB device and click OK.

The popup window Safe to Remove Hardware is shown with the message

“The ‘USB Device’ device can now be safely removed from the system.

12. Click OK.

Important: To ensure that all memory card operations are completed in a

controlled way, do not unplug the connectivity cable until Windows notifies

you that it is safe to do so. Uncontrolled completion of the memory card

operations may cause the memory card and the information stored on it to

become corrupted. A corrupted memory card may have to be formatted before

it can be used again. When a memory card is formatted, all information on

the card is permanently lost.

Important: Note that even if the use of certificates makes the risks involved

in remote connections and software installation considerably smaller, they

must be used correctly in order to benefit from increased security. The existence

of a certificate does not offer any protection by itself; the certificate manager

must contain correct, authentic, or trusted certificates for increased security

to be available. Certificates have a restricted lifetime. If Expired certificate

or Certificate not valid yet is shown even if the certificate should be valid,

check that the current date and time in your device are correct. Before

changing any certificate settings, you must make sure that you really trust

the owner of the certificate and that the certificate really belongs to the

listed owner.

PC Suite

Nokia PC Suite software is available for the Nokia 6255, 6255i, 6256, and 6256i phone.

Nokia PC Suite is a collection of powerful tools that you can use to manage your

phone features and data. Each component is a separate program that includes online

helps. Nokia PC Suite software, installation instructions, and other documentation is

provided free of charge and can be downloaded from the software downloads of the

Nokia web site: www.nokia.com/us.

Note: Some of the features in your phone require network support. Contact

your service provider for availability and configuration instructions.

Memory status

You can view the size of memory available application installations. At the start

screen, select Menu > Extras > Applications > Memory.

Reference information

Care and maintenance

Your device is a product of superior design and craftsmanship and should be treated

with care. The suggestions below will help you protect your warranty coverage.

• Keep the device dry. Precipitation, humidity and all types of liquids or moisture can

contain minerals that will corrode electronic circuits. If your device does get wet,

remove the battery and allow the device to dry completely before replacing it.

• Do not use or store the device in dusty, dirty areas. Its moving parts and

electronic components can be damaged.

• Do not store the device in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries, and warp or melt certain plastics.

• Do not store the device in cold areas. When the device returns to its normal

temperature, moisture can form inside the device and damage electronic

circuit boards.

• Do not attempt to open the device other than as instructed in this guide.

• Do not drop, knock, or shake the device. Rough handling can break internal

circuit boards and fine mechanics.

• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean

the device.

• Do not paint the device. Paint can clog the moving parts and prevent

proper operation.

• Use a soft, clean, dry cloth to clean any lenses (such as camera, proximity sensor,

and light sensor lenses).

• Use only the supplied or an approved replacement antenna. Unauthorized

antennas, modifications, or attachments could damage the device and may

violate regulations governing radio devices.

All of the above suggestions apply equally to your device, battery, charger, or any

enhancement. If any device is not working properly, take it to the nearest authorized

service facility for service.

Additional safety information

■Operating environment

Remember to follow any special regulations in force in any area and always switch

off your device when its use is prohibited or when it may cause interference or

danger. Use the device only in its normal operating positions. This device meets RF

exposure guidelines when used either in the normal use position against the ear of

when positioned at least 7/8 inch (2.2 cm) away from the body. When a carry case,

belt clip, or holder is used for body-worn operation, it should not contain metal and

should position the device at least 7/8 inch (2.2 cm) away from your body.

In order to transmit data files or messages, this device requires a quality connection

to the network. In some cases, transmission of data files or messages may be

delayed until such a connection is available. Ensure the above separation distance

instructions are followed until the transmission is completed.

■Medical devices

Operation of any radio transmitting equipment, including wireless phones, may

interfere with the functionality of inadequately protected medical devices. Consult

a physician or the manufacturer of the medical device to determine if they are

adequately shielded from external RF energy or if you have any questions. Switch off

your device in health care facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care facilities may be using equipment that

could be sensitive to external RF energy.

PACEMAKERS

Pacemaker manufacturers recommend that a minimum separation of 6 in (15.3 cm)

be maintained between a wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations are consistent with the

independent research by and recommendations of Wireless Technology Research.

To minimize the potential for interference, persons with pacemakers should

• Always keep the device more than 6 inches (15.3 cm) from their pacemaker

when the device is switched on

• Not carry the device in a breast pocket

• Hold the device to the ear opposite the pacemaker to minimize the potential

for interference.

If you have any reason to suspect that interference is taking place, switch off your

device immediately.

Reference information

HEARING AIDs

Some digital wireless devices may interfere with some hearing aids. If interference

occurs, consult your service provider.

■Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems

in motor vehicles such as electronic fuel injection systems, electronic antiskid

(antilock) braking systems, electronic speed control systems, air bag systems. For

more information, check with the manufacturer or its representative of your vehicle

or any equipment that has been added.

Only qualified personnel should service the device, or install the device in a vehicle.

Faulty installation or service may be dangerous and may invalidate any warranty

that may apply to the device. Check regularly that all wireless device equipment in

your vehicle is mounted and operating properly. Do not store or carry flammable

liquids, gases, or explosive materials in the same compartment as the device, its

parts, or enhancements. For vehicles equipped with an air bag, remember that an air

bags inflate with great force. Do not place objects, including installed or portable

wireless equipment in the area over the air bag or in the air bag deployment area.

If in-vehicle wireless equipment is improperly installed and the air bag inflates,

serious injury could result.

■Potentially explosive environments

Switch off your device when in any area with a potentially explosive atmosphere

and obey all signs and instructions. Potentially explosive atmospheres include areas

where you would normally be advised to turn off your vehicle engine. Sparks in such

areas could cause an explosion or fire resulting in bodily injury or even death. Switch

off the device at refuelling points such as near gas pumps at service stations. Observe

restrictions on the use of radio equipment in fuel depots, storage, and distribution

areas, chemical plants or where blasting operations are in progress. Areas with a

potentially explosive atmosphere are often but not always clearly marked. They

include below deck on boats, chemical transfer or storage facilities, vehicles using

liquefied petroleum gas (such as propane or butane), and areas where the air contains

chemicals or particles such as grain, dust or metal powders.

FCC regulations prohibit using your wireless device while in the air. The use of wireless

telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt

the wireless telephone network, and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone

services to the offender, legal action, or both.

Reference information

■Certification Information (SAR)

THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE

TO RADIO WAVES.

Your mobile device is a radio transmitter and receiver. It is designed and manufactured

not to exceed the limits for exposure to radio frequency (RF) energy adopted by the

governments of the USA through the Federal Communications Commission (FCC)

and Canada through Industry Canada (IC). These limits establish permitted levels of

RF energy for the general population. The guidelines are based on standards that

were developed by independent scientific organizations through periodic and

thorough evaluation of scientific studies. The standards include a substantial safety

margin designed to assure the safety of all persons, regardless of age and health.

The exposure guidelines for mobile devices employ a unit of measurement known as

the Specific Absorption Rate or SAR. The SAR limit adopted by the USA and Canada

is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The limit incorporates a

substantial margin of safety to give additional protection for the public to account

for any variations in measurements. Tests for SAR are conducted using standard

operating positions with the device transmitting at its highest certified power level

in all tested frequency bands. The actual SAR level of an operating device can be

well below the maximum value because the device is designed to use only the power

required to reach the network. That amount changes depending on a number of

factors such as how close you are to a network base station.

The highest SAR value reported to the FCC and IC for this device type when tested

for use at the ear is 1.27W/kg, and when properly work on the body is 0.78W/kg. SAR

information on file with the FCC can be found under the Display Grant section of

http://www.fcc.gov/oet/fccid after searching on FCC ID QMNRM-19. SAR values

reported in other countries may vary depending on differences in reporting and

testing requirements and the network band. Additional SAR information may be

provided under product information at www.nokia.com.

Reference information

e) Nokia will repair the Product under the limited warranty within 30 days after

receipt of the Product. If Nokia cannot perform repairs covered under this

limited warranty within 30 days, or after a reasonable number of attempts to

repair the same defect, Nokia at its option, will provide a replacement Product

or refund the purchase price of the Product less a reasonable amount for usage.

In some states the Consumer may have the right to a loaner if the repair of

the Product takes more than ten (10) days. Please contact the Customer

Service Center at Nokia at the telephone number listed at the end of this

warranty if you need a loaner and the repair of the Product has taken or is

estimated to take more than ten (10) days.

f) If the Product is returned during the limited warranty period, but the

problem with the Product is not covered under the terms and conditions of

this limited warranty, the Consumer will be notified and given an estimate of

the charges the Consumer must pay to have the Product repaired, with all

shipping charges billed to the Consumer. If the estimate is refused, the

Product will be returned freight collect. If the Product is returned after the

expiration of the limited warranty period, Nokia’s normal service policies

shall apply and the Consumer will be responsible for all shipping charges.

9. You (the Consumer) understand that the product may consist of refurbished

equipment that contains used components, some of which have been

reprocessed. The used components comply with Product performance and

reliability specifications.

10. ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR

PURPOSE OR USE, SHALL BE LIMITED TO THE DURATION OF THE FOREGOING

LIMITED WRITTEN WARRANTY. OTHERWISE, THE FOREGOING LIMITED WARRANTY

IS THE CONSUMER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED. NOKIA SHALL NOT BE LIABLE FOR

SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, INCLUDING

BUT NOT LIMITED TO LOSS OF ANTICIPATED BENEFITS OR PROFITS, LOSS OF

SAVINGS OR REVENUE, LOSS OF DATA, PUNITIVE DAMAGES, LOSS OF USE OF

THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, COST OF CAPITAL, COST OF

ANY SUBSTITUTE EQUIPMENT OR FACILITIES, DOWNTIME, THE CLAIMS OF ANY

THIRD PARTIES, INCLUDING CUSTOMERS, AND INJURY TO PROPERTY, RESULTING

FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM BREACH OF

THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT TORT, OR ANY

OTHER LEGAL OR EQUITABLE THEORY, EVEN IF NOKIA KNEW OF THE LIKELIHOOD

OF SUCH DAMAGES. NOKIA SHALL NOT BE LIABLE FOR DELAY IN RENDERING

SERVICE UNDER THE LIMITED WARRANTY, OR LOSS OF USE DURING THE PERIOD

THAT THE PRODUCT IS BEING REPAIRED.

Mensajes (Menú 1)

No—Bloquea la recepción de todos los mensajes.

Sistema doméstico—Permite la recepción de mensajes sólo si se encuentra en el

área de cobertura de su proveedor de servicio. Esta función es un servicio de red.

Consulte con su proveedor para más información.

2. Elija Mensajes multimedia entrantes > Recuperar para recuperar automáticamente

todos los mensajes en su Buzón de entrada. Cuando entren nuevos mensajes, se

le avisará Mensaje multimedia recibido, o Mensajes multimedia recibidos.

Elija Recuperación para escoger los mensajes que quiera obtener de su Buzón de

entrada. Cuando los mensajes estén disponibles, se le avisará 1 mensaje multimedia

disponible, o %N mensajes multimedia disponibles.

3. Si opta por recuperar los mensajes automáticamente, puede elegir Mostrar para

leer el mensaje multimedia, o Salir para verlos después en su buzón de entrada.

Si opta por recuperar los mensajes manualmente, elija Mostrar para abrir el

aviso de mensaje, y luego elija Recuperar. O bien, elija Salir para guardar el aviso

en su buzón de entrada y recuperar el mensaje en otro momento.

Permitir o bloquear publicidad

Esta configuración no está disponible si la recepción multimedia está bloqueada.

En la pantalla inicial, elija Menú > Mensajes > Mensajes multimedia > Configuraciones

de mensajes > Permitir publicidad > Sí o No.

Esta función es un servicio de red. Consulte con su proveedor para más información.

Otras configuraciones MMS

Entre otras configuraciones multimedia se incluyen el guardar sus mensajes en la

carpeta Elementos enviados y editar sus configuraciones de conexión.

En la pantalla inicial, elija Menú > Mensajes > Configuraciones de mensajes >

Mensajes multimedia. Elija cualquiera de los siguientes:

Guardar mensajes enviados—Elija Sí para guardar mensajes multimedia a la carpeta

Elementos enviados, o No para descartar.

Informes de entregas—Elija Activar para que le informe si el mensaje fue entregado,

o Desactivar para que no le informe.

Programación diapositiva pred.—Configure la programación predeterminada en

formato mm:ss para cada diapositiva en un MMS para permanecer en la pantalla.

Produktspecifikationer

Varumärke:	Nokia
Kategori:	Mobiltelefoner
Modell:	6256

Behöver du hjälp?

Om du behöver hjälp med Nokia 6256 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Mobiltelefoner Nokia Manualer

Nokia 6500 Classic Bruksanvisning

19 Oktober 2024

Nokia 6360 Bruksanvisning

25 Juli 2024

Nokia 6256 Bruksanvisning

23 Juli 2024

Mobiltelefoner Manualer

Nyaste Mobiltelefoner Manualer

Kiano Elegance 5.5 Bruksanvisning

3 April 2025

Maxwest Ranger R3 Bruksanvisning

6 Februari 2025

Maxwest Gravity 6 Bruksanvisning

6 Februari 2025

Maxwest Gravity 5.5 Bruksanvisning

6 Februari 2025

HTC Desire HD Bruksanvisning

9 Januari 2025

Umidigi A9 Pro Bruksanvisning

9 Januari 2025

Umidigi Z2 Pro Bruksanvisning

9 Januari 2025

Yarvik Ingenia Horizon SMP50-200 Bruksanvisning

9 Januari 2025

HTC Desire 628 Bruksanvisning

21 Oktober 2024

LG GS105 Bruksanvisning

21 Oktober 2024