Oregon Scientific Sunrise WS902 Bruksanvisning
Oregon Scientific
Ljusterapi
Sunrise WS902
Läs nedan 📖 manual på svenska för Oregon Scientific Sunrise WS902 (4 sidor) i kategorin Ljusterapi. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/4
Sunrise Wake-up Clock
Model: WS902
USER MANUAL
EN
WAKE UP THE NATURAL WAY
Our body clock is often not in sync with the demands and
rhythm of modern life.
Our biological clock is affected by external cues, such as
sunlight. Light at dawn stimulates production of cortisol,
which gets the body ready to work and wake up. By
simulating dawn, Oregon Scientific’s Sunrise Wake-up Clock
(WS902) prepares the body to wake up by gradually
increasing brightness to the set level in the 20 minutes prior
to desired (set) alarm time.
Start your day better and feel energised to tackle the day.
Wake up as nature intended!
IMPORTANT This device does not reduce the hours of sleep
needed.
OVERVIEW
FRONT VIEW
1. SNOOZE / Motion sensor
2. / : Adjust brightness (only when LAMP function has
been activated)
3. NATURE SOUND: Toggle through selection (Forest Birds
/ Brook / Ocean / Rain)
4. SET CLOCK: Enter clock settings
5. SET ALARM: View alarm status; enter alarm settings
6. LAMP: Turn on/off light
7. + / -: Adjust volume (only when radio / soothing sound is
playing); change values of the setting
8. SLEEP: View remaining time; enable radio / soothing
sound / light sleep; set sleep timer
9. RADIO TUNE : Enable auto-search for radio
station; adjust radio frequency marginally (by 0.05MHz)
10. RADIO: Turn on / off radio
11. ALARM: Enable / disable alarm function
BOTTOM VIEW
1. Battery compartment
2. WAKE UP LIGHT ON·OFF: Enable / disable light for
alarm sequence
3. DISPLAY BRIGHTNESS HIGH·LOW: Select LCD
display brightness HIGH / LOW
4. AUDIO LINE-IN: Socket for connecting to external music
storage device
5. RESET: Reset unit to default settings
LCD DISPLAY
1. AM/PM
2. Beep / Radio / Rooster crow alarm
selected
3. Alarm with wake up light enabled
4. Batteries low / no battery
5. Alarm time
6. Radio Mode is ON and frequency is displayed
7. Volume is displayed
8. Sleep mode is ON and remaining time is displayed
9. Nature sound selected (1-4)
10. Sound from external source plugged into unit
GETTING STARTED
REPLACING LAMP
For first time use, take out provided light bulb and go directly
to step 4.
1. Unplug unit from wall socket and allow unit (bulb) to cool
for approx. 15 minutes.
CAUTION Always allow unit to cool for 15 minutes prior to
cleaning, storing, replacing parts as unit can be very hot.
2. Push in OPEN / COVER tab to release lamp cover. Lift
cover off.
3. Unscrew old bulb.
4. Screw in new bulb.
5. Push in OPEN / CLOSE tab and slide lamp cover back in
place.
NOTE This unit uses 75 W light bulbs. The built-in protection
feature will automatically shut down the unit when the
temperature inside the lamp cover is too high. Please allow
this unit to cool until the temperature inside is within a safe
range.
CONNECT TO POWER SOURCE
Memory backup:
1. Remove the battery compartment cover.
2. Insert the batteries (2xAAA), matching the polarities.
3. Replace the battery compartment cover.
NOTE Batteries should not be exposed to excessive heat
such as sunshine or fire.
Before selecting a location to place the unit, consider the
following:
• Ensure there is approximately 15 cm between unit and
closest object, such as walls or other objects.
• Ensure there is at least 40 cm space above the top of the
unit for ventilation purposes.
• Ensure distance between unit and wall socket is not
longer than the power cord itself.
Batteries serve as a back-up power supply. To fully utilize all
features, plug into wall socket.
To completely disconnect from power, the unit should be
disconnected from the wall socket.
NOTE The main unit should not be exposed to wet conditions.
No objects filled with liquid, such as vases, should be placed
on the main unit.
