Oregon Scientific RMR112 Bruksanvisning

Oregon Scientific Termometer RMR112

Läs nedan 📖 manual på svenska för Oregon Scientific RMR112 (11 sidor) i kategorin Termometer. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/11

Multi-Channel IN-OUT Thermometer

with Cable Free Sensor and RF Clock

MODEL: RMR112

USER'S MANUAL

INTRODUCTION

Congratulations on your purchase of the RMR112 Multi-Channel

In-Out Thermometer with 433MHz cable free sensor and

radio-controlled calendar clock.

The basic package comes with a main unit, which is the

temperature and calendar clock station, and a remote unit, the

thermo sensor.

The main unit has large read-outs for indoors temperature,

calendar clock and temperatures collected and transmitted by the

remote unit. The main unit can support up to three remote units.

The main unit is capable of keeping track of the maximum and

minimum temperature of different sites. And no wire installation

is required and the RMR112 operates at 433MHz.

As for the calendar clock, it is radio-controlled. It automatically

synchronizes its current time and date when it is brought within an

approximate 1500km radius of the radio signal generated from

Frankfurt, Germany (DCF77).

You can also set the calendar clock manually when it is off range.

Other features include four-language display, four-step crescendo

dual alarms and interchangeable display modes.

MAIN FEATURES

505B(1B5 9/9/04, 9:36 PM1

A. FOUR-LINE DISPLAY

Facilitates easy reading of remote and indoors temperatures

and calendar clock

B. CHANNEL BUTTON

Selects among different channels

C. MEMORY BUTTON

Recalls the maximum or minimum temperature of individual

channels

D. ALARM [24HR OFF] BUTTON

Sets the time for the alarms

E. MODE/SET BUTTON

Toggles the display modes and confirms entry while setting

the values for display

F. RADIO RECEPTION SIGNAL

Indicates the condition of radio reception

G. UP ( ▲ ) BUTTON

Advances the value of a setting

H. DOWN ( ▼ ) BUTTON

Decreases the value of a setting

I. ALARM [ AL ON/OFF] BUTTON

Enables or disables the alarms

J. RESET BUTTON

Returns all settings to default values

K. °C/°F SLIDE SWITCH

Selects between degree Centigrade ( C) and Fahrenheit (° °F)

L. BATTERY COMPARTMENTS

Accommodates two UM-3 or “AA” size 1.5V alkaline bat-

teries

M. REMOVABLE TABLE STAND

For standing the main unit on a ﬂat surface

N. WALL-MOUNT RECESSED HOLE

For mounting the main unit on a wall

MAIN FEATURES: REMOTE UNIT

Made in PRC

505B(1B5 9/9/04, 9:36 PM2

A. LCD

Displays the current temperature monitored by the remote unit

B. LED INDICATOR

Flashes when the remote unit transmits a reading

C. CHANNEL SLIDE SWITCH

Designates the remote unit Channel 1, Channel 2 or Channel 3

D. RESET BUTTON

Returns all settings to default values

E. BATTERY COMPARTMENT

Accommodates two AAA-size batteries

F. BATTERY DOOR

G. WALL-MOUNT RECESS HOLE

For mounting the main unit on a wall

H. MOVABLE TABLE STAND

For standing the remote unit on a ﬂat surface

BEFORE YOU BEGIN

For best operation,

1. Assign different channels to different remote units.

2. Insert batteries for remote units before doing so for the main

unit.

3. Place the main unit as close as possible next to the remote unit,

reset the main unit after installing batteries. This will ensure

easier synchronization between the transmission and recep-

tion of signals.

4. Position the remote unit and main unit within effective trans-

mission range, which, in usual circumstances, is 20 to 30 meters.

Note that the effective range is vastly affected by the building

materials and where the main and remote units are positioned. Try

various set-ups for best result.

Though the remote units are weather proof, they should be placed

away from direct sunlight, rain or snow.

BATTERY AND CHANNEL

INSTALLATION: REMOTE UNIT

1. Remove the screws on the battery compartment.

2. Select the channel number on the CHANNEL slide switch.

3. Install 2 alkaline batteries (UM-4 or “AAA” size 1.5V) strictly

according to the polarities shown.

4. Replace the battery compartment door and secure its screws.

Note that once a channel is assigned to a remote unit, you can only

change it by removing the batteries or resetting the unit.

505B(1B5 9/9/04, 9:36 PM3

Produktspecifikationer

Varumärke:	Oregon Scientific
Kategori:	Termometer
Modell:	RMR112
Färg på produkten:	Zwart
Förpackningens vikt:	4536 g
Användarmanual:	Ja
På / Av knapp:	Ja
Justerbar i höjdled:	Nee
Beeldscherm:	LED
Skärm diagonal:	21.5 "
Upplösning:	1920 x 1080 Pixels
Pekskärm:	Nee
Original bildförhållande:	16:9
Videolägen som stöds:	1080p
Betraktningsvinkel, horisontell:	170 °
Betraktningsvinkel, vertikal:	160 °
Medföljande kablar:	AC, Audio (3.5mm), DVI, VGA
Typiskt kontrastförhållande:	1000:1
Inkluderar AC-adapter:	Ja
VGA (D-Sub) port(ar):	1
DVI-port:	Ja
Monteringsalternativ för kabellås:	Ja
Kabellåsspårtyp:	Kensington
Inbyggda högtalare:	Ja
Genomsnittlig effekt:	1 W
Strömförbrukning (i standby):	0.5 W
Antal högtalare:	1
Certifiering:	UL/cUL, FCC-B, CE, RoHS
Display, antal färger:	16.78 miljoen kleuren
HDCP:	Ja
HD typ:	Full HD
Ingångsström:	Ja
Ljudingångar:	Ja
Displayteknik:	LCD
Respons tid:	5 ms
Pixelpitch:	0.24825 x 0.24825 mm
Grafikupplösningar som stöds:	1920 x 1080 (HD 1080)
VESA montering:	Ja
Panelmonteringsgränssnitt:	100 x 100 mm
DVI-D-portar:	1
Ljusstyrka (typiskt):	250 cd/m²
Bildförhållande:	16:9
Integrerad TV-tuner:	Nee
Inbyggd kamera:	Nee
Djup (utan bas):	48.514 mm
Höjd (utan bas):	321.056 mm
Bredd (utan bas):	506.476 mm
Vikt (utan bas):	3175 g
Plug and play:	Ja
Enhetsbredd (med stativ):	506.476 mm
Djupenhet (med stativ):	177.8 mm
Enhetshöjd (med stativ):	389.89 mm
On Screen Display (OSD):	Ja
Typ av bakgrundsbelysning:	Edge LED
Tunn klient installerad:	Nee
AC-ingångsspänning:	100 - 240 V
Strömförbrukning (typiskt):	25 W
Tiltvinkelområde:	0 - 20 °
lutningsjusteringar:	Ja