Numark WS100 Bruksanvisning

Numark mikrofon WS100

Läs nedan 📖 manual på svenska för Numark WS100 (24 sidor) i kategorin mikrofon. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/24
User Guide
English ( 2 – 5 )
Guía del usuario
Español ( 6 – 9 )
Guide d'utilisation
Français ( 10 – 13 )
Guida per l'uso
Italiano ( 14 – 17 )
Benutzerhandbuch
Deutsch ( 18 – 21 )
Appendix
English ( 22 – 23 )
2
S
p
eakers
Powe
r
User Guide (English)
Introduction
Box Contents
WS100 Microphone Transmitter
WS100 Receiver
Carrying Case
1/4” (6.35 mm) cable
Power Adapter
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit numark.com.
For additional product support, visit numark.com/support.
Setup
Connection
Here is just an example of how to use your WS100 in your setup. Items not listed in
Introduction > Box Contents are sold separately.
Mixe
r
WS1
WS1
WS1
WS1WS1
00
00
00
00
00
3
Setting Up the Microphone Transmitter
1. Remove the micropho cover and insert 2 AA ne transmitter’s battery compartment
batteries into compartment. Make sure the polarities of the batteries (+ and –) are correct.
2. Reattach the battery compartment cover.
3. Slide the power switch into the on position. The power indicator will flash briefly to
indicate the microphone transmitter is on.
Setting Up the Receiver
1. For best results, place the receiver at least 3 feet (1 meter) above the ground and place
the antennae in a vertical position.
2. Use the included power adapter to connect the receiver’s power input to a power outlet.
3. Use a standard 1/4” (6.35 mm) cable to connect one of the receiver’s audio outputs to
your mixer or PA system. Do not use both audio outputs at the same time; this can result
in signal loss or increased noise.
4. Press the power button to turn the receiver on.
5. If the microphone transmitter is on, the receiver’s RF indicator will light to show that the
two devices are connected and within range. The receiver and microphone transmitter
are pre-programmed to operate on a regional fixed frequency.
6. Adjust the volume knob to set the audio signal level sent from the audio output to your
mixer or PA system.
Features
Microphone Transmitter
1. Grille: This cover protects the microphone capsule and reduces
noise from air and breath.
2. Power Switch: This three-position switch turns the transmitter on
or off.
i. The transmitter is off.
ii. The transmitter is on, but the audio signal is muted.
iii. The transmitter is on and sending audio to the receiver.
3. Power Indicator: This LED will flash briefly when the power
switch is moved into the on position.
4. Battery Compartment: Insert 2 AA batteries into the
compartment. Make sure the polarities of the batteries (+ and –)
are correct.
W
W
W
W
WS1
S1
S1
S1S100
00
00
00
00
4
3
2
1

Produktspecifikationer

Varumärke: Numark
Kategori: mikrofon
Modell: WS100

Behöver du hjälp?

Om du behöver hjälp med Numark WS100 ställ en fråga nedan och andra användare kommer att svara dig


mikrofon Numark Manualer

Numark

Numark WS100 Bruksanvisning

17 Augusti 2024

mikrofon Manualer

Nyaste mikrofon Manualer

Austrian Audio

Austrian Audio OC16 Bruksanvisning

19 Mars 2025
Kenwood

Kenwood KMC-66 Bruksanvisning

18 Mars 2025
Kenwood

Kenwood KMC-70 Bruksanvisning

18 Mars 2025
Kenwood

Kenwood KMC-32 Bruksanvisning

18 Mars 2025
Comica

Comica Vimo C2 Bruksanvisning

12 Mars 2025
Louroe Electronics

Louroe Electronics Verifact B Bruksanvisning

10 Mars 2025
Louroe Electronics

Louroe Electronics Verifact C Bruksanvisning

10 Mars 2025
Louroe Electronics

Louroe Electronics Verifact K Bruksanvisning

10 Mars 2025
Louroe Electronics

Louroe Electronics C-ML Bruksanvisning

10 Mars 2025
Louroe Electronics

Louroe Electronics Verifact L-DT Bruksanvisning

10 Mars 2025