CLOCK
MANUALLY SET CLOCK
1. Press SET CLOCK to enter setting mode.
2. Press + or - to change the settings or press and hold + / –
to rapidly change the settings.
3. Press SET CLOCK to confirm and move to next setting.
The settings order is: 12/24 hr format, time.
RADIO
To activate / deactivate radio:
• Press RADIO to turn radio on / off.
To set radio station:
1. Press RADIO to turn radio on.
2. Press and hold RADIO TUNE to auto search or
press RADIO TUNE to manually select frequency.
SOOTHING NATURE SOUNDS
NOTE Deactivate radio first. Radio OFF will be displayed on
screen.
To activate / deactivate soothing sounds:
1. Press NATURE SOUND to play sounds.
2. Press NATURE SOUND repeatedly to select desired
sound (1-4) or to turn sound off.
ADJUST VOLUME
To adjust volume:
• Press + / – when radio or nature sound is turned on.
TIP Press and hold + / – to rapidly adjust volume.
ALARM
To set the alarm:
1. Press SET ALARM to enter setting mode.
2. Press + / - to change the settings or press and hold + / –
to rapidly change the settings.
3. Press SET ALARM to confirm and move to next setting.
4. Repeat steps 2-3 for all setting options.
The settings order is: time, alarm sound (select from
beep/radio/rooster crow)
NOTE If radio alarm is selected, radio will play for 60 minutes
at set alarm time.
For your convenience, the volume and radio frequency will be
stored in memory for the next time radio is turned on.
To activate / deactivate alarm:
• Press ALARM.
To silence the alarm:
• Wave your hand in front of the unit (motion sensor) to
silence it for 8 minutes
OR
• Press any button to turn the alarm off and activate it again
after 24 hours.
ALARM WITH WAKE UP LIGHT
To activate / deactivate wake up light:
• Slide WAKE UP LIGHT switch to ON / OFF.
When wake up light has been activated, will be displayed
next to ALARM on the LCD screen.
NOTE Light will fade-in (gradually increase in brightness) 30
minutes prior to set alarm time. Light will stay on (even after
SNOOZE has been pressed) after set alarm time for 60
minutes.
SLEEP TIMER
To adjust sleep timer setting:
1. Turn on desired option:
OPTION PRESS:
Radio RADIO
Light LAMP
Soothing sound NATURE SOUND
2. Press SLEEP to activate.
3. Press SLEEP repeatedly to change the sleep timer
setting (120, 90, 60, 30, 15, 0 min).
After 5 seconds of inaction, the timer will automatically be
confirmed and set.
To view time remaining:
• Press SLEEP.
TIP Press SLEEP again to change sleep timer (120, 90, 60,
30, 15, 0 min).
NOTE Ensure radio or sound and/or light has been selected
to activate sleep timer.
NOTE If light option has been chosen for sleep timer, light
will fade out.
READING LAMP
To turn on / off light:
• Press LAMP located at the bottom left of LCD display.
To adjust level of brightness:
• Press / to increase or decrease brightness.
TIP Press and hold / to rapidly change level of
brightness (1-20).
For your convenience, the level of brightness will be stored in
memory for the next time light is turned on.
NOTE Do not look directly at the light.
PLAY MUSIC
Using a cable, plug one end to your music storage device
and one end to AUDIO LINE-IN located at the back of unit.
When device has been successfully connected, will
be displayed on the LCD screen and sound will emit from
speakers.
LCD BACKLIGHT
To adjust brightness:
• Slide DISPLAY BRIGHTNESS switch to LOW / HIGH.
RESET
1. Remove and reinsert the batteries.
2. Press RESET to return to the default settings.
SNOOZE
To silence the alarm:
• Wave your hand up to 8 cm (3 inches) in front of the
SNOOZE IR motion sensor to silence it for 8 mintues
( will blink during this time)
OR
• Press any key to turn the alarm off and activate it again
after 24 hours.
SPECIFICATIONS
MAIN UNIT
TYPE DESCRIPTION
H x W x D 257 x 199 x 140 mm
(10.12 x 7.84 x 5.51 in)
Weight 386 g (13.6 oz)
without battery
FM 87.5 to 108 MHz
Power Input: AC 220-240V
50/60Hz (EU version)
Input: AC 100-120V
50/60Hz (US/Canada
version)
2 x UM-4 (AAA) 1.5V
batteries (for backup)
PRECAUTIONS
• Do not subject the unit to excessive force, shock, dust,
temperature or humidity.
