Oki Microline 321 Turbo Bruksanvisning

Oki Skrivare Microline 321 Turbo

Läs nedan 📖 manual på svenska för Oki Microline 321 Turbo (37 sidor) i kategorin Skrivare. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/37
Chapter 1
Printer Unpacking & Setup
Choose a sturdy table, desk or printer stand to place your printer on when you remove it from
the carton. Remove the styrofoam sides be sure to save all packing materials in case you need
to ship the printer again and check the box for these contents:
1) ML320/321 printer
2) Paper separator
3) Power cord
4) Platen knob
5) Ribbon cartridge
Note: Interface cable and paper are sold separately.
If any of these items is missing or damaged, see your dealer for a replacement.
ML 320/321 ( 96-02-01 )
Setup Preliminaries
Preliminaries
Don't plug the printer in until its set up and ready to operate.
If there is clear protective film on the access cover, remove the film. Open the access cover
and remove the shipping retainer (1). Be sure to save it with the other packing materials in
case you ship the printer.
ML 320/321 ( 96-02-01 )
Install The Paper Separator and Platen Knob
Install The Paper Separator and Platen Knob
Open the rear cover of the printer (2). Holding the legs closed against the paper separator,
place the tab on one side of the separator over the stud on the side of the rear cover (3).
Pull gently on the other tab to slide it over the stud on the other side of the rear cover. Then
close the rear cover. Insert the platen knob on the right side of the printer (4). Match the
flatside of the knob to the flat side of the platen shaft.
ML 320/321 ( 96-02-01 )

Produktspecifikationer

Varumärke: Oki
Kategori: Skrivare
Modell: Microline 321 Turbo

Behöver du hjälp?

Om du behöver hjälp med Oki Microline 321 Turbo ställ en fråga nedan och andra användare kommer att svara dig




Skrivare Oki Manualer

Skrivare Manualer

Nyaste Skrivare Manualer