• Do not cover the ventilation holes with any items such as
newspapers, curtains etc.
• Remove dust regularly with a dry cloth. Accumulated dust
poses a potential fire hazard.
• Do not immerse the unit in water. If you spill liquid over it,
dry it immediately with a soft, lint-free cloth.
• Do not clean the unit with abrasive or corrosive materials.
• Do not tamper with the unit’s internal components. This
invalidates the warranty.
• Only use fresh batteries. Do not mix new and old batteries.
• Images shown in this manual may differ from the actual
display.
• When disposing of this product, ensure it is collected
separately for special treatment.
• Placement of this product on certain types of wood may
result in damage to its finish for which Oregon Scientific
will not be responsible. Consult the furniture
manufacturer's care instructions for information.
• The contents of this manual may not be reproduced
without the permission of the manufacturer.
• Do not dispose old batteries as unsorted municipal waste.
Collection of such waste separately for special treatment
is necessary.
• Please note that some units are equipped with a battery
safety strip. Remove the strip from the battery
compartment before first use.
NOTE The technical specifications for this product and the
contents of the user manual are subject to change without
notice.
ABOUT OREGON SCIENTIFIC
Visit our website (www.oregonscientific.com) to learn more
about Oregon Scientific products. If you're in the US and
would like to contact our Customer Care department directly,
please visit: www2.oregonscientific.com/service/support
OR
Call 1-800-853-8883.
For international inquiries, please visit:
www2.oregonscientific.com/about/international
EU-DECLARATION OF CONFORMITY
Hereby, Oregon Scientific, declares that this Sunrise Wake-
Up Clock (model: WS902) is in compliance with the essential
requirements and other relevant provisions of Directive
1999/5/EC. A copy of the signed and dated Declaration of
Conformity is available on request via our Oregon Scientific
Customer Service.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This
device must accept any interference received, including
interference that may cause undesired operation.
WARNING Changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV
technician for help.
DECLARATION OF CONFORMITY
The following information is not to be used as contact for
support or sales. Please call our customer service number
(listed on our website at www.oregonscientific.com), or on the
warranty card for this product) for all inquiries instead.
We
Name: Oregon Scientific, Inc.
Address: 19861 SW 95th Ave.,Tualatin,
Oregon 97062 USA
Telephone No.: 1-800-853-8883
declare that the product
Product No.: WS902
Product Name: Sunrise Wake-Up Clock
Manufacturer: iPM Concepts Limited
Address: Block C, 9/F, Kaiser Estate,
Phase 1, 41 Man Yue St., Hung Hom,
Kowloon,
Hong Kong
is in conformity with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: 1) This device may
not cause harmful interference. 2) This device must accept
any interference received, including interference that may
cause undesired operation.
Produktspecifikationer
| Varumärke: | Oregon Scientific |
| Kategori: | Ljusterapi |
| Modell: | Sunrise WS902 |
Behöver du hjälp?
Om du behöver hjälp med Oregon Scientific Sunrise WS902 ställ en fråga nedan och andra användare kommer att svara dig
Ljusterapi Oregon Scientific Manualer
30 Augusti 2024
Ljusterapi Manualer
- Ljusterapi Philips
- Ljusterapi Klarstein
- Ljusterapi Beurer
- Ljusterapi Lanaform
- Ljusterapi Medisana
- Ljusterapi Marquant
- Ljusterapi Lumie
- Ljusterapi Auriol
- Ljusterapi TFA
- Ljusterapi BIOS Medical
- Ljusterapi Kogan
- Ljusterapi Sunrise
- Ljusterapi BioBrite
- Ljusterapi Prologue
- Ljusterapi Davita
- Ljusterapi Apira Science
Nyaste Ljusterapi Manualer
11 Oktober 2024
25 September 2024
25 September 2024
25 September 2024
22 September 2024
19 September 2024
19 September 2024
17 September 2024
16 September 2024
16 September 